What to Do When the Vehicle Anti-Theft Lock Fails to Start?

1 Answers
VonNaomi
07/25/25 4:49am
Methods to handle when the vehicle anti-theft lock fails to start: If the engine anti-theft lock is displayed as activated and the engine cannot be started due to key mismatch, try starting with a spare key. The engine anti-theft system is designed to prevent the engine from being started without the correct key, requiring the electronic chip to match for identification. The anti-theft lock is part of the engine's security system, preventing the car from being driven away if the doors are pried open. The key for an anti-theft engine contains a chip that verifies if the engine ID matches; if not, the car automatically locks and cannot be started or driven away. If using a spare key does not work, the issue might be a malfunction in the anti-theft lock. Repairing the anti-theft lock is complex, so it's best to contact a 4S shop for inspection and repair.
Was this review help?
15
3
Share
More Forum Discussions

What is the real fuel consumption of the Nissan Sylphy Classic model?

The average fuel consumption of the Nissan Sylphy Classic version is 6.1-6.3L/100km. Below is a detailed introduction about the Nissan Sylphy: 1. Overview: The Nissan Sylphy is a mid-size sedan under Dongfeng Motor Co., Ltd. and is one of the most typical mainstream family cars in the Chinese market. On August 28, 2020, the 2021 Nissan Sylphy was officially launched by Dongfeng Nissan. The new car, based on the 14th generation Sylphy, further adds more intelligent human-machine interconnection technology, exterior accessories, and comfort configurations, with a total of 4 models launched. 2. Powertrain: The Nissan Sylphy is equipped with a 1.6L naturally aspirated engine that meets the China VI emission standards, with a maximum power of 99kW (135 horsepower) and a peak torque of 159Nm. The transmission system is paired with a CVT gearbox.
16
3
Share

Why does the water level in the radiator keep dropping even when the water temperature is not high?

Even when the water temperature is not high, natural evaporation occurs, leading to a gradual decrease in water level, which is a normal phenomenon. Below is relevant information about the radiator: 1. Concept: The car radiator, also known as the heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator where the heat is dissipated, and then returns to the water jacket to circulate, achieving temperature regulation. It is a part of the car engine. 2. Working Principle: The radiator is a crucial component of a water-cooled engine. As an important part of the heat dissipation circuit in a water-cooled engine, it absorbs heat from the engine block to prevent the engine from overheating. Due to the high specific heat capacity of water, the temperature rise after absorbing heat from the engine block is not significant, so the engine's heat is transferred through the liquid circuit of the coolant.
7
5
Share

What are the requirements for applying for an A2 driver's license?

Requirements for applying for an A2 driver's license are as follows: 1. Through additional driving license application: An A2 driver's license cannot be obtained for the first time; it can only be obtained through additional driving license application. You must hold a (B1) medium-sized passenger vehicle or (B2) large-sized truck driving license for more than three years, and have no full-point record in the two most recent scoring cycles before application; or hold an (A1) large-sized passenger vehicle driving license for more than one year, and have no full-point record in the most recent scoring cycle before application. 2. Physical requirements: Drivers aged between 24 and 50 years old must present their ID card, health certificate, and B driver's license at the vehicle management office in the area where the B driver's license was issued to apply for an additional A2 driver's license. A driver's license in normal status can be used to apply for additional driving license categories at the vehicle management office in your registered residence.
5
5
Share

How to Replace the Battery in an Old Magotan Remote?

Here is the method to replace the battery in a Magotan remote: 1. For keys before December 2016: To replace the battery in a car key before December 2016, push the lock pin of the emergency key to remove the mechanical key, then push the metal trim cover to remove it. Open the cover plate evenly along the gap, paying attention to the battery polarity (positive side outward). Use a small flathead screwdriver to remove the battery and install a new one of the same model. The installation method is the reverse of removal: install the battery, the trim cover, the metal cover, the locking mechanism, and finally the mechanical key. 2. For keys after December 2018: To replace the battery in a remote key after December 2018, push the locking mechanism of the emergency key to remove the mechanical key, then open the trim panel along the gap and gently push it outward to remove it. Use a small screwdriver to take out the battery, noting the battery polarity direction, and replace it with a battery of the same voltage. If the battery voltage is low or dead, the vehicle dashboard will display a warning: "Remote key not detected," prompting the driver to check the battery level. Reinstallation: install the battery, the trim panel, and the mechanical key to complete the battery replacement. Note: Incorrect battery replacement may damage the car key. Ensure the correct polarity and choose a new battery of the same size and specifications during installation.
16
0
Share

What does it mean when the car ignition warning light comes on?

Detailed explanation of why the car ignition warning light illuminates is as follows: 1. Insufficient engine oil level: Results in inadequate or no lubrication in the system. 2. Dirty or thickened oil: Prevents the oil pump from effectively drawing in and circulating oil, leading to low or no oil pressure. 3. Overly thin oil or high engine temperature: Causes oil to thin out and leak through gaps in the engine's friction areas. 4. Oil pipe leakage: Damage to the oil pump or excessive wear of its components reduces or completely stops oil intake and circulation. Excessive clearance between the crankshaft and bearings leads to oil leakage, resulting in low oil pressure.
7
0
Share

Why is the V260 more expensive than the Vito?

V260 is more expensive than Vito for the following reasons: 1. The V260 features a solid large emblem, full LED headlights, and additionally includes LED taillights and rear radar, which the Vito lacks. 2. The Vito comes with standard 17-inch wheels, whereas the V260 is equipped with 18-inch wheels, giving it a more premium appearance. 3. Compared to the Vito's sharp and angular exterior design, the V260 boasts a chrome-plated front grille and softer, slightly rounded front-end lines, enhancing its visual appeal as a high-end MPV. Below is more information about the V260: 1. The Mercedes-Benz V260 business van is powered by a high-performance version of the M274 2.0T turbocharged engine (211 horsepower, 350 N·m), which delivers peak torque at just 1200 rpm, minimizing turbo lag, with a combined fuel consumption of only 8.5L/100km. 2. In terms of power and handling, the Mercedes-Benz V250 is equipped with the M274 2.0T turbocharged engine, with a maximum power output of 155KW (211ps). Its power tuning is identical to that of the GLC, and this gasoline engine is unique to the domestic models.
7
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.