What to Do When the Tire Pressure Light Keeps Coming On