What to Do When the Transmission Has Problems?

Why Does Fog Form on Car Windows in Summer?

After turning on the air conditioning in the car during summer, the outside temperature becomes lower than the inside temperature, causing the water vapor inside the car to form numerous tiny water droplets. The surface of the front windshield is not perfectly smooth and has many small pits, which allows these tiny water droplets to adhere to the windshield, forming fog on the glass. Here are some methods to prevent frost formation on car glass: 1. Use a cover to shield the windshield: You can use an object to cover the front windshield, preventing the wipers from freezing to it. 2. Lower the interior temperature after parking: In winter, the heater is usually turned on while driving. After parking, open the car doors and windows to allow the interior temperature to drop.

9

0

Share

What does the vehicle EPC mean?

EPC is the fault indicator light for the vehicle's mechanical and electronic control system. When the car displays EPC, it means there is a malfunction in the engine's power control management system, requiring troubleshooting and repair. The following are specific reasons for the appearance of EPC: 1. Intake system issues: Faults, leaks, or blockages in the intake system. 2. Throttle problems: Dirty throttle body, excessive carbon buildup, etc., causing the EPC fault light to illuminate. 3. Poor fuel quality: Substandard or poor-quality fuel. 4. Cylinder pressure issues: Abnormal cylinder pressure, poor operating conditions.

2

0

Share

Why is the Golf's rearview mirror heating not working?

The reasons why the Golf's rearview mirror heating is not working are as follows: 1. High outdoor temperature: The Golf's rearview mirror heating is set to work only when the ambient temperature is below 20 degrees Celsius. Therefore, if the rearview mirror heating is not working, the first consideration should be whether the outdoor temperature is too high. 2. Loose heating wire connections: This can be divided into loose external plugs and internal looseness. The repair locations to check are the triangular panel areas on both sides of the doors and the area below the left side of the driver's seat. Below is some related information about rearview mirror heating: 1. Principle: An electric heating element or film is installed inside the rearview mirror lenses on both sides. There is usually a rearview mirror heating button on the car's center console. When the button is pressed, it heats up quickly, and the effect can be seen soon. Of course, the heating temperature has a range, generally between 30 to 60 degrees Celsius. 2. Function: The car's rearview mirror heating is particularly useful during rainy or snowy weather. When the rearview mirror heating is activated, the heater behind the mirror quickly heats the mirror surface, removing rainwater or fog from the mirror. This eliminates the need for the driver to frequently wipe the mirror manually, thereby reducing driving hazards.

15

0

Share

What is the displacement of the BMW N55 engine?

The displacement of the BMW N55 engine is 3.0 liters. Below is a detailed introduction to engine displacement: 1. Displacement is an important indicator for evaluating engine performance. The volume of fluid inhaled or expelled by the engine per stroke or cycle is the engine's intake volume. The working volume swept by the piston moving from top dead center to bottom dead center is called the cylinder displacement. If the engine has multiple cylinders, the sum of the working volumes of all cylinders is referred to as the engine displacement. It is generally expressed in liters (L) or cubic centimeters (cc). 2. The concept of horsepower as a unit was named by James Watt, the improver of the steam engine, to represent the power of his steam engine relative to the pulling force of horses. It is defined as the power of a horse capable of pulling 33,000 pounds at a speed of one foot per minute, with the standard units being watts (W) or kilowatts (kW). That is: 1 metric horsepower = 75 kgf·m/s = 735 watts. For a 1.6L displacement engine, depending on the brand and tuning method, a naturally aspirated engine typically ranges between 100 to 120 horsepower. With turbocharging technology, it can reach up to around 130 horsepower.

9

5

Share

Do I Need to Replace Cracked Tires?

Whether to replace cracked car tires depends on the situation. If the cracks are caused by external impact or scratches, immediate replacement is necessary. There are two scenarios for tire cracks: 1. Natural aging of tire rubber: Natural aging of tire rubber usually occurs after prolonged use, where many fine cracks appear on the tire surface, known as "crazing." Since tire rubber requires a certain level of hardness, a manufacturing process called vulcanization is used. Vulcanized rubber increases hardness but will age over time. Therefore, tires generally have a lifespan of about 3 years. If crazing appears, continuing to use the tire without replacement may lead to the risk of a blowout, compromising vehicle safety. Thus, it is recommended to replace the tire as soon as possible. 2. External impact or scratches on the tire: Cracks caused by external impact usually appear on the tire sidewall. The tread, which contacts the road, is less likely to suffer such impacts. However, the sidewall is more vulnerable, such as when rubbing against curbs while parking or scraping against pothole walls, leading to cracks. Such cracks necessitate tire replacement because the sidewall is the weakest part of the tire. Cracks indicate structural damage, and while driving, friction between the tire and the road generates heat, causing the internal gas to expand, significantly increasing the risk of a blowout. This affects vehicle safety, so replacing the tire is advised.

16

4

Share

How to Open the Oil Cap?

For most vehicles, the oil cap can be opened by turning it 90 or 180 degrees clockwise or counterclockwise. Here is some related information about the oil cap: 1. Gasoline cap is too tight to open due to good sealing: If the car's oil cap is too tight to open, it is likely due to excessive suction. It's important to note that after the engine starts, it operates under a negative pressure state, creating a suction effect. If you don't have enough strength, you might not be able to unscrew it, especially for new cars where the gasoline cap's good sealing makes the negative pressure effect more pronounced. In such cases, simply wait until the car cools down, and the oil cap can be opened easily. 2. Unable to open due to negative pressure and over-tightening: To access the engine oil filler port, you need to open the engine hood. Sometimes, the car's oil cap cannot be opened due to negative pressure and over-tightening, but you can use pliers or go to a repair shop to use specialized tools to open it. Adding engine oil requires opening the engine hood.

2

1

Share

What to Do When the Transmission Has Problems?

Why Does Fog Form on Car Windows in Summer?

What does the vehicle EPC mean?

Why is the Golf's rearview mirror heating not working?

What is the displacement of the BMW N55 engine?

Do I Need to Replace Cracked Tires?

How to Open the Oil Cap?

Can the Vehicle Purchase Tax Certificate Be Reissued If Lost?

What does the 'door' in a car mean in Chinese?

Is the Dash Cam Always On?

What is a Child Safety Seat?