What to Do When the Zhidou Electric Vehicle Fails to Start?

1 Answers
ElleLynn
07/30/25 9:36am
The most common reason for a Zhidou electric vehicle failing to start is an abnormal battery, such as power loss, leakage, or being out of charge. The solutions are simple and include the following two options: jump-starting with another car's battery or directly replacing the battery at a 4S shop or repair shop. Below is a specific introduction to the Zhidou: 1. The Zhidou electric vehicle is equipped with an energy engine and features a mini body size of approximately 2763/1539/1524mm. Since it is an electric vehicle, owners should develop good battery usage habits. The charging duration should neither be too long nor too short. When the electric vehicle is low on power, avoid forcing it to continue driving. Developing good battery habits can effectively extend its service life. 2. If the owner does not drive for an extended period, they can disconnect the battery or park the vehicle when the battery charge is at 50%. The biggest issue with electric vehicles is their range. This model has a maximum range of 210km, powered by a permanent magnet DC brushless motor with a top speed of 80km/h, meeting daily commuting needs.
Was this review help?
17
1
Share
More Forum Discussions

Is running a red light determined by the rear wheels or the front wheels?

Running a red light is generally determined by the rear wheels. Electronic cameras capture three photos to make the judgment: a photo of the vehicle crossing the stop line at the intersection, including the red light signal and license plate number; a photo of the vehicle completely passing the stop line, including the red light signal and license plate number; and a photo showing the vehicle continuing to move, comparing whether the vehicle's position has changed, including the red light signal and license plate number. Capturing these three photos confirms the vehicle has run a red light. The act of running a red light is clearly defined in the "Road Traffic Safety Law." Article 26 states that traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning. A red light is a traffic signal prohibiting passage, and if a vehicle passes through an intersection during a red light, it constitutes the traffic violation of running a red light. Here are some tips to avoid running a red light: First, look at the arrow light, then the circular light: Currently, there are two types of traffic lights: arrow traffic lights and circular traffic lights. When arrow lights are present, first observe the arrow light and then the circular light to avoid running a red light. Note: When encountering a circular red light, right turns are permitted. However, if the right-turn arrow is red, right turns are prohibited; otherwise, it will be penalized as running a red light. Brake in time: When the red light turns on, ensure the front of the vehicle does not cross the stop line. If the front wheels accidentally cross and the rear wheels follow, the electronic camera will capture it, resulting in a penalty for running a red light. If the front wheels have just crossed the stop line when the light turns red, do not proceed through the intersection; wait for the green light. Check the green light countdown before proceeding: When the green light flashes, if there is a countdown, use it to judge whether to proceed. If there is no countdown and the vehicle is close to the intersection with high speed, it may proceed to avoid running a red light due to late braking. If the speed is low and the vehicle is far from the intersection, brake immediately to avoid running a red light. Article 38 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China" states: When the green light is on, vehicles are permitted to pass, but turning vehicles must not obstruct straight-moving vehicles or pedestrians. When the yellow light is on, vehicles that have already crossed the stop line may continue to pass. When the red light is on, vehicles are prohibited from passing. At intersections without non-motorized vehicle or pedestrian crossing signals, non-motorized vehicles and pedestrians should follow the motor vehicle signal. When the red light is on, right-turning vehicles may pass if they do not obstruct other vehicles or pedestrians. Running a red light is not considered illegal under the following circumstances: Extreme weather: When visibility is so low that even electronic police cannot clearly see the traffic lights, the evidence photos may be blurry. In such cases, accidental red-light running will not be penalized. Emergency situations: When transporting a critically ill patient to the hospital, running multiple red lights may be unavoidable. After delivering the patient, the driver can present proof from the hospital or the rescued individual to the traffic police for verification. If confirmed, the violation records will be cleared. If possible, calling an ambulance is recommended to avoid accidents caused by running red lights. Police direction: During peak hours, traffic police may temporarily direct traffic at key intersections. Drivers should follow the officers' hand signals. Yielding to special vehicles: Yielding to ambulances, fire trucks, or other special vehicles. If running a red light is captured by surveillance cameras while yielding, manual review will not record it as a violation. Even if recorded, drivers can apply for reconsideration at the traffic police department.
12
5
Share

Where is the production location of XPeng Motors?

