···
Log in / Register

What to Do When the Windshield Freezes?

4 Answers
ArielFitz
08/26/25 3:58am

Solutions for a frozen windshield: 1. Warm up the car, then turn on the interior heater. The frost will turn into water droplets, which can be easily cleared with the windshield wipers, allowing normal use of the car; 2. Use a towel to wipe. After some melting from the morning sun, the ice on the windshield can be cleaned by simply wiping it with a towel; 3. Use an ice scraper to gently scrape off the ice; 4. Pour warm water. If the ice on the windshield is very stubborn, hot water can be used. The high temperature of the hot water will help melt the ice on the windshield quickly.

Was this review help?
7
3
Share
OGabrielle
09/08/25 4:56am

I often encounter the problem of windshield icing in winter. As a seasoned driver with years of experience, I find that the most practical solution is prevention. When parking at night, I try to park the car in a garage or cover the windshield with a specialized windshield cover, so there’s basically no ice the next day. If I didn’t take preventive measures and the windshield ices over, I start the engine and turn the heater to maximum, directing the hot air at the windshield. After a few minutes, when the ice softens, I carefully scrape it off with an ice scraper. Never pour hot water on it, as the extreme temperature difference can cause the glass to crack. A spray mixture of alcohol and water also works well—you can buy it at the supermarket or make it yourself. Safety comes first; poor visibility due to ice can easily lead to accidents, so I patiently clean it off or don’t mind being late. In short, forming good habits is key, such as opening the windows after parking to reduce moisture buildup, so you won’t panic the next time you head out.

Was this review help?
18
1
Share
Expand All
GabrielleAnn
10/22/25 5:00am

Frost on the windshield is really annoying, and I'm used to dealing with it in a simple way. As soon as I wake up in the morning, I start the car engine, turn on the heater and set it to the windshield mode, then patiently wait for the ice to melt on its own. This saves some effort, but if I'm in a hurry, I'll use de-icing spray, which works quickly and is inexpensive. For prevention, I cover the glass with an old blanket or buy a special anti-ice cover, which is cost-effective and convenient. Remember not to move the wipers randomly, as this can damage the motor. If the ice is too thick, gently scrape it off with a credit card or a plastic scraper—avoid using metal tools to prevent scratching the glass. Combining prevention and removal makes driving safer and more comfortable.

Was this review help?
6
3
Share
Expand All
DelMason
12/05/25 5:24am

As a beginner, I was a bit at a loss when the windshield froze over, but I learned a few tricks. First, start the car and turn on the heater to blow warm air onto the windshield. Wait a few minutes until the ice begins to soften, then carefully scrape it off with an ice scraper. Don’t rush to use the wipers, as that could damage the parts. You can also use a towel soaked in warm water to wipe the ice—just make sure the water isn’t too hot. At night, after parking, I leave the windows slightly open to let air circulate and reduce moisture that could freeze the glass. Preventive sprays are also helpful; keep a bottle handy for use anytime. When clearing the ice, stay calm and ensure your visibility is clear before hitting the road.

Was this review help?
10
4
Share
Expand All
More Forum Discussions

Can I choose a license plate number again after timeout on 12123?

12123 allows re-selection after timeout during license plate number selection. 12123 license plate selection process: Log in to the online self-selection system for motor vehicle license plates: Enter the system, read the instructions, click "I have read and agree to the above agreement" to proceed to the next step. Enter vehicle and owner identification information: Input the vehicle identification number, owner identification number, and name of the selected vehicle. Enter the correct verification code as displayed on the screen. Selection notes: When all online selection attempts are exhausted on the 12123 app, you must wait until the number's validity period expires and then visit the DMV office window to reapply for the service, as online processing will no longer be available.
13
5
Share

What is the fuel consumption of the 2011 Nissan Sunny?

The average fuel consumption of the 2011 Nissan Sunny is 7.3 liters per 100 kilometers. The actual comprehensive fuel consumption is related to multiple factors such as load, road conditions, driving habits, weather, wind speed, tire pressure, etc. The actual comprehensive fuel consumption should be based on the actual driving conditions. Methods to determine fuel consumption: You can determine the fuel consumption through the car's dashboard, where F=full; E=empty. When the fuel tank light turns red, record the mileage, then note how much fuel is added. When the fuel is next exhausted, record the mileage again. Subtract the initially recorded mileage from the current mileage, then divide by the amount of fuel used to calculate the fuel consumption. Factors affecting fuel consumption: There is a certain relationship between engine displacement and fuel consumption, but a higher fuel consumption does not necessarily mean a larger displacement. In a relative sense, the size of a car's engine displacement does not directly correlate with fuel consumption. In addition to engine displacement, factors such as the car's shape, weight, and engine technology are also important factors affecting fuel consumption.
19
4
Share

What is the actual fuel consumption of the 2011 Kia K5?

