···
Log in / Register

What to Do When the Tire Pressure Monitoring Light Comes On in Lavida?

3 Answers
VanStephanie
08/31/25 2:04am
When the tire pressure monitoring light comes on in a Lavida, you should immediately stop to check the condition of the tires and identify the cause. The reasons for the tire pressure monitoring light coming on in a Lavida are as follows: 1. Puncture causing the tire pressure monitoring light to come on. This situation usually involves a very slow leak. Use a tire pressure gauge to measure the pressure—2.3 bar for the front tires and 2.5 bar for the rear tires. Inflate if low, then observe the tire pressure warning light. If it comes on again after a few days, remove the tire for inspection. 2. Sometimes the tire pressure monitoring light comes on due to overinflation. According to the international GBT2978-2008 standard, the recommended pressure for standard tires is 2.4-2.5 bar; reinforced tires: 2.8-2.9 bar; maximum pressure should not exceed 3.5 bar. Therefore, if any tire exceeds 3.0 bar, it may trigger the tire pressure monitoring light. 3. Prolonged driving with low tire pressure can cause the light to come on. If a tire's pressure is too low, high-speed driving increases tire temperature, leading to higher pressure. In this case, stop to rest or replace the tire with a spare. 4. Long-term underinflation can cause the tire pressure monitoring light to come on. When the pressure drops below 1.8 bar, the light will activate. In this situation, inflate the tires promptly.
Was this review help?
11
2
Share
BennettDella
09/12/25 5:37am
The tire pressure monitoring light on my Lavida came on, so I immediately found a safe place to pull over. Continuing to drive is not advisable because abnormal tire pressure increases the risk of a blowout or affects vehicle handling. After getting out of the car, I carefully inspected each tire for visible leaks or signs of punctures, like nails. Then, I used a tire pressure gauge to check the actual pressure of each tire, aiming for a target range of 2.2 to 2.5 bar, as indicated on the label on the door frame. If the pressure was low, I used the onboard air pump or visited a nearby repair shop to inflate the tires. Afterward, I started the car and located the tire pressure reset button on the dashboard—usually a small button near the instrument panel—holding it down for a few seconds until the indicator light turned off. I make it a habit to check tire pressure monthly, especially during seasonal transitions when temperature fluctuations can cause pressure variations. If the light goes off but comes back on after driving a short distance, it might indicate a genuine puncture or a sensor malfunction, in which case I take the car to a professional shop for inspection without delay. Following this simple routine ensures safety and has helped me avoid many issues during daily driving.
Was this review help?
18
3
Share
Expand All
McCorbin
10/26/25 6:26am
The tire pressure warning light is quite common on the Lavida. As a car enthusiast like me, I always prefer to handle it myself. First, make sure the car is parked and stable, don't panic, take out your phone to check the standard tire pressure values or refer to the vehicle's user manual for the location. The visual inspection of the tires is simple—just squat down and feel for any obvious deflation, then use a portable tire pressure gauge to measure each wheel. If the pressure is low, use a portable inflator connected to the cigarette lighter to refill the tires. After refilling, remember to find the tire pressure reset switch in the car, usually located under the steering wheel or near the dashboard, and hold it for a few seconds. If the light is still on, there might be an issue with an individual tire sensor or the tire might be aging and leaking, in which case you'll need to visit a 4S shop for a detailed check. I recommend checking the tire condition regularly during seasonal changes and learning some basic car maintenance knowledge—it saves money and hassle. Real-time monitoring while driving is also crucial.
Was this review help?
14
3
Share
Expand All
More Forum Discussions

What is the displacement of 1200cc?

1200cc is equivalent to a 1.2L displacement. Engine displacement is the total working volume of all cylinders in an engine, calculated by multiplying the swept volume (the volume displaced by the piston moving from top dead center to bottom dead center) by the number of cylinders. Displacement is a crucial structural parameter that comprehensively measures the size of an engine, and the performance indicators of an engine are closely related to its displacement. Generally, a larger displacement means the engine releases more energy per unit time (converting chemical energy from fuel into mechanical energy), resulting in better "power performance." Conversely, a smaller displacement means the engine releases less energy per unit time, which can lead to insufficient power. Displacement is measured by steady-speed fuel consumption, which refers to the fuel economy of a car driving at a constant speed on a good road. Since steady-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely used. For example, France and Germany use the steady-speed fuel consumption at 90Km/h and 120Km/h as the main evaluation indicators for fuel economy. China also adopts this indicator. The fuel consumption per 100 kilometers stated in the manuals of domestic cars is generally steady-speed fuel consumption. However, since cars often experience acceleration, deceleration, braking, and engine idling in actual driving conditions, steady-speed fuel consumption is often lower than the actual fuel consumption, resulting in a significant discrepancy. This discrepancy is even greater for cars frequently used for short-distance driving in urban areas.
8
4
Share

Can 12123 Check Traffic Violations?

