What to Do When the Water Temperature Warning Light Comes On?

1 Answers
SanMadelyn
07/29/25 4:40pm
When the water temperature warning light comes on, you should stop and check the vehicle. Here are the relevant instructions: Stop Without Turning Off the Engine: Park the vehicle in a safe area and do not turn off the engine. Let the engine continue running at idle speed, and open the hood to allow heat to dissipate. If you see steam rising from the hood, observe first and avoid opening it hastily to prevent burns. Check the Coolant: First, check if the coolant level in the auxiliary tank is too low. Open the engine hood and inspect the coolant level in the auxiliary tank. If the coolant level is below the 'min' line, it indicates that the coolant is insufficient.
Was this review help?
19
4
Share
More Forum Discussions

What does the car button 'a' mean?

Car button 'a' stands for the Brake Assist System (ABS). When the seat belt is properly fastened, pressing this button enables automatic braking for temporary stops, preventing the vehicle from rolling when the brake pedal is released. To resume driving, simply lightly press the accelerator pedal to disengage the brake and continue moving. The Brake Assist System complements the Anti-lock Braking System. ABS, or Anti-lock Braking System, is a technology developed by Robert Bosch GmbH for use in motorcycles and cars to prevent loss of control and increase braking distance, thereby enhancing vehicle safety.
12
3
Share

What is the Multivan car?

Multivan is a multi-purpose MPV from Volkswagen, based on the famous T-platform, and has always been positioned as a high-end business vehicle. Here is the relevant introduction of the Multivan: 1. Features: Headlight cleaning function, rear parking camera, electrically foldable exterior mirrors, welcome lights. 2. Safety performance: Tire pressure monitoring system, anti-lock braking system ABS, electronic stability system including electronic differential lock EDL, seat belt warning system, electronic brake force distribution system EBV, front and side airbags for the front seats, and rear curtain airbags.
18
4
Share

When will Fuzhou implement China VI emission standards?

Fuzhou began implementing the China VI emission standards on July 1, 2020. Here is relevant information about the China VI standards: 1. China VI standards: The China VI emission standards refer to the sixth-stage national standards for motor vehicle pollutant emissions testing. The requirements of the China VI emission standards are more stringent than those of the China V standards, including a 50% reduction in the carbon monoxide limit for motor vehicles, a 50% reduction in the limits for total hydrocarbons and non-methane hydrocarbons, and a 42% reduction in nitrogen oxide emissions. 2. Advantages: It can effectively shorten the time for replacing new vehicles.
14
4
Share

What are the trunk dimensions of the Teana?

Teana trunk dimensions introduction: Height 520 millimeters, widest point 1390 millimeters, narrowest point 1040 millimeters, length 1090 millimeters, trunk capacity is 586 liters, which is sufficient for daily use. Below is relevant information about the Teana: 1. Vehicle body dimensions: Length 4901 millimeters, width 1850 millimeters, height 1450 millimeters, wheelbase 2825 millimeters, front track 1620 millimeters, rear track 1620 millimeters. The vehicle is a four-door, five-seater sedan with a fuel tank capacity of 61.3 liters and a luggage compartment volume of 586 liters. 2. The Teana is manufactured by Dongfeng Nissan, which is Dongfeng Nissan Passenger Vehicle Company.
15
5
Share

What is the correct way to use Honda Brake Hold?

Correct usage of Honda Brake Hold: After activating the function, when encountering temporary stops, the vehicle can be held stationary via the brake pedal; when needing to proceed, simply pressing the accelerator pedal will release the braking force. This allows drivers to avoid prolonged braking when the vehicle is stationary. With the automatic electronic parking brake engaged, it prevents unnecessary vehicle rolling - simply put, the car won't roll backward. The auto-hold system is a technological application that automatically engages the parking brake during vehicle operation. The function of this technology is to prevent vehicle rollback, making it particularly useful on slopes and during frequent starts and stops.
13
4
Share

How to Read the Date on a Car Battery?

The battery date is usually marked on the surface of the battery, represented by a batch number. Specific instructions: 1. The first digit is a number: usually one of the 10 digits from 0 to 9, indicating the production year of the battery. 2. The second digit is a letter: usually one of the 12 letters from A to M (excluding I and L), representing the production month of the battery, with each letter corresponding to a month from January to December in alphabetical order. 3. The third digit is a letter: indicating the manufacturer of the battery. 4. The fourth and fifth digits are numbers: representing the production date of the battery. 5. The sixth and seventh digits are a combination of letters and numbers: indicating the batch of the battery.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.