What to Do When the Volkswagen Tharu's Trunk Won't Lock?

2 Answers
EmiliaMarie
07/29/25 12:08am
Solutions for a Volkswagen Tharu trunk that won't lock are as follows: 1. Check if the spring rod's hardness is appropriate. 2. Ensure the closing limit rubber block matches the locking mechanism properly. 3. Inspect the trunk's electrical circuit. 4. Examine the trunk's hydraulic support rods. Replace if any issues are found.
Was this review help?
9
4
Share
DiJeremiah
08/12/25 4:24am
When the trunk of my Tharu won't lock, I usually start by checking it myself to save both money and time. First, inspect the trunk lock opening for any obstructions like leaves or dirt, gently clean them out, and then try locking it again. If it still doesn't work, the lock cylinder might need lubrication—spray some WD-40, but avoid overdoing it to prevent dust accumulation. If the lock switch feels loose or unresponsive, it could be a mechanical issue. Don't force it if you can't fix it yourself to avoid damaging more parts. A trunk that won't lock compromises item security, so it's best to place valuables in the front seats or temporarily secure them with a rope while driving. If all else fails, take it to a professional repair shop. Common trunk lock issues in Volkswagen models are often resolved by replacing the lock assembly, costing a few hundred yuan—fixing it early saves hassle.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What is the main function of the suspension system?

The main function of the suspension system is to manage all forces and moments between the wheels and the vehicle body, such as supporting forces, braking forces, and driving forces. It also mitigates impact loads transmitted from uneven road surfaces to the body, dampens resulting vibrations, ensures passenger comfort, and reduces dynamic loads on cargo and the vehicle itself. The suspension system consists of shock absorbers, elastic elements, and guiding mechanisms. To control wheel travel and prevent interference between suspension components and other parts of the body or frame, bump stops are generally installed. In most passenger cars and buses, to avoid excessive lateral roll angles during cornering, anti-roll bars (or stabilizer bars) are commonly added.
14
3
Share

Can Electric Folding Mirrors Be Folded Manually?

Electric folding mirrors can be folded manually, but it is not recommended as it may damage the gears, cause electric failure, or lead to abnormal noises. The mirror folding function refers to the ability of the side mirrors on both sides of the car to fold and retract when necessary, which can be either manual or electric. The benefits of electric folding mirrors include: 1. Reducing parking space requirements; 2. Effectively avoiding scratches; 3. Protecting the mirror surface. Electric mirrors mainly consist of a pivot, a micro motor, a permanent magnet, and a control system. The working principle of electric mirrors involves using a control button on the dashboard to drive the motor, which then adjusts the mirror up, down, left, or right.
7
1
Share

What is the problem when the brake warning light is on?

The main reasons for the brake system warning light to illuminate are as follows: 1. Malfunction in the brake system. This can lead to poor or failed braking, unilateral braking deviation, braking noise, brake drum overheating caused by brake drag, or parking brake failure. 2. Low brake fluid level. This affects braking performance and driving safety, and the vehicle should be taken to a repair shop for inspection as soon as possible. 3. The handbrake is not released or not fully released. The handbrake should be checked promptly. 4. ABS (Anti-lock Braking System) failure. In emergency braking situations, the ABS adjusts the pressure in the brake lines based on wheel speed to keep the wheels in a state of sliding between locking and rolling, providing intermittent braking to avoid danger.
3
2
Share

How to reprogram after clearing the h6 tire pressure ID data?

h6 tire pressure ID data clearing only requires matching the computer with the tire pressure, no reprogramming is needed. Additional information about the Haval H6 is as follows: 1. Positioned as an "urban intelligent SUV", the Haval H6 was grandly launched on August 25, 2011, at the Great Wall Motors Tianjin new factory. Currently, it offers Mitsubishi 2.0L gasoline-powered models and 2.0T diesel models. 2. The Haval H6 adopts a monocoque body design, with a MacPherson strut front suspension and a double-wishbone independent rear suspension. 3. The Haval H6 will be equipped with three engines: 1.5T, 2.0 gasoline, and 2.0T diesel.
8
3
Share

What are the effects of driving in a gear that is too high?

Driving in a gear that is too high can cause abnormal engine load, increase the impact on the transmission system, and lead to higher fuel consumption. Below are the specific effects of driving in a gear that is too high: 1. Vehicles have a throttle. Driving in a gear that is too high results in a smaller throttle opening, leading to a lower engine load rate, which in turn increases fuel consumption. 2. Frequently driving in a gear that is too high subjects components such as the clutch, transmission, drive shaft, and differential to more impact, reducing their service life. Additionally, the noise produced when driving in a gear that is too high can be unbearable for passengers. 3. In emergency situations, driving in a gear that is too high results in poor acceleration performance and power response.
18
1
Share

How to use the Sorento 4WD lock button?

The usage method of the Sorento 4WD lock button is as follows: 1. Start the car and press the 4WD button on the left side of the dashboard. The yellow 4WD light on the dashboard will illuminate and remain constant when the speed is below 40KM/H. 2. When the vehicle speed reaches around 40KM/H, the 4WD computer begins to release the clamping force of the electromagnetic coupler. Additional information: The 4WD mode is suitable for use on muddy roads. Using the automatic mode on muddy roads can cause frequent and significant changes in the clamping force of the electromagnetic coupler, greatly increasing its heat generation and wear. Using the 4WD mode can effectively avoid these issues.
7
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.