12123 is accurate for checking traffic violations. The relevant extended content of 12123 is as follows: 12123 Service Items: After the launch of the 12123 platform, users can register with real names and open accounts to enjoy more than 130 services in 10 categories provided by the Internet-based comprehensive traffic safety service management platform, including driving test and vehicle inspection appointments, license and certificate processing, violation handling and fine payment, travel information, information inquiry, notification and reminders, information disclosure, key object management, traffic safety publicity, and business consultation. 12123 Optimized Features: The traffic violation self-service handling function of the 12123 platform has been optimized and improved, including expanding the range of non-personal vehicles that can be registered and optimizing the registration process.
10
5
Share

What is the difference between license plate replacement and reissuance on 12123?

Here are the differences between license plate replacement and reissuance on 12123: Different license plate numbers: Reissuance means obtaining the same license plate number without any changes. Replacement means getting a new license plate number that differs from the original one. Registration: Reissuance is chosen when the license plate is lost, and registration is required. Replacement is selected when the license plate is damaged, and while no registration is needed, the old plate must be surrendered. In both cases, once the application is submitted, the process is considered completed and cannot be canceled. Failure to comply will result in being blacklisted, suspending online vehicle and driver's license services.
13
3
Share

What does c100002 mean when it appears on 12123?

12123 displaying c100002 may indicate a local data center issue, which is a server problem, or it could be caused by too many users logging in simultaneously, leading to service abnormalities. Here is an extended explanation: Check if there is an issue with the phone itself: First, verify the phone's network status and try logging into other applications to see if they work properly; if the phone's memory is overloaded and its performance is restricted, clear the phone's cache. Check if there is an issue with the software: Log out and then re-register or log in again, or wait for more than 10 minutes before trying again; try logging in with another phone to see if others around you can log in or register successfully.
4
1
Share

How long does it take to get a replacement license plate through 12123?

It usually takes about 5-7 days to receive a replacement license plate through 12123. Generally, the processing time for a replacement license plate through 12123 is 1-3 working days for acceptance, and completion within 3-5 days. Receiving the license plate usually takes about 5-7 days, with a maximum of 15 days. Additionally, the following documents are required for a replacement license plate: Fill out the "Application Form for Replacement or Renewal of Motor Vehicle License Plates and Certificates"; Identity proof of the vehicle owner or agent; for corporate vehicles, the business license must be presented and stamped; Motor vehicle driving license and vehicle registration certificate; For stolen vehicles, a theft report issued by the police station is required; According to Article 44 of the "Regulations on the Registration of Motor Vehicles" (Ministry of Public Security Order No. 124): If the motor vehicle license plate or driving license is lost, missing, or damaged, the vehicle owner must apply for a replacement or renewal at the local vehicle management office. The vehicle management office will review the submitted proofs and documents, retrieve any undamaged or lost license plates, and issue a replacement within 15 days from the date of acceptance, keeping the original license plate number unchanged. For vehicles unable to operate during the license plate production period after applying for a replacement or renewal, the vehicle management office will issue a temporary driving license plate valid for no more than 15 days.
2
2
Share

Why Did Toyota Land Cruiser Change Its Name to Land Cruiser?

Previously known as the Land Cruiser, the name change was also due to advertising issues. Below is an introduction to the Toyota Land Cruiser: 1. Engine: The 2019 Toyota Land Cruiser 4000 is equipped with a 4.0L V6 engine, delivering a maximum horsepower of 275 HP, maximum power of 202 KW, and peak torque of 394 NM. 2. Exterior: The front face exudes a rugged and bold image, with distinctive headlights that appear robust. 3. Interior: The comfortable interior showcases another side of the Toyota Land Cruiser 4000, featuring a simple and clean layout that is immediately appealing.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.