What to Do When the Vios Cigarette Lighter Has No Power?

What engine does the Accord 2.0 have?

Accord 2.0 is equipped with an IVtec engine and adopts a CVT transmission. Its body dimensions are 4930mm in length, 1845mm in width, and 1470mm in height, with a wheelbase of 2775mm. The vehicle weighs 1660 kilograms, features front-wheel drive, and has a top speed of 200 kilometers per hour. The IVtec engine used in the Accord 2.0 combines Honda's Variable Valve Timing and Lift Electronic Control (VTEC) technology with the Variable Timing Control (VTC) technology that continuously adjusts the valve timing across different engine speed ranges, delivering substantial torque output and acceleration performance. Through the ECU (Electronic Control Unit), it controls the opening and closing of the intake and exhaust valves, maintaining the engine's combustion state at its optimal level, thereby achieving high power output, low fuel consumption, and clean emissions.

17

5

Share

Where are the accelerator and brake in an automatic transmission car?

In an automatic transmission car, the accelerator and brake are located below the driver's console. The brake is on the left, and the accelerator is on the right, both controlled by the right foot. Placing the accelerator and brake together assumes that the driver will only use the right foot to control either the accelerator or the brake at any given time, allowing the car to either accelerate or decelerate. The main design purposes are: 1. The accelerator is used more frequently and is positioned on the outer side of the right foot for a more comfortable posture; 2. The brake is placed on the inner side of the right foot, with the brake pedal slightly higher than the accelerator pedal to facilitate quick reaction from the driver. The correct operation method involves pivoting the right heel and using the ball of the foot to press the pedals; 3. In manual transmission cars, the driver uses both legs to control three pedals, making it impossible to press the brake and accelerator simultaneously. If accidental simultaneous pressing occurs, the vehicle's electronic system and ECU will prioritize the brake by default.

5

Share

What are the differences between the BRZ and the 86?

The differences between the BRZ and the 86 are: 1. Performance differs: the BRZ is more track-oriented; the 86 is more drift-oriented. 2. Chassis tuning and steering feel differ: the BRZ has better chassis vibration filtering; the 86 has better steering feel. The BRZ and 86 are models jointly developed by Subaru and Toyota. Toyota was responsible for the initial market positioning and setting some basic performance indicators, while the exterior and interior were designed by Toyota engineers. Subaru was responsible for the chassis and engineering development. Both the 86 and BRZ use Subaru's FA20 horizontally opposed four-cylinder engine.

18

5

Share

Is It a Violation to Make a U-Turn When the U-Turn Signal Is Red?

