What to Do When the Whole Car Shakes at Speeds of 130 to 140 km/h?

2 Answers
DiAnthony
07/29/25 5:02am
Solution for whole car shaking at speeds of 130 to 140 km/h: Simply visit a 4S shop for wheel balancing. More information about wheel balancing is as follows: 1. Wheel balancing refers to the balance between wheels when the vehicle is in motion. 2. To prevent an unbalanced state during driving caused by uneven mass distribution in various parts of the vehicle, wheel balancing is necessary. 3. Regular balance checks not only extend the lifespan of car tires but also enhance driving stability, avoiding traffic accidents caused by tire wobbling, bouncing, and loss of control at high speeds.
Was this review help?
4
4
Share
StAbel
08/12/25 8:40am
I've been driving for decades and have encountered many instances of shaking at speeds above 120 km/h. The main causes could be unbalanced tires or loose wheel axles, especially noticeable at specific speed ranges like 130 to 140 km/h. High-speed shaking is risky and can easily lead to loss of control. I recommend you immediately slow down and find a safe place to stop and check the tire pressure and wear. If the tires are unbalanced, a quick visit to a nearby repair shop for a dynamic balance treatment should fix the issue. Always remember to regularly inspect your tire condition while driving, as small issues can accumulate and lead to more expensive repairs later. Safety first—never take chances and continue driving. I once ignored it when I was younger and nearly had an accident. Now, I always do preventive maintenance to avoid trouble.
Was this review help?
4
4
Share
Expand All
More Forum Discussions

What to Do When the Jetta Fuel Measurement System Is Too Rich?

The fuel detection system of the car being too rich indicates that the air-fuel mixture is too rich. It is necessary to promptly check whether the pressure of the car's intake system and the fuel pressure are within a reasonable range. If the pressure exceeds the standard, the faults in the car's intake system need to be repaired in time. Here is some information about the fuel system: 1. The function of the fuel system is to supply the engine with a certain amount of clean, well-atomized gasoline according to the operating conditions of the engine, so that it can mix with a certain amount of air to form a combustible mixture. 2. The fuel system also needs to store a considerable amount of gasoline to ensure that the car has a considerable driving range.
5
1
Share

What is the difference between plug-in hybrid and hybrid electric vehicles?

There are two main differences between plug-in hybrid and hybrid electric vehicles: 1. Power aspect. Plug-in hybrids primarily aim to enhance vehicle performance, while hybrid electric vehicles, predominantly Japanese models, focus on fuel efficiency. During registration, they are often labeled as energy-saving vehicles, such as Toyota's Dual Hybrid, whose power output is similar to or even slightly weaker than conventional fuel versions. 2. Driving aspect. Plug-in hybrids are typically equipped with large batteries, enabling pure electric driving for 50-100 kilometers. If battery costs decrease, this range may increase in the future. Hybrid electric vehicles only have small batteries and can hardly drive purely on electricity. Although they feature an EV mode, the engine must start to assist charging after just 1-2 kilometers of pure electric driving.
14
3
Share

Can the Honda Odyssey Hybrid Get a Green License Plate?

No, all hybrid models of the Odyssey are HEV (Hybrid Electric Vehicles), which fall under the category of new energy vehicles but are not eligible for green license plates. Below are the types of new energy vehicles that can obtain green license plates: 1. Pure Electric Vehicles (PEV): These vehicles derive their power from electric motors, with energy sourced from battery packs. 2. Plug-in Hybrid Electric Vehicles (PHEV): These hybrid vehicles can charge their battery packs via an external power source and also allow manual selection of power supply modes. 3. Fuel Cell Electric Vehicles (FCEV): These vehicles convert electrical energy generated from chemical reactions between hydrogen and oxygen into kinetic energy to drive the vehicle, with no environmental impact.
10
1
Share

How to Remove the Dashboard of Baojun 560?

Baojun 560's dashboard cover is combined with the dashboard through plastic clips. To remove it, simply pry open the gap between the dashboard cover and the dashboard. The specific steps for dashboard removal are as follows: 1. Remove the panel strip above the buttons on the head unit. 2. Remove the panels around the head unit. 3. Take out the clips remaining on the original plastic panel. Notes: The car dashboard mainly serves to fix electrical instruments, protect the safety of drivers and passengers, and reduce noise inside the car. Generally, it is advisable to avoid disassembling the dashboard as much as possible. If disassembly is necessary, try to only disassemble local parts of the dashboard. Vehicles with disassembled dashboards are prone to issues such as abnormal noises, poor sealing, and increased noise due to improper assembly. Disassembling the dashboard does not affect the vehicle's handling and overall performance.
8
0
Share

What does keyout mean?

keyout refers to the car key status indicator light. Here is the relevant content introduction: Reasons for the keyout indicator light to illuminate include: 1. The car's smart key is not inside the vehicle or is too far away, exceeding the specified distance range. 2. The key battery is low on power, causing the key signal to be too weak and failing to receive the signal. 3. The smart key system or wireless module is damaged or malfunctioning. The car smart key is a common keyless entry system, also known as the smart key system. It consists of a transmitter, remote central lock control module, driving authorization system control module, three receivers, and the related wiring harnesses that form the control system.
16
2
Share

What is the standard wheelbase of the BMW 3 Series?

The standard wheelbase of the BMW 3 Series is 2920mm. Below are detailed specifications about the BMW 3 Series: 1. The BMW 3 Series is a new generation sedan product from BMW Group, with a body weight of 1465kg, equipped with an inline 4-cylinder gasoline engine. Vehicle dimensions are 4.734 meters in length, 1.811 meters in width, and 1.455 meters in height. 2. Top speed ranges from 218 to 250km/h, with a 0-100km/h acceleration time of 9.8 seconds. 3. The interior features exquisite craftsmanship and premium materials, with leather seats offering good support and comfort. The center console and display screen present an elegant and aesthetically pleasing appearance. 4. Safety equipment includes front dual airbags, front and rear head airbags, side airbags for driver and front passenger, active protection system, front and rear parking distance sensors, run-flat tires, and tire pressure monitoring system.
6
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.