The official fuel consumption (combined cycle) of the 2011 Kia K5 is 7.7L/100km. The actual comprehensive fuel consumption is related to multiple factors such as load, road conditions, driving habits, weather, wind speed, tire pressure, etc. The actual comprehensive fuel consumption should be based on the actual driving conditions. Methods to determine fuel consumption: You can determine the fuel consumption through the car's dashboard, where F=full and E=empty. When the fuel tank light turns red, record the mileage, then note how much fuel is added. When the fuel is next depleted, record the mileage again. Subtract the initial mileage from the current mileage, then divide by the amount of fuel used to calculate the fuel consumption. Factors affecting fuel consumption: There is a certain relationship between engine displacement and fuel consumption, but a higher fuel consumption does not necessarily mean a larger displacement. In relative terms, the size of a car's engine displacement does not directly correlate with fuel consumption in a proportional manner. Besides engine displacement, factors such as the car's shape, weight, and engine technology are also significant contributors to fuel consumption.
5
3
Share

What does brake fade mean?

Brake fade refers to the phenomenon where the braking force diminishes due to high temperatures generated by intense friction between the brake discs and brake pads. Under high-temperature conditions, the braking performance of the system is significantly reduced. When brake fade occurs, it is advisable to minimize sudden braking, use intermittent braking, and if the speed is not too high, find an opportunity to stop the vehicle and rest for half an hour to an hour to alleviate the fade. Below is additional information: 1. Precautions during brake fade: Brake fade occurs after continuous, high-intensity braking when components such as brake drums and discs exceed their optimal temperature range for effective braking, leading to reduced braking performance. If the temperature exceeds the limit, it can result in brake failure. When brake fade occurs, the inability to provide sufficient braking force can extend the stopping distance, compromising driving safety. In such cases, shifting to a lower gear to utilize engine braking is recommended. If the fade is severe, it is best to pull over immediately and allow the brake system to cool naturally before continuing to drive. 2. Solutions: The mainstream solution to brake fade involves adding grooves to the brake discs to aid heat dissipation and maintain some effectiveness at high temperatures. Another method is drilling holes in the brake discs. Both approaches primarily increase the heat dissipation capacity of the brake discs, delaying the onset of fade, a common practice for most family cars. For higher-performance models, special materials may be added to the brake discs, or larger-sized discs may be used, effectively postponing the occurrence of fade. Supercars often use ceramic materials with a high-density structure, infused with carbon to create carbon-ceramic brake discs, or employ special metals for disc manufacturing.
18
3
Share

Why Does the Accelerator Make Strange Noises When the Air Conditioner is On?

The detailed reasons for strange noises when stepping on the accelerator with the air conditioner on are as follows: 1. Due to compressor damage: The electromagnetic clutch of the air conditioner compressor slips, or the internal bearings of the compressor wear out due to long-term use. 2. Due to collisions during daily use of the vehicle: Or when replacing components such as the electric fan, radiator, or condenser, improper installation due to mismatched part sizes, differences in rubber sleeve sizes, or inadequate alignment of the radiator and condenser frame can cause body resonance when the electric fan operates with the air conditioner on, resulting in strange noises when accelerating. 3. Due to air conditioning system pressure issues: If the radiator or condenser surface is too dirty, leading to poor heat dissipation, the pressure in the pipes rises when the air conditioner is turned on, causing the electric fan to operate at high speed and produce strange noises. Alternatively, if the system is overcharged with refrigerant, stepping on the accelerator with the air conditioner on can increase system pressure, leading to high-speed operation of the electric fan and strange noises.
1
5
Share

How Many Kilometers Can a 125cc Motorcycle Run?

A 125cc motorcycle can run approximately 500 kilometers. The actual comprehensive fuel consumption is influenced by multiple factors such as load, road conditions, driving habits, weather, wind speed, tire pressure, etc. The actual comprehensive fuel consumption should be based on real driving conditions. Methods to Determine Fuel Consumption: You can determine the fuel consumption through the vehicle's dashboard, where F=full and E=empty. When the fuel tank's red light comes on, record the mileage, then note how much fuel is added. When the fuel is next depleted, record the mileage again. Subtract the initial mileage from the current mileage, then divide by the amount of fuel used to calculate the fuel consumption. Factors Affecting Fuel Consumption: There is a certain relationship between engine displacement and fuel consumption, but higher fuel consumption does not necessarily mean larger displacement. Relatively speaking, the size of a car's engine displacement does not directly correlate with fuel consumption in a proportional manner. Besides engine displacement, factors such as the car's shape, weight, and engine technology are also significant influences on fuel consumption.
6
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.