Making a U-turn when the U-turn signal is red is a violation. According to the "Road Traffic Safety Law," it carries a penalty of: 6 demerit points and a fine of 200 yuan. If the gap is marked with a dashed line, the U-turn is not affected by the traffic signal, nor does it require crossing the pedestrian crossing. If the gap is marked with a solid line, then the U-turn must cross the pedestrian crossing and is subject to the traffic signal. Making a direct U-turn in this case would be considered running a red light, which may result in being photographed or penalized by on-site traffic police. When making a U-turn that requires crossing the pedestrian crossing, yielding to pedestrians is necessary: If pedestrians are walking on the right side of the crosswalk and have not reached the centerline of the road, vehicles on the left side of the road should slow down and proceed only after ensuring safety. If pedestrians are waiting outside the boundary line between motorized and non-motorized lanes and have not entered the roadway, vehicles should slow down and proceed only after ensuring safety. If pedestrians cross the boundary line between motorized and non-motorized lanes, vehicles that do not stop and yield are committing a violation and should be penalized. If pedestrians enter the motorized lane (Lane A) via the crosswalk, vehicles in Lane B should slow down and proceed only after ensuring safety. Vehicles in Lane A that do not stop and yield are committing a violation and should be penalized. If pedestrians are waiting at the centerline of the road without entering the motorized lane, vehicles that do not stop and yield are committing a violation and should be penalized. If pedestrians cross the centerline of the road and enter the motorized lane, vehicles that do not stop and yield are committing a violation and should be penalized. If the road is divided by a green belt and pedestrians are waiting in the median area, vehicles must slow down and proceed only after ensuring safety. Permissible U-turn situations: If an intersection has a U-turn sign, a U-turn is allowed. If there is a U-turn signal light, follow the signal's instructions. If there is no signal light, make the U-turn based on the specific situation, ensuring it does not interfere with other vehicles or pedestrians. If an intersection does not explicitly prohibit U-turns or left turns, a U-turn is allowed. "Not explicitly prohibiting U-turns" means the intersection has no "No U-turn" or "No Left Turn" signs, and the centerline is not solid. In such cases, a U-turn is permitted. U-turns are also allowed in yellow grid zones. Yellow grid lines are no-stopping zones marked at intersections prone to congestion due to temporary parking, important entrances, or other designated areas. Stopping in these zones (including waiting for traffic lights) is a violation. However, U-turns are allowed in yellow grid zones as long as there is no central barrier, effectively making them "U-turn permitted" areas. If an intersection has a U-turn signal light, follow the signal—only proceed on green. If "No Left Turn" and "U-turn permitted" signs appear together, U-turns are allowed, but left turns are prohibited. Note that "No U-turn" is not the same as "No Left Turn." Precautions when making a U-turn at an intersection: Check the road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable U-turn location. If there is a "No Left Turn" sign, even if there is no explicit "No U-turn" sign, U-turns are not allowed at that intersection, as U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, a U-turn is not permitted at that intersection. Always yield to oncoming traffic when making a U-turn. Proceed only if it does not interfere with the normal flow of traffic; otherwise, you will bear full responsibility for any accidents. Near the stop line at intersections, lanes often have guiding arrows. The leftmost lane may not always have a left-turn arrow. If it has a straight arrow, U-turns are prohibited even if there are no explicit "No U-turn" signs.

18

3

Share

Can the sunroof of the WEY VV6 be opened?

The sunroof of the WEY VV6 can be opened, as it is a panoramic sunroof that can be opened, not a fixed glass roof. The method to open the sunroof of the WEY VV6 is as follows: press the sunroof open button, and the sunroof will automatically tilt to its maximum angle and stop; press the button again, and the sunroof will automatically open fully; press the sunroof close button, and the sunroof will automatically close. The panoramic sunroof of the WEY VV6 is relatively large, with a length of 1180 millimeters, an openable length of 330 millimeters, a width of 70 millimeters, a light-transmitting area of 0.83 square meters, and an open area of 0.23 square meters. The WEY VV6 is positioned as a 'superior intelligent safety SUV,' inheriting the DNA of the WEY brand. The vertical LED lights resemble a sword of light symbolizing justice and progress, safeguarding the vehicle and ensuring safe travel, while incorporating the inspiration of black panther biomimetic design for a visually striking impact.

17

0

Share

How to reset the maintenance light on Audi A4L?

Audi A4L maintenance light reset method: 1. Press the CAR button, enter the setup menu in MMI, and use the multifunction rotary knob to select menu items; 2. Press the CAR button to enter vehicle settings, then select Maintenance and Inspection in the settings interface; 3. Under the Maintenance and Inspection submenu, select Service Interval to enter the next submenu; 4. Enter the first interface of Service Interval, then switch to the second interface; 5. Follow the prompts to reset the service interval. The Audi A4L has a body length of 4761mm, width of 1826mm, height of 1439mm, and a wheelbase of 2869mm.

5

3

Share

What to Do When the Vios Cigarette Lighter Has No Power?

What engine does the Accord 2.0 have?

Where are the accelerator and brake in an automatic transmission car?

What are the differences between the BRZ and the 86?

Is It a Violation to Make a U-Turn When the U-Turn Signal Is Red?

Can the sunroof of the WEY VV6 be opened?

How to reset the maintenance light on Audi A4L?

Should You Use 92 or 95 Octane Gasoline for Your Car?

What does it mean when the ABS light appears on the car dashboard?

Is the Lynk & Co 03 a domestic car or a joint venture car?

Does Running the Air Conditioner While the Engine Is Off Damage the Car?