What to Do When the Wuling Hongguang Mini Runs Out of Battery?

2 Answers
KalebLee
07/24/25 5:18pm
When your car battery runs out of power, there are simple solutions: jump-starting, replacing the battery, or pushing the car. However, pushing requires two conditions: the car must be a manual transmission (this method doesn't work for automatic transmissions), and you'll need someone to help. Additionally, the Wuling Hongguang Mini takes 6.5 hours to charge. Some specifications of the Wuling Hongguang MINI: 1. Battery Energy: The battery pack has capacities of 13.9kWh and 9.3kWh. 2. Range: It offers two NEDC range options: 170 km and 120 km. 3. Battery Location: The battery is located beneath the chassis. 4. Charging Time: The vehicle can be charged using a standard 220V three-pin household power outlet with grounding. The charging power is less than 2kW, and the charging duration is approximately 6 to 9 hours.
Was this review help?
13
3
Share
Charles
08/11/25 9:33am
I've been driving the Wuling Hongguang Mini for a while now, and running out of battery can be quite annoying. I remember one time when I was careless before heading out and ended up stranded halfway with a depleted battery. At that moment, I quickly pulled over to the side of the road, turned on the hazard lights to ensure safety, and then used a navigation app on my phone to find the nearest charging station. The Wuling model can use standard slow-charging stations; just plug in the charging cable and you're good to go. If you don’t have a charging cable in the car, check if there are any public charging stations nearby or ask for help in community groups to have someone bring you a cable. It’s best to develop a charging habit, like charging when the battery drops to 30%, to avoid rapid acceleration that drains the battery too quickly. Additionally, I recommend installing an electric vehicle app to monitor the remaining range in real-time and plan your trips accordingly. These small tips can help prevent similar troubles and ensure a smooth and worry-free driving experience.
Was this review help?
4
0
Share
Expand All
More Forum Discussions

What engine is used in the Geely Haijing?

Geely Haijing uses an in-line dual overhead camshaft multi-point electronic fuel injection engine. Haijing Engine: In-line dual overhead camshaft multi-point electronic fuel injection engine. This engine was independently developed by Geely Automobile, featuring lightweight, ultra-durability, and low fuel consumption. Its high-efficiency power output leads its class. It is also matched with the transmission. The technical operation quality of the Haijing is one step ahead of its peers. The Geely Haijing, with its advantages such as spacious interior, human-voice technology, safety configurations, and cost-effectiveness, enables consumers to further meet their car purchasing needs that balance family and business use, practicality, and cost-effectiveness. Haijing Power: The Geely Haijing features a straight waterfall-style front grille decoration, very clean side lines, and a very atmospheric rear with dual exhaust pipes. In addition to intelligent continuously variable intake timing technology, it also uses an electronic accelerator control system to optimize engine fuel supply, improving both engine power and fuel economy. Front dual airbags, pre-tensioned seat belts, and other safety equipment provide all-around protection for the owner. Four-wheel disc brakes, retractable suction forming the pipe strut, collision safety cut-off system, etc., prevent potential hazards in advance for the Haijing.
15
5
Share

Is the MG5 Youth Style Edition an automatic transmission?

The MG5 Youth Style Edition is available with automatic transmission models. The latest MG5 has two automatic transmission models: One is a CVT continuously variable transmission, and the other is a 7-speed dual-clutch transmission. Both transmission methods are excellent, providing a certain sense of acceleration during startup, and the coordination between the engine and transmission is also very good, with no noticeable jerking during gear shifts. Starting an automatic transmission: The starting method for the MG5 automatic transmission models is very simple. First, enter the car, adjust the seat and mirrors, fasten the seatbelt, then press the brake, shift the gear to neutral, start the vehicle, then shift the gear to D (Drive), release the handbrake completely, turn on the left turn signal, observe the surroundings for safety, slowly release the brake, and then gently press the accelerator to start successfully. Outstanding power performance: The new car is equipped with two engines in terms of power: a 1.5T and a 1.5L. The 1.5T engine has a maximum power of 127kw and a maximum torque of 275n per m. The 1.5L engine has a maximum power of 88kw and a maximum torque of 150n per m.
10
2
Share

What kind of windshield washer fluid does Mercedes-Benz use to avoid triggering an alarm?

