What to Do When the Volkswagen Tiguan's Exhaust Pipe Emits Black Smoke?

2 Answers
Jill
07/28/25 7:25pm
Possible causes for black smoke from the exhaust pipe include issues with the oxygen sensor, leading to black smoke emission, unstable idling, and shaking during acceleration. It is necessary to use a diagnostic computer to check for fault codes. If the faults cannot be cleared, the oxygen sensor may need replacement. Check whether the air flow meter and intake pressure sensor are malfunctioning. Black smoke indicates incomplete engine combustion. Given the unstable engine idling in combination with the ignition system, it is advisable to inspect the spark plugs' condition. Regular cleaning of carbon deposits inside the engine cylinders is also recommended. The air filter needs to be replaced periodically, and fuel with an octane rating of 95 or higher should be used.
Was this review help?
20
2
Share
DeJade
08/12/25 12:28am
Last time my Tiguan's exhaust was emitting black smoke, I was really worried and rushed it to the repair shop for a check. The mechanic said the most likely issue was a rich fuel mixture, where the fuel wasn't burning completely. Common causes include leaking fuel injectors or a dirty air filter blocking the intake, and it could also be excessive pressure from the high-pressure fuel pump. Additionally, a faulty oxygen sensor might lead to excessive fuel injection. In the end, my car was fixed by cleaning the throttle body and fuel injectors, and I also replaced the air filter. It's crucial to use regular 95-octane fuel from reputable gas stations daily, as poor-quality fuel can easily cause carbon buildup and black smoke. If the car's computer reports a fault code, it's important to check and repair it promptly to avoid damaging the catalytic converter, which would be a huge loss.
Was this review help?
10
0
Share
Expand All
More Forum Discussions

Where is the USB port of Volkswagen Santana?

Volkswagen Santana's USB port is located under the air conditioning controls on the center console, where there is a USB interface. Below is more information about car USB interfaces: 1. The USB interface is a type of vehicle transmission cable, featuring fast transmission speed, ease of use, support for hot-swapping, flexible connection, and independent power supply. It is generally a universal interface for devices like USB drives and MP3 players. 2. The USB interfaces in cars are primarily for transmitting audio data. The current of car USB interfaces can be either 5V/2.1A or 5V/0.5A. Many mobile phones require an input current of 5V/1A, and the 5V/2.1A car USB can be used normally.
14
5
Share

What is the engine model of the 10th generation Accord?

L15BN is the engine model used in the 10th generation Accord, with a maximum horsepower of 194 hp, a maximum power of 143 KW, a maximum power speed of 5500 rpm, and a peak torque of 260 N.m. The engine of the 10th generation Accord is independently developed by the Honda Group and is one of the Earth Dreams engine series. For daily maintenance of the 10th generation Accord's engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, select CB--CD grade diesel engine oil based on mechanical load, with the selection standard not lower than the manufacturer's requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid faults, change the oil regularly based on usage conditions and keep the oil volume moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is blocked and oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing dirt back to the lubrication area, accelerating engine wear and internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gas, acid, moisture, sulfur, and nitrogen oxides in the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, blocking filters and oil holes, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the normal operation of the engine but also extends the overall lifespan of the radiator and engine.
12
2
Share

What Transmission Does the Livi Use?

The transmission brand used in the Livi is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Livi manual transmission uses a 5-speed manual, while the automatic transmission employs a CVT (Continuously Variable Transmission). A CVT does not have specific gear positions; its operation is similar to an automatic transmission, but the ratio changes continuously rather than through discrete gear shifts, ensuring smooth and uninterrupted power delivery. When using the Livi's transmission daily, pay attention to the following points: Do not delay transmission fluid changes for extended periods. Prolonged intervals without changing the transmission fluid can damage internal components such as bearings and the housing. Avoid coasting in neutral for long durations. While many experienced drivers coast in neutral with manual transmissions, doing so with an automatic transmission can cause overheating and create a jolt when shifting back to Drive (D). Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Some drivers shift into reverse while still moving to showcase "smooth" operation, but this severely damages transmission gears and can lead to gear grinding over time. Avoid frequently climbing steep slopes in Drive (D). Automatic vehicles may overheat under high load or shift too early, reducing climbing power. Instead, use manual mode to lock in lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle long distances. If the automatic vehicle breaks down, use a flatbed tow truck with the transmission in Neutral (N). Never tow it directly with a rope or another vehicle.
12
0
Share

Where is the fuel tank switch on a Chevrolet?

The fuel tank cap switch on a Chevrolet is located on the fuel tank cap itself. You need to first unlock the central locking system, then press the fuel tank cover panel to open it. Here is more information about Chevrolet: 1. Chevrolet is an automobile brand under General Motors (GM) of the United States, founded on November 3, 1911, by William C. Durant and Louis Chevrolet. It was acquired by GM in 1918 and is now one of GM's most international and popular brands. 2. On November 23, 2020, General Motors announced a global recall of approximately 7 million large pickup trucks and SUVs equipped with potentially dangerous Takata airbags. The recall covers full-size pickup trucks and SUVs from model years 2007 to 2014, including the Chevrolet Silverado 1500, 2500, and 3500.
1
1
Share

Where is the cabin air filter located in a Renault car?

Renault car cabin air filter is located inside the glove compartment on the passenger side. Here is more information about Renault: 1. Renault Automobile Company is named after the surname of its founder Louis Renault. The logo consists of four diamonds forming a pattern, symbolizing the integration of the three Renault brothers with the automotive industry, representing Renault's ability to compete, survive, and develop in infinite (four-dimensional) space. 2. Renault is a French vehicle manufacturer producing various types of vehicles including racing cars, compact cars, mid-size cars, recreational vehicles, and large vehicles (including trucks, construction vehicles, and buses).
4
4
Share

How to Use the Four Modes of GS8?

gs8 has four modes: D mode, E mode, M mode, and W mode. Turn the ignition switch to the ON position, and press the driving mode button on the gear shift panel repeatedly to cycle through the modes in the order of D, E, M, and W. Below is more information about the four modes: 1. D mode: By default, the transmission is in D mode, which is the ordinary D gear driving mode. 2. E mode: ECO economic mode. When the vehicle enters this mode, not only does the transmission control unit adopt a fuel-saving shift strategy, but the air conditioning also adopts a corresponding economic strategy. 3. M mode: Manual driving mode. When the transmission operates in this mode, the driver can shift up/down by pressing the "+/-" on the side of the gear lever according to road conditions and driving habits, enhancing the driving experience. 4. W mode: Winter driving mode. Driving in winter mode ensures smoother and more gentle torque output. In this mode, the transmission automatically controls the starting gear to prevent the vehicle from slipping when starting on icy or slippery roads, making it easier for the driver to control the vehicle in snowy conditions.
8
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.