XPeng Motors has two production locations, namely its self-built factory in Zhaoqing and a contract manufacturing facility by Haima Automobile in Zhengzhou. The following are relevant introductions about XPeng Motors: 1. XPeng Motors is an internet-connected electric vehicle brand under Guangzhou Xiaopeng Motors Technology Co., Ltd. 2. XPeng Motors' pure electric drive system is centered around the motor, battery, and electronic control. Among these, the motor controller, DCDC, and charger are placed in the front compartment, while the battery system is arranged under the floor of the passenger compartment. The initial version of XPeng Motors' motor achieved a power density of 10kW/L. 3. In terms of batteries, XPeng Motors' current battery pack has undergone four iterations of development, with an energy density close to 150Wh/kg. Unlike other domestic electric vehicle battery packs that use natural cooling or air cooling, XPeng Motors has designed a liquid-cooled battery pack, effectively addressing the issue of battery temperature rise.
4
2
Share

How to Handle Illegal Parking of Motorcycles?

The following is a detailed introduction to the penalties for illegal parking of motorcycles: 1. On-site illegal parking penalties: (1) Traffic police can point out the illegal act and issue a verbal warning, ordering the driver to leave immediately. (2) Generally, as long as the driver leaves quickly, there will be no fine. (3) If the driver refuses to leave and the parked vehicle obstructs other vehicles or pedestrians, the traffic police will impose a fine. 2. Non-on-site illegal parking penalties: (1) A fine will be issued with a ticket. (2) If the parked vehicle obstructs other vehicles or pedestrians, the traffic police department has the authority to tow the vehicle to a location that does not obstruct traffic or to a designated parking area by the traffic management department of the public security authority.
19
2
Share

How to Check the Engine Oil Level in a BMW X1?

The detailed method for checking the engine oil level in a BMW X1 is: Open the front hood of the vehicle, locate and pull out the dipstick, wipe the surface of the dipstick clean, reinsert it, and finally pull it out to read the scale. If the oil level is at or below the MIN (minimum) mark, it should be topped up immediately. Relevant information about engine oil is as follows: 1. Engine oil has four major functions: cooling, lubrication, cleaning, and sealing, playing a crucial role in ensuring the normal operation of the engine. As the engine operating time increases, the engine oil becomes contaminated due to factors such as high-temperature oxidation, wear particles from mechanical parts, and fuel vapor corrosion. 2. Engine oil also has a certain consumption rate during normal use, so it is necessary to regularly check the oil level and its degree of contamination, which is why engine oil needs to be changed periodically. 3. If the oil level is below the specified value and affects the engine's operation, it can cause fatal damage to the engine.
13
2
Share

Can I call a tow truck if my car is blocked?

You can call a tow truck if your car is blocked. Here is the relevant information: 1. In residential areas: If your car is blocked in a residential area, you can report it to the property management to see if they can help contact the other car owner. 2. Insurance company: Check the insurance label on the other car's windshield to find out which insurance company it belongs to. You can pretend to have scratched the other car and ask the insurance company staff to contact the other car owner. 3. Call the police for towing: You can also consider calling the police to arrange for a tow truck. As long as the other car is parked illegally, you can dial the 122 traffic accident hotline and have the police tow the car. The towing fee will then be the responsibility of the other car owner.
2
4
Share

What is the fuel consumption per 100 kilometers of the Geely Xingrui?

Geely Xingrui's MIIT fuel consumption is 6.7L/100km. Additional information: 1. Definition of fuel consumption: Fuel consumption generally refers to constant-speed fuel consumption. Constant-speed fuel consumption is the vehicle's fuel consumption per 100 kilometers obtained in the constant-speed driving fuel consumption test specified by national standards for certain types of vehicles. 2. These types of vehicles include: (1) M1 category, M2 category with a maximum design total mass not exceeding 3.5t, and N1 category compressed natural gas vehicles; M1 category and N1 category vehicles with a maximum design total mass not exceeding 3.5t, tested according to the method specified in GB/T-12545.1-2008 "Test methods for fuel consumption of passenger cars". (2) M2 category, M3 category with a maximum design total mass exceeding 3.5t, and N2 category, N3 category compressed natural gas vehicles; M2 category, M3 category, and N category vehicles with a maximum total mass greater than or equal to 2t, tested according to the method specified in GB/T-12545.2-2001 "Test methods for fuel consumption of commercial vehicles".
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.