What to Do When the Tire Pressure Monitoring Indicator Light Comes On?

2 Answers
Aubree
07/29/25 5:32pm
Tire pressure monitoring indicator light comes on the processing method: stay calm and do not panic, immediately reduce the speed and avoid fast steering and sudden braking, immediately check the tires, because most cases of tire leakage are caused by nails puncturing the tire resulting in slow air leakage, if normal then drive to the repair shop for inspection, if abnormal then replace the spare tire and go to the repair shop for repair or contact for rescue. There are four reasons why the tire pressure monitoring indicator light stays on: 1. The tire pressure monitoring light comes on due to a punctured tire; 2. Sometimes the tire pressure monitoring light comes on due to excessive tire pressure; 3. The tire pressure monitoring light comes on due to driving with low tire pressure for too long; 4. The tire pressure monitoring light comes on due to prolonged lack of air inflation leading to low tire pressure.
Was this review help?
2
1
Share
DelMorgan
08/14/25 8:40am
As an experienced driver who has been on the road for many years, I know at first sight when this warning light comes on that there might be tire trouble, which can't be ignored. I need to find a safe place to pull over and check immediately—I usually handle it at a service station or parking lot to avoid roadside dangers. First, I visually inspect the tire for obvious damage or signs of air leakage, then use my own tire pressure gauge to measure the pressure; the standard value is posted on the door frame. If it's low, I inflate it—I always keep a portable air pump in my car, and with a simple switch press, it's done. After filling, driving a few hundred meters should turn the light off; if it stays on, it might be a sensor issue or a real leak, so don't push it—head straight to a repair shop. Remember, low pressure affects handling, making the car prone to skidding or even a blowout during high-speed turns, increasing risks. I recommend making it a habit to check tire pressure weekly—keep it slightly lower in winter and not too high in summer. Prevention saves fuel and ensures safety—safe driving starts with the details.
Was this review help?
15
5
Share
Expand All
More Forum Discussions

What car has two inverted V logos?

The inverted V semi-circular logo belongs to NIO. Here are some relevant introductions about NIO: NIO Headquarters Location: NIO's headquarters is located in Hefei City, Anhui Province. NIO is a global smart electric vehicle company, founded in November 2014 under the leadership of William Li. NIO is a globally oriented startup brand, with research and development, design, production, and business institutions established in 13 locations including San Jose, Munich, London, and Shanghai, bringing together thousands of top-tier talents in the automotive, software, and user experience industries. NIO's Vehicle Models: Its main products include the NIO ES6, NIO ES8, NIO EC6, NIO EVE, NIO EP9, and NIO ET7. NIO is committed to creating a joyful lifestyle for users by providing high-performance smart electric vehicles and an ultimate user experience.
9
4
Share

Does the Audi A4 have an anti-pinch function for its windows?

Audi A4 is equipped with an anti-pinch function, which is enabled by default. Here is the relevant information: 1. Technology: The window anti-pinch technology is achieved through 'tactile' and 'visual' methods. 2. 'Tactile': The so-called 'tactile' method means that when the power window mechanism detects an obstacle on the glass, it will automatically stop the window from rising. 3. 'Visual': The more advanced control system relies on 'visual' detection, which is essentially an optical control system that monitors whether there are obstacles within the movement range of the power window, thereby controlling the glass movement without the need for the obstacle to come into contact with the glass. The Audi A4 inherits Audi's tradition of prioritizing safety, and its standard safety features create an ideal safety environment for passengers, meeting various international passive safety standards.
8
4
Share

Is the OBD Car Power Booster Effective?

OBD power optimization has some effect, but it is not comprehensive. The following is an introduction to OBD: 1. Main function: The main function of OBD is to read ECU data streams in real time, but optimizing the ECU data streams to achieve the goal of improving power and saving fuel is somewhat impossible. A balance between power and fuel efficiency is required, and you cannot have both. 2. Differences: It has now been upgraded to OBD-I, which differs from all previous on-board diagnostic systems in that it has strict emission targeting. Its actual performance is to monitor vehicle emissions by monitoring the vehicle's power and emission control systems. When there is a fault in the vehicle's power or emission control system that may cause carbon monoxide (CO), hydrocarbons (HC), nitrogen oxides (NOx), or fuel evaporation pollution to exceed the set standards, the malfunction indicator light will illuminate as an alarm.
4
2
Share

Where is the cabin air filter located in an old Mazda 3?

The cabin air filter in older Mazda 3 models is located beneath the glove compartment on the passenger side, and requires removal of the fuse box for access. Below are the functions of the cabin air filter in older Mazda 3 models: 1. Ensures the filter fits snugly against the housing to prevent unfiltered air from entering the cabin. 2. Filters out solid impurities such as dust, pollen, and abrasive particles from the air. 3. Absorbs moisture, soot, ozone, odors, carbon oxides, SO2, CO2, etc., from the air, with strong and lasting moisture absorption capabilities. 4. Prevents the car windows from fogging up, ensuring clear visibility for the driver and passengers, thus enhancing driving safety. It provides fresh air to the cabin, preventing occupants from inhaling harmful gases and ensuring driving safety. It also effectively sterilizes and deodorizes the air.
19
5
Share

What is the normal water temperature for a car in summer?

Generally, the normal operating temperature for small cars is between 80°C and 105°C. Below is a related introduction about the radiator: Concept: The car radiator, also known as the heat exchanger, is a key component in the car's cooling system. Its function is to dissipate heat. The coolant absorbs heat in the water jacket, flows to the radiator where the heat is dissipated, and then returns to the water jacket to circulate, achieving temperature regulation. It is a part of the car engine. Working principle: The radiator is an essential component of a water-cooled engine. As a crucial part of the cooling circuit in a water-cooled engine, it absorbs heat from the engine block to prevent overheating. Due to water's high specific heat capacity, the temperature rise after absorbing heat from the engine block is not significant. Therefore, the engine's heat is managed through the liquid circuit of the coolant.
10
0
Share

How Long After Applying Window Film in Summer Can You Roll Down the Windows?

You can roll down the windows three days after applying window film to your car in summer. The functions of car window film: Its main functions are to block ultraviolet rays, reduce heat, prevent injuries caused by flying glass shards, and reduce glare. Additionally, it can minimize damage to interior items and occupants from UV exposure, lower the car's interior temperature through physical reflection, reduce the use of air conditioning, thereby decreasing fuel consumption and saving costs. Precautions for car window film application: After applying the film, avoid rolling down the windows for three days; do not wash the car within three days. If bubbles appear at the edges of the film, they should be repaired at the installation site within 24 hours. Delaying beyond this period may cause the adhesive around the edges to dry completely, making the film immovable and likely to crease during repair.
5
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.