Mercedes-Benz uses windshield washer fluid with sufficient electrolytes to avoid triggering an alarm. Reasons for the "Please refill washer fluid" fault in Mercedes-Benz: When a Mercedes-Benz displays "Refill washer fluid," it means the system has detected a low level of windshield washer fluid. Insufficient fluid can prevent the washer from spraying properly during windshield cleaning, creating a driving hazard. When this warning appears, it is necessary to add windshield washer fluid. Another possible cause is the use of non-compliant washer fluid, which triggers an alarm on the dashboard. Replacing it with new, compliant washer fluid can resolve the issue. This happens because the washer fluid is "too clean." Mercedes-Benz models are equipped with a capacitive windshield washer fluid level sensor, which requires sufficient electrolytes in the fluid to function properly. If there are too few electrolytes, the sensor cannot detect the fluid level, leading to an alarm. How vehicle windshield washer fluid works: The working principle of vehicle windshield washer fluid involves a pump motor located at the bottom of the washer fluid reservoir. When activated via the wiper combination switch, the pump motor operates, drawing the fluid from the reservoir and pressurizing it to spray out through the windshield nozzles. This process, combined with the vehicle's wipers, cleans the front and rear windshields.
1
1
Share

What is the fuel consumption of the Alto?

The Alto has 2 models. Among them, the 2016-1.0L-Manual Luxury XuanDong Edition is equipped with a 71 horsepower engine, with an NEDC fuel consumption of 5.2L per 100km. The 2016-1.0L-Automatic Luxury XuanDong Edition is equipped with a 71 horsepower engine, with an NEDC fuel consumption of 5.7L per 100km. The fuel tank capacity of the Alto is 35L. The distance that different models can travel with a full tank of fuel is as follows: 2016-1.0L-Manual Luxury XuanDong Edition: 35/5.2*100=673km. 2016-1.0L-Automatic Luxury XuanDong Edition: 35/5.7*100=614km. The fuel consumption of a car is directly related to five major factors: driving habits, the car itself, road conditions, natural wind, and environmental temperature. Specific factors that increase car fuel consumption are as follows: Driving habits: Aggressive driving, such as sudden acceleration, frequent overtaking, and not releasing the throttle in advance when encountering a red light, will increase fuel consumption. The car itself: Cars with larger displacements consume more fuel than those with smaller displacements because larger displacements generally mean greater power, requiring more gasoline to burn and perform work. Cars with greater weight will have higher fuel consumption because greater weight requires larger driving torque. Road conditions: Dirt roads, muddy roads, soft surfaces, mountain roads, etc. Driving on these surfaces increases resistance and fuel consumption. Natural wind: Driving against the wind or on windy days increases car resistance and fuel consumption. Low environmental temperature: When the engine block temperature is low, the gasoline injected during cold starts is not easily atomized, requiring more gasoline to be injected for combustion, increasing fuel consumption. At the same time, when the temperature is low, the engine computer will control the engine to use higher RPMs to warm up the car, which also increases fuel consumption.
3
3
Share

What are the reasons for the high fuel consumption of Nissan Tiida?

Nissan Tiida's high fuel consumption is caused by poor fuel flow. Poor fuel flow: Clogged fuel lines lead to excessive carbon buildup, resulting in high fuel consumption. Abnormal braking: Brake pads not retracting cause the vehicle to remain in a braking state while driving. Additionally, high fuel consumption during the break-in period of a new car is normal, and fuel consumption will gradually decrease after the first maintenance. Moreover, fuel consumption depends on individual driving habits and road conditions. On highways or smooth roads, it's difficult to achieve high fuel consumption. Impact of temperature: Increased fuel consumption due to temperature changes is normal. Generally, in winter, when temperatures are low, fuel consumption tends to increase, almost equivalent to fuel consumption when using air conditioning in summer. This is because low temperatures cause the engine to dissipate more heat. Additionally, winter warm-up times are longer, requiring more time and fuel to reach normal water temperature from startup. Impact of prolonged lack of maintenance: Dirty engine oil and air filters can also lead to increased fuel consumption. Dirty engine oil results in poor lubrication, increasing resistance in various moving parts of the engine, which requires more energy to overcome, thereby increasing fuel consumption. Regular vehicle maintenance is necessary.
19
4
Share

Does the Boyue have a brake pad warning?

Boyue has a brake pad warning. Brake pad warning: When the Boyue's brake pads are worn out, the vehicle will automatically detect it and display a warning on the dashboard to alert the owner. Driving without brake pads can lead to ineffective braking and additional wear, so it is important to replace the brake pads promptly. Automotive brake pads: Also known as brake linings, automotive brake pads are friction materials fixed to the brake drums or discs that rotate with the wheels. The friction linings and blocks bear external pressure to generate friction, thereby slowing down the vehicle. Automotive brake pads are generally composed of a steel plate, an adhesive heat insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure quality by detecting the temperature distribution during coating. The heat insulation layer is made of non-conductive materials to provide thermal insulation. The friction block consists of friction materials and adhesives, which are pressed against the brake disc or drum during braking to generate friction, thereby achieving vehicle deceleration and stopping. Due to friction, the friction block gradually wears out. Generally, lower-cost brake pads wear out faster. Once the friction material is depleted, the brake pads should be replaced promptly to prevent direct contact between the steel plate and the brake disc, which could ultimately result in loss of braking effectiveness and damage to the brake disc.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.