What to Do When the Toyota Vios Ignition Coil Fails to Spark?

1 Answers
VonLucia
07/24/25 8:22pm
Toyota Vios ignition coil failure solutions are: 1. Refuel the vehicle; 2. Call for roadside assistance or jump-start the car, then promptly proceed with repairs after starting; 3. Ensure proper gear selection by placing the transmission in P (Park) or N (Neutral) position; 4. If steering wheel is locked, gently rock it while turning the ignition key; 5. Clean clogged areas of the fuel filter. The Toyota Vios is equipped with a 1.5L L4 naturally aspirated engine delivering 110 horsepower and 138 Nm of torque, paired with a 5-speed manual transmission. Vehicle dimensions measure 4435mm in length, 1700mm in width, 1490mm in height, with a 2550mm wheelbase, achieving a top speed of 190 km/h.
Was this review help?
1
4
Share
More Forum Discussions

What is the tutorial for replacing the air conditioning filter in the Octavia?

The tutorial for replacing the air conditioning filter in the Octavia: First, remove the glove box. After removing the glove box, you can see the cover of the air conditioning filter. There are 3 clips on the top of the cover, press them downward to remove it. At this point, you can see the air conditioning filter. Remove the old filter and replace it with a new one. When installing, pay attention to the arrow indication and do not install it backwards. The Octavia is a car launched by SAIC Skoda, featuring the brand's new design language, showcasing a simple, fashionable, and elegant styling. The details are enhanced with exquisite touches. The newly added light-guided LED daytime running lights make the car look more luxurious and full of technology. The dual-color floating exterior rearview mirrors enrich the sense of layering of the car body. The stylish black shark fin antenna has a unique design, small size, and is fashionable, dynamic, and can effectively optimize wind resistance, combining aesthetics with practicality.
15
5
Share

Will I Get Penalized for Making a U-Turn at a Red Light?

Making a U-turn at a red light will result in penalties at locations with no U-turn or no left-turn signs/markings, but no penalties will be incurred at locations without such prohibitions. However, the maneuver must not obstruct the normal passage of other vehicles and pedestrians. Additional details are as follows: According to the 'Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China': Article 49 Motor vehicles are prohibited from making U-turns at locations with no U-turn or no left-turn signs/markings, as well as at railway crossings, pedestrian crosswalks, bridges, sharp curves, steep slopes, tunnels, or other hazardous road sections. Motor vehicles may make U-turns at locations without such prohibitions, provided they do not hinder the normal passage of other vehicles and pedestrians. According to the 'Road Traffic Safety Law of the People's Republic of China': Article 26 Traffic signals consist of red, green, and yellow lights. A red light indicates prohibition of passage, a green light permits passage, and a yellow light serves as a warning.
4
5
Share

What materials are needed to apply for a driving school?

You only need to present your ID card to register in any region across the country. Currently, a temporary residence permit is no longer required for applying for a driver's license; only an ID card is sufficient. Below is relevant information about driver's licenses: 1. License categories: The motor vehicle driver's license is classified into a hierarchical system, dividing licenses into 15 categories: A1, A2, A3, B1, B2, C1, C2, C3, C4, D, E, F, M, N, and P. 2. Points and review: The cumulative points cycle for road traffic safety violations (i.e., the points cycle) is 12 months, with a maximum of 12 points, calculated from the date the motor vehicle driver's license is first issued. Based on the severity of road traffic safety violations, the points for a single violation are categorized into five types: 12 points, 6 points, 3 points, 2 points, and 1 point.
16
2
Share

What Causes Rapid Consumption of Windshield Washer Fluid in Cars?

There may be four reasons for the rapid consumption of water in the car's reservoir: Poorly designed cooling system: This is generally not an issue with mature car models, especially new cars without such faults, so this can be disregarded. Leakage: Usually, leakage points leave very obvious traces. Poor circulation leading to rapid consumption: It's advisable to have a professional mechanic check this. Note that when adding antifreeze, it should be done after the engine has cooled down. Antifreeze entering the cylinder and being burned: If antifreeze enters the cylinder and is burned or seeps into the oil pan, in mild cases, there will be no water in the oil pan, but the engine may not perform well. In more severe cases, water may be present in the oil pan, causing unstable engine operation. Do not immediately assume the issue is with the cylinder head gasket—a damaged intake manifold gasket can also cause coolant to enter the cylinder, as some engines have water passages in the intake manifold.
17
5
Share

How to Determine if a Vehicle Has Been Flooded

Methods to determine if a vehicle has been flooded are as follows: 1. Check the engine oil: The simplest method is to inspect the color of the engine oil for abnormalities. If the oil turns milky white, it indicates water has entered the fuel tank or engine. 2. Inspect various pipelines for water ingress: Examine the air filter and the lower housing of the air filter for obvious signs of water ingress, and check the intake pipe and intake manifold for clear traces of water. 3. Check the spark plugs: Remove the spark plugs from each cylinder and inspect if they are damp. If they are, it suggests signs of water in the engine. 4. Examine the engine cylinder walls for carbon deposits: During normal engine operation, the position where each piston reaches top dead center is the same, and the top dead center position on the cylinder wall is clear. When water enters the engine, since water is difficult to compress, the piston cannot reach its original top dead center position, resulting in a shorter piston stroke and a noticeable downward shift in the top dead center position.
7
1
Share

Will You Lose Points for Braking Too Hard in Subject Three?

You will lose points. More information about Subject Three is as follows: Overview: Subject Three, including the road driving skills test and the safety and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safety and civilized driving knowledge test subjects in the motor vehicle driver's test. The content of the road driving skills test varies for different types of vehicles. Test Content: The road driving skills test for Subject Three generally includes preparation before getting on the car, simulated light test, starting, driving straight, changing lanes, parking by the roadside, going straight through intersections, turning left at intersections, turning right at intersections, passing pedestrian crossings, passing school zones, passing bus stops, meeting vehicles, etc. Deduction Criteria: Failing to fasten seat belts or wear helmets as required, being unable to correctly use vehicle operation components such as lights or wipers, or having a distance of more than 750px behind the vehicle when starting will directly result in a deduction of 100 points.
15
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.