What to Do When the Windshield Wiper Doesn't Spray Water?
4 Answers
The solutions for a windshield wiper not spraying water are: 1. Check if the windshield washer fluid is low or needs to be refilled; 2. Inspect the hose for damage or loose connections; 3. Examine the motor and its wiring; 4. Check if the filter screen is clogged. The functions of the windshield wiper are: 1. Helping the vehicle maintain a safe distance from the centerline on the left side of the road; 2. Assisting the driver in determining the position of the left and right wheels; 3. Aiding in judging the distance between the right side of the vehicle and the roadside; 4. Assisting in parallel parking; 5. Removing raindrops and dust attached to the vehicle's windshield. The replacement method for the windshield wiper is: 1. Lift the wiper arm away from the windshield and keep it perpendicular to the windshield; 2. Press the tab and remove the old wiper blade; 3. Insert the new wiper and rotate it until the hook clicks into place.
I usually enjoy fixing minor issues myself. When the windshield wipers aren't spraying water, I first check if the washer fluid reservoir is empty, as this is a common situation. If it still doesn't spray after refilling with cleaning fluid, then I need to check if the spray nozzles are clogged with dust or insect remains, which can be gently cleaned with a fine needle. If the nozzles are fine, it might be that the washer pump is broken or a fuse has blown. Locate the corresponding fuse for the headlights or washer system in the engine compartment's fuse box and try replacing it. Or, the wiring connection might be loose—just squeeze the connectors to fix it. However, if none of these work, it's best not to force it and instead take it to a repair shop for inspection to prevent the problem from worsening and affecting driving safety in rainy conditions. Remember to check the washer system during regular maintenance to keep the windshield clean and reduce accident risks.
As a parent, safety is always my top priority when driving my kids to school. Having windshield wipers that don't spray water in bad weather is extremely dangerous - poor visibility can easily lead to accidents. My usual troubleshooting steps are: first check if the washer fluid reservoir is full. If it is, then inspect whether the spray nozzles are clogged and clean them with a toothbrush or small tool. Another possible issue could be the washer pump or fuse - if the fuse is blown, just locate the position indicated in the vehicle manual and replace it with a new one. However, if these DIY fixes don't solve the problem, I immediately pull over to a safe spot and call roadside assistance, or go straight to the 4S dealership for repairs to avoid wasting time and increasing risks. Preventive maintenance is also crucial - I clean the washer system every 2-3 months and add specialized cleaning agents to prevent corrosion. This protects both my car and my family.
My car had the same issue last month, and it turned out to be a cracked washer fluid reservoir leaking liquid. Simple solution: First, fill the reservoir with water and test if it sprays—if it does, problem solved. If not, check if the spray nozzles are clogged with debris; a needle poke might fix it. Then inspect the fuse or pump—most cases can be handled with DIY replacement. Only visit the repair shop if all else fails; avoid unnecessary disassembly to save money and bigger headaches. Regular checks and part replacements make it manageable.
