What to Do When the Urea Tank Cap Keeps Turning but Won't Open?

How to Adjust the Rearview Mirror of Jetour X70?

Jetour X70 has a body length, width, and height of 4720mm, 1900mm, and 1695mm respectively, with a wheelbase of 2745mm. The vehicle adopts a front-engine, front-wheel-drive layout. The adjustment methods for the rearview mirrors of Jetour X70 are as follows: 1. When adjusting the left rearview mirror, handle the up and down positions by placing the distant horizon in the center, then adjust the left and right positions until the car body occupies one-fourth of the mirror's surface; 2. When adjusting the right rearview mirror, position the horizon at two-thirds of the mirror's height, then adjust the car body's edge to occupy one-fourth of the mirror's image; 3. When adjusting the interior rearview mirror, ensure that the rear window is fully visible through the mirror.

2

4

Share

What is zedriv?

Guojizhijun Auto. Below are the specific details: 1. Introduction: Guojizhijun Auto Co., Ltd., referred to as Guojizhijun, was established in 2017. It was formed by Guojizhijun Auto in collaboration with several leading companies within and outside the industry, aiming to build a global full-value-chain innovative enterprise covering new energy vehicle R&D, manufacturing, sales, and services. 2. Business Scope: Technical R&D, manufacturing, processing, sales, and technical consultation and services for new energy vehicles, auto parts, and power battery systems; vehicle charging services, construction and operation of new energy vehicle charging facilities, and remote monitoring equipment for vehicles and new energy vehicles; economic trade consultation (excluding finance, securities, futures, insurance, and other areas with special national regulations); sales of auto accessories; import and export of various goods and technologies, and consultation services for import and export business, etc.

19

1

Share

How to Replace the Fuel Filter on a Bora?

Prepare two flat-head screwdrivers and an oil container. First, use one screwdriver to press against the fuel pipe clip, and insert the other between the fuel filter and the clip. Twist to loosen one end, then remove the fuel filter. Use your thumb and index finger to press the other clip and pull it out. When installing the new fuel filter, be sure to apply some engine oil inside the clip and at the fuel filter connection point, then insert it while rotating. Related information is as follows: 1. The replacement interval for the Volkswagen Bora fuel filter is generally the same for all vehicles, approximately every 30,000 to 40,000 kilometers. Additionally, if you notice poor fuel flow, replacing the fuel filter can help. 2. Generally, turbocharged models require replacement every 20,000 kilometers, while naturally aspirated models need replacement around 30,000 kilometers. If the vehicle is driven in areas with heavy dust, the replacement interval should be appropriately shortened.

10

5

Share

How often should the air conditioning filter of the Volkswagen Lavida be replaced?

The air conditioning filter is generally replaced every 10,000 to 20,000 kilometers or every 1 to 2 years. Functions of the air conditioning filter: It ensures the filter fits tightly against the housing, preventing unfiltered air from entering the cabin. It separates solid impurities such as dust, pollen, and grinding particles from the air. It adsorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and long-lasting moisture adsorption capabilities. It prevents car windows from fogging up, ensuring clear visibility for drivers and passengers and enhancing driving safety. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. It also effectively sterilizes and deodorizes. Precautions for replacing the air conditioning filter: Purchase air conditioning filters produced by reputable manufacturers. Always turn off the car engine before replacing the air conditioning filter. Pay attention to the installation direction of the filter during installation to avoid installing it backward.

1

3

Share

Why does the car steering wheel feel a bit tight when turning?

Steering wheel stiffness may be caused by insufficient tire pressure, issues with hydraulic power steering, or problems with electric power steering. Below is an analysis of the reasons for a tight steering wheel: 1. Insufficient tire pressure: Low tire pressure can make the driver feel the steering wheel significantly heavier and tighter. Simply inflating the tires to the standard pressure will restore normal operation. 2. Hydraulic power steering issues: For hydraulic systems, a common cause is dirty power steering fluid. This situation is similar to how dirty engine oil affects engine power and performance. Dirty power steering fluid can lead to increasingly heavy steering, and low fluid levels can also cause the steering wheel to feel heavier. If the issue is related to power steering fluid, it should be promptly refilled or replaced. 3. Electric power steering issues: For electric systems, check if any fuses are blown or if there are short circuits or ground faults in the wiring. Repeatedly turning the steering wheel while stationary or at low speeds places a heavy load on the power system, which can cause the steering gear to overheat and become saturated, resulting in heavy steering. This is a normal phenomenon, and the steering will return to normal after cooling down.

20

4

Share

What are the reasons for not being able to shift gears when the clutch is fully depressed in a manual transmission?

Here are the reasons why a manual transmission car cannot shift gears when the clutch is fully depressed: 1. Clutch cable failure: Some manual transmission cars still use cables to control the clutch. The outer sheath of the cable can easily crack, leading to difficulty in shifting gears due to no clutch engagement. The solution is to directly replace the cable. 2. Excessive gear self-locking force on the clutch side: This can cause difficulty in engaging and disengaging gears. It is recommended to go to a repair shop to adjust the clutch cable and gear stop lock. 3. Clutch master cylinder failure: The clutch hydraulic master cylinder may experience pressure loss or oil leakage during use, resulting in the inability to shift gears when depressing the clutch. In this case, the clutch master cylinder needs to be replaced at a service station, followed by an air bleeding operation. 4. Transmission failure: Issues such as insufficient transmission fluid, stuck transmission shift mechanism, or failure of a specific gear or shift fork can all lead to difficulty in shifting gears or the inability to engage a gear. For transmission-related problems, a detailed inspection at a professional repair shop is necessary.

20

4

Share

What to Do When the Urea Tank Cap Keeps Turning but Won't Open?

How to Adjust the Rearview Mirror of Jetour X70?

What is zedriv?

How to Replace the Fuel Filter on a Bora?

How often should the air conditioning filter of the Volkswagen Lavida be replaced?

Why does the car steering wheel feel a bit tight when turning?

What are the reasons for not being able to shift gears when the clutch is fully depressed in a manual transmission?

What does it mean when the SPORT light on the car is on?

What are the tire specifications for the 8th-generation Civic?

What is the model of the front low beam light for the Baojun 730?

What kind of engine oil should be used for Nissan cars?