What to Do When the Traction Control Light Comes On?

1 Answers
MacTravis
07/30/25 4:01am
The illumination of the traction control light indicates a potential fault in the traction control system. While the vehicle can still be driven, it may experience front-wheel skidding during acceleration for front-wheel-drive cars or tail sliding for rear-wheel-drive cars on slippery surfaces without TCS. Therefore, it is advisable to seek a repair shop as soon as possible to address the issue and avoid safety hazards or unnecessary losses. Below is more information about traction control: 1. Introduction: The traction control system can regulate the torque output of the engine, preventing drive wheel spin on slippery surfaces like snow and ensuring smooth vehicle starts and acceleration, especially on snowy or muddy roads. 2. Function: The traction control system ensures smooth acceleration performance and prevents the vehicle from skidding sideways or tail sliding due to drive wheel spin, making it a crucial feature for driving safety.
Was this review help?
5
0
Share
More Forum Discussions

How to Maintain a Mazda?

The amount of antifreeze must be appropriate. The service station recommends replacing the antifreeze every two years, but mixed antifreeze must be replaced annually. Engine oil requires higher lubrication standards in winter. If summer-grade oil is being used, it must be replaced, and any oil that has been in use for an extended period should also be changed. If you normally use 90-octane gasoline, you can switch to 93-octane. Since winter driving environments have lower temperatures, higher-octane gasoline has a higher ignition point.
6
1
Share

How to Choose Between the Classic Sylphy and Skoda Octavia?

The official price of the top-end Sylphy is slightly cheaper than that of the top-end Octavia. The body of the top-end Sylphy is shorter than that of the top-end Octavia, and the wheelbase of the top-end Sylphy is also shorter than that of the top-end Octavia. The top-end Octavia is more feature-rich compared to the top-end Sylphy. The top-end Octavia is more powerful than the top-end Sylphy.
11
1
Share

How to Set Up Automatic Door Lock for Classic Focus?

First, turn on the key to put the car in the ON position, but do not start the engine. Then, press and hold the lock button for about 10 seconds. You will hear a beep sound inside the car or see the lights flash twice, indicating that the automatic door lock function has been successfully set up. The purpose of this function is anti-theft. It ensures that the doors lock quickly after driving, preventing potential door-pulling robberies during traffic jams or at red lights, thereby providing a certain level of security.
15
2
Share

How to Solve the Issue of Nissan Sylphy Classic Consuming 10L/100km?

Fuel consumption increase is closely related to tires. Generally, the larger the contact area between the tires and the ground, the stronger the grip. The main function of the oxygen sensor is to monitor the oxygen concentration in the exhaust. The vehicle's computer will adjust the fuel injection amount in real-time based on the data it provides. Carbon deposits inside the engine can cause unstable idling and reduced machine efficiency, leading to increased fuel consumption. Poor driving habits are also a reason for increased fuel consumption, such as sudden acceleration, sudden braking, and abrupt stops.
13
1
Share

Why does the car's high beam not seem bright enough?

Here are the reasons why the car's high beam may not be bright enough and the corresponding solutions: 1. Circuit malfunction: This issue may be caused by poor or loose wiring connections, or connectors not being properly seated; it requires inspection and repair at a 4S shop. 2. Bulb wattage issue: Using bulbs with inconsistent wattage during replacement may lead to this problem; simply replace them with bulbs of slightly higher appropriate wattage. 3. Reflector deformation or looseness: Deformation, looseness, detachment of the reflector inside the headlight, or quality issues causing poor light concentration or dispersion may also result in insufficient brightness or lack of focus; this requires inspection and repair at a 4S shop.
4
2
Share

At what water level will the transmission get flooded?

Water exceeding two-thirds of the wheel height or splashing waves during oncoming traffic can cause transmission flooding. Water exceeding two-thirds of the wheel height: When water surpasses two-thirds of the wheel height, there's an 80% to 90% chance of transmission flooding. If water reaches the dashboard level, the transmission is 100% flooded. Splashing waves during oncoming traffic: Excessive road water can create splashes that flood the transmission upon hitting the vehicle body. Effects of transmission flooding: Flooding severely compromises transmission fluid performance, impairing both lubrication and power transfer capabilities. This leads to clutch slippage, elevated oil temperatures, potential steam generation, and even boiling of the fluid-water mixture. These viscous substances may accumulate in the valve body, causing blockages that affect the transmission control system.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.