What to Do When the Trunk of Trumpchi GS8 Won't Open?

Can the Wuling Hongguang Mini be driven in snowy weather?

According to officially released data, the Bao Lai comes with two engine displacements: 1.4T and 1.5T. The 1.4T model accelerates from 0-100 km/h in 8.3 seconds, while the 1.5T model takes 13.7 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in layman's terms, represents how much force is available. The greater the torque, the stronger the force pushing the vehicle, leading to naturally faster acceleration. The Bao Lai 1.4T model has a maximum torque of 250 Nm and accelerates from 0-100 km/h in 8.3 seconds. The Bao Lai 1.5T model has a maximum torque of 145 Nm and accelerates from 0-100 km/h in 13.7 seconds. The Xing Rui 2.0T has a torque of 300 Nm and accelerates from 0-100 km/h in 7.9 seconds. Transmission efficiency: The transmission serves as the medium for power delivery and inevitably involves power loss. The higher the transmission efficiency, the better the acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission (DCT) > wet dual-clutch transmission > automatic transmission (AT) > continuously variable transmission (CVT). The Bao Lai 1.4T model is equipped with a dry dual-clutch transmission (DCT), while the Bao Lai 1.5T model uses a manual-automatic transmission (AT). Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). The higher the power-to-weight ratio, the faster the acceleration. The Xing Rui has a power-to-weight ratio of 127 Hp/T and accelerates from 0-100 km/h in 7.9 seconds. The Bao Lai 1.4T has a power-to-weight ratio of 114 Hp/T and accelerates in 8.3 seconds, while the Bao Lai 1.5T has a ratio of 88 Hp/T and takes 13.7 seconds.

15

2

Share

What is the engine model of the Fista?

The 1.4T version of the Fista uses the G4LD engine model, with a maximum power of 103kW and a maximum torque of 240Nm. The 1.6T version is equipped with the G4FJ engine, delivering a maximum output power of 150kW and a maximum torque of 265Nm. The Fista engine is a domestically produced engine manufactured by Beijing Hyundai. For daily maintenance of the Fista engine, the following methods can be applied: Use lubricating oil of appropriate quality grade. For gasoline engines, select SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the engine oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, leading to various engine issues. To avoid malfunctions, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter becomes clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, bypassing through the relief valve and bringing contaminants back to the lubrication areas, accelerating engine wear and increasing internal pollution. Periodically clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to flush the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

6

4

Share

What is automotive OBD?

Automotive OBD is the On-Board Diagnostics system, which continuously monitors the engine's operating conditions to check if the vehicle's emissions exceed standards and will issue an immediate warning if they do. When a system malfunction occurs, the malfunction indicator lamp or check engine warning light will illuminate, while the powertrain control module stores the fault information in memory. Through specific procedures, the fault codes can be read from the PCM. Based on the fault code prompts, maintenance personnel can accurately determine the nature and location of the fault. The OBD interface in vehicles is generally located in the interior trim panel below the steering wheel, near the driver's knee area.

8

4

Share

What are the reasons for the engine fault warning light to illuminate?

The reasons for the engine fault warning light to illuminate are: 1. Poor combustion state; 2. Poor fuel quality; 3. Dirty engine cylinder interior with carbon deposits. The engine fault signal on the car dashboard is issued by the ECU (Engine Control Unit), which controls all electronic devices of the entire engine, such as the electronic throttle, fuel injectors, alternator, fuel pump, etc., covering various systems including intake, exhaust, fuel, ignition, and timing. When the engine fault light comes on, the owner should start and turn off the vehicle three times in a row, or disconnect the negative terminal of the engine battery, wait for 30 seconds, and then reconnect it.

16

2

Share

How to use the car's cruise control?

The method to use the car's cruise control is: First, ensure the vehicle speed is above 40 km/h, then press the on/off button (the middle button). Note that simply activating this function doesn't engage cruise control; you must also press the top button among the three buttons to officially enable the cruise control feature. The cruise control system can only reduce speed by decreasing throttle input, not by applying brakes. Once cruise control is activated, the vehicle will maintain the speed set by the driver automatically without needing to press the accelerator pedal, allowing the car to travel at a constant speed.

7

2

Share

Where is the cabin air filter located in the Haval F5?

Haval F5's cabin air filter is located inside the glove compartment on the passenger side. To replace the cabin air filter, you must first remove the glove compartment. The specific steps are as follows: 1. Open the glove compartment and remove all items inside; 2. There are screws on the sides of the glove compartment—remove all of them; 3. There is a knob on each side of the glove compartment—twist them to remove and then take out the glove compartment; 4. At this point, you will see the cabin air filter cover; 5. Open the cover to access the cabin air filter; 6. Pull out the old filter and replace it with a new one.

3

Share

What to Do When the Trunk of Trumpchi GS8 Won't Open?

Can the Wuling Hongguang Mini be driven in snowy weather?

What is the engine model of the Fista?

What is automotive OBD?

What are the reasons for the engine fault warning light to illuminate?

How to use the car's cruise control?

Where is the cabin air filter located in the Haval F5?

What does 'all-inclusive driving license' mean? What does it include?

What are the differences between front-engine and rear-engine four-wheel drive vehicles?

Where to Get the Physical Examination Items for Driver's License Annual Review?

Is it mandatory to conduct driver's license review at the issuing location?