What to Do When There Is Abnormal Noise from the Tires While Driving?

1 Answers
VonPreston
07/25/25 9:40pm
Reasons and solutions for abnormal noise from the tires while driving are as follows: 1. Rhythmic abnormal noise occurs at low speeds, and the noise diminishes at high speeds. Fault cause: The vehicle's four-wheel alignment is inaccurate, long-distance driving causes significant tire wear, leading to uneven tire wear and abnormal noise. Solution: First, perform a four-wheel alignment, then replace the tires. 2. Abnormal noise is not obvious at low speeds, but uniform noise occurs at high speeds. Fault cause: This phenomenon occurs when a wheel bearing of the vehicle is damaged. Solution: Go to a service station to diagnose the noisy part, determine the issue, and replace the tire.
Was this review help?
8
5
Share
More Forum Discussions

What is the safe distance for a car?

The safe distance for a car is as follows: 1. When a motor vehicle is driving on the highway at a speed exceeding 100 kilometers per hour, it should maintain a distance of more than 100 meters from the vehicle in front in the same lane. When the speed is below 100 kilometers per hour, the distance from the vehicle in front in the same lane can be appropriately shortened, but the minimum distance should not be less than 50 meters. 2. When a motor vehicle is driving on the highway and encounters low visibility weather conditions such as fog, rain, snow, dust, or hail, with visibility less than 200 meters, it should turn on the fog lights, low beam lights, marker lights, and front and rear position lights, and the speed should not exceed 60 kilometers per hour, maintaining a distance of more than 100 meters from the vehicle in front in the same lane. When visibility is less than 100 meters, turn on the fog lights, low beam lights, marker lights, front and rear position lights, and hazard warning flashers, and the speed should not exceed 40 kilometers per hour, maintaining a distance of more than 50 meters from the vehicle in front in the same lane. When visibility is less than 50 meters, turn on the fog lights, low beam lights, marker lights, front and rear position lights, and hazard warning flashers, and the speed should not exceed 20 kilometers per hour, and exit the highway from the nearest exit as soon as possible.
6
3
Share

How many turbos does the GTR have?

The Nissan GTR's engine has 2 turbos. Below are the specific details about the Nissan GTR: 1. The GTR is a high-performance, high-reliability, high-power sports car produced by Nissan. 2. The Nissan GTR is equipped with a 3.8-liter twin-turbocharged V6 engine with the code name VR38DETT, delivering 486 horsepower and a maximum torque of 588 Nm. It can output maximum power at 6,400 rpm and maximum torque between 3,200 and 5,200 rpm. This engine uses an aluminum alloy cylinder head and block and is paired with a 6-speed dual-clutch transmission. 3. The Nissan GTR uses a multi-link independent suspension for both the front and rear. Multi-link suspension can improve wheel contact with the ground and enhance traction.
1
0
Share

How to Solve Abnormal Noise When Starting a Car Engine?

There are generally two reasons for a sizzling sound after the engine starts: 1. If the car hasn't been moved for a long time, the engine oil will return to the oil pan. When starting the vehicle, the valves will lack the sealing and lubrication of the oil, resulting in a sizzling sound. This is a normal situation. 2. Abnormal noise from the belt during startup. In this case, it is necessary to promptly check whether the belt has a problem. Here are the solutions for belt noise: 1. If there is belt noise, first check the assembly. The noise may be caused by friction between the timing belt and the timing cover. You can loosen the screws on the timing cover by half a turn to observe if the noise disappears. 2. Next, check the condition of the generator belt. It may be the accessory belt causing the noise. If the timing belt tension is adjusted too tightly, remove the generator and air conditioning power steering belts to determine if the issue lies with these belts. 3. The timing belt tensioner may be faulty, usually requiring replacement along with the timing belt. The noise could also be due to issues with individual engine bearings. Carefully identify the specific source of the sound. If the exact cause cannot be determined, it is recommended to visit a professional repair shop for inspection to determine the cause.
16
5
Share

How to Use the S Gear?

Correct methods for using the S gear in a car are as follows: 1. Overtaking: The issue with the S gear is that it consumes much more fuel because it maintains lower gears and revs higher. The D gear is more fuel-efficient than the S gear, but it doesn't provide as direct power. Many people use the S gear for overtaking and then switch back to the D gear after completing the maneuver. 2. Carbon deposit removal: Engaging the S gear can increase the engine load and raise the temperature inside in a short time, which is beneficial for removing carbon deposits in the engine. 3. Uphill driving: Many drivers use the D gear when climbing slopes, but using the S gear provides more power, making uphill driving easier.
19
4
Share

What to do if the old Jetta's water temperature reaches 130?

The old Jetta's water temperature reaching 130 is generally caused by reasons such as water leakage, thermostat not opening, no circulation, or radiator issues. Therefore, when repairing, start with the simple aspects first, such as checking for water leakage. Due to overheating and insufficient coolant, it is necessary to first fill up with water and then start troubleshooting.
3
0
Share

How to align the timing for the old 4G64 engine?

Align the white link of the Mitsubishi Pajero Sport 4G64 engine's large crankshaft chain with the crankshaft mark. Align the purple link of the Mitsubishi Pajero Sport 4G64 engine's small chain with the white dot mark. Align the arrow of the Mitsubishi Pajero Sport 4G64 engine's balance shaft with the white link of the large chain. Align the arrow of the Mitsubishi Pajero Sport 4G64 engine's intake camshaft with the purple link of the chain.
2
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.