What to Do When the Wuling Rongguang's Battery is Dead and the Car Won't Start?

1 Answers
MacAaliyah
07/29/25 8:10pm
If the battery is dead and the car won't start, you can try push-starting, jump-starting with jumper cables, or towing it to a 4S shop for repair using a flatbed rescue vehicle. The lifespan of a Wuling Rongguang battery is generally 2 to 3 years. Beyond this period, pay special attention to battery maintenance and replace it promptly when necessary to avoid potential hazards. Here are more detailed solutions: 1. Push-starting: Push-starting is the most familiar and effective emergency starting method, but it should only be used as a last resort and not frequently. This method can cause some damage to the engine and clutch, especially in automatic transmission vehicles, which should avoid this method. If there are no passengers, try asking pedestrians for help. First, shift into first gear, press the clutch, turn the key to the ACC position, and have helpers push the car from behind. Once the car gains speed, release the clutch, and the car will start due to inertia. 2. Jump-starting with jumper cables: If you don't have an emergency starter, you can ask nearby car owners for help to jump-start your car. Be careful not to connect the positive and negative terminals incorrectly—remember, positive to positive and negative to negative. Otherwise, connecting positive to negative will cause a short circuit. Locate the batteries of both cars, identify the positive and negative terminals (usually marked with a red cover and a plus sign). Remove the terminal covers and clamp the red jumper cable onto the positive terminal. Connect the red cable first, then the black one. Once all four terminals are connected, the jump-start is ready. After the cables are connected, start the dead car to charge the battery. 3. Towing: As a last resort, you can tow the car. First, find a sturdy tow rope and securely tie the front and rear of both vehicles together. Then, start towing slowly, ensuring both cars maintain the same speed. Pay attention to traffic safety and notify the towing vehicle if another car approaches from behind, then slowly pull over to the roadside.
Was this review help?
14
0
Share
More Forum Discussions

Why Are There Few Pajeros Traveling to Tibet?

After all, the Pajero was born for such terrains. The general manager of Mitsubishi China once said that the Pajero is designed for users who need to drive on roads where there are no roads—this is the essence of the Pajero. It can be seen that the Pajero is very suitable for traveling to Tibet, so why are there so few Pajeros making the trip? The main reason is likely probability factors. Below are some relevant introductions about the Pajero: 1. Exterior Design: The design is boxy, with the front face bearing the golden "PAJERO" logo. The overall style remains traditionally rugged and off-road. Whether it looks good or not varies from person to person, but for friends who love off-roading, it is absolutely adored. 2. Interior: The interiors of most off-road vehicles tend to appear quite modest, and the Pajero is no exception. The wood-grain decoration seems to hark back to the 1990s. However, this traditional style still attracts many older consumers, while younger ones might prefer the Prado's combination of ruggedness and modernity. 3. Powertrain: It still features a 3.0L naturally aspirated V6 engine paired with a 5-speed automatic transmission, with a maximum power output of 128KW. The powertrain performance is the Pajero's biggest drawback. Since the domestically imported Pajero has always been equipped with the 6G72 engine—an engine born in 1988—its advantage naturally lies in durability and stability. 4. Configuration: There is no significant difference in technology and comfort configurations between the low-end and high-end models. Standard features across the lineup include an electric sunroof, rear radar, reverse camera, power-adjustable driver's seat, front seat heating, front and rear center armrests, automatic air conditioning, rear air vents, and a central control screen.
13
5
Share

What is the fuel consumption of the GAC Trumpchi GS4?

GAC Trumpchi GS4 has a fuel consumption of approximately 8 to 9 liters per 100 kilometers. Here are some other aspects of the vehicle: 1. Dimensions: The GAC Trumpchi GS4 measures 4510mm in length, 1852mm in width, and 1708mm in height, with a wheelbase of 2650mm. 2. Powertrain: The 1.3T engine delivers a maximum power of 101kW (137Ps) and a peak torque of 202N·m; the 1.5T engine produces a maximum power of 112kW (152Ps) and a peak torque of 235N·m.
11
4
Share

How Often Do Small Cars Need to Undergo Inspection?

Vehicle inspection frequency is determined based on the type of vehicle. Except for family cars that are exempt from inspection for the first 6 years, other vehicle types must undergo inspections according to the specified schedule. Below are the relevant details: 1. Specific Rules: Operational passenger vehicles must be inspected once a year within the first 5 years; after reaching or exceeding 5 years, they must be inspected every 6 months. Trucks and large or medium-sized non-operational passenger vehicles must be inspected once a year within the first 10 years; after reaching or exceeding 10 years, they must be inspected every 6 months. Motorcycles must be inspected once every 2 years within the first 4 years; after reaching or exceeding 4 years, they must be inspected once a year. Dedicated school buses must be inspected every 6 months from the date of registration. Non-dedicated school buses must be inspected every 6 months after obtaining the school bus license plate. 2. Notes: When providing the vehicle registration certificate and the compulsory third-party liability insurance policy, the vehicle safety technical inspection agency must conduct the inspection, and no additional conditions may be imposed by any unit. If the vehicle meets the national safety technical standards, the traffic management department of the public security authority must issue an inspection compliance mark.
13
5
Share

Is it illegal to tie things on the roof of an SUV?

SUV roof tying items exceeding the regulated height is considered illegal. Below is an introduction to the relevant content: 1. Luggage height: Generally, the height of a roof luggage box should not exceed 0.5 meters. 2. Luggage rack: Vehicles not originally equipped with a luggage rack cannot install one, let alone tie items. 3. Regulations: Different regions have varying regulations on tying items on SUV roofs. Generally, the width of the tied items should not exceed the vehicle's width, and as long as the length and height are not excessively unreasonable and do not affect driving safety, it will not be treated as illegal. Below are two major characteristics of SUVs: 1. Sportiness: They should be capable of running, not only with fast acceleration and high top speed but also with high versatility and strong adaptability. 2. Multifunctionality: They can not only carry passengers with strong comfort but also have excellent cargo-carrying capacity and strong towing ability.
7
4
Share

Can I Transfer to Another Driving School After Passing Subject 1?

You can transfer to another driving school after passing Subject 1 of the driver's license test. Here are the specific methods for handling the transfer after passing Subject 1: 1. If you want to change driving schools due to issues with the original driving school after enrollment: You can report it to the relevant authorities. 2. If you want to change driving schools due to issues with the original driving school after completing Subject 1: For reasons related to the driving school, the student can negotiate with the driving school. 3. If you want to change driving schools for personal reasons after completing Subject 1: You need to negotiate with the driving school.
12
4
Share

Is Adding Sealing Strips to Cars Useful?

Adding sealing strips to cars is useful. The main functions of car sealing strips are as follows: 1. Waterproofing: Primarily, they prevent external liquids and gases from entering the car, such as rainwater during rainy days, thus avoiding interference with the driver's normal operation. 2. Noise reduction: Additionally, while driving on the road, sealing strips can reduce wind noise and provide certain shock absorption, dustproofing, and decorative effects, simultaneously enhancing the driver's comfort and protecting the car body components. Precautions for replacing car sealing strips: 1. Before replacing the sealing strips, it is essential to select the appropriate style based on the ones used in your specific car model. Currently, there are many professional vehicle sealing shops in the market that customize sealing strips for different car models, ensuring precise matching with the original car's curve slope and curvature. This maintains continuity between various parts of the car body, avoids airflow separation at joints, easily resolves periodic wake flows, reduces wind noise at high speeds, and enhances the car's original airtightness and dustproof capability. 2. After selecting the sealing strips, remove the old ones before installation. Clean the areas to be covered by the new sealing strips thoroughly, especially residual glue, old dust, and sand. If possible, applying a layer of protective agent is recommended, as it can prevent the sealing strips from aging and significantly improve their sealing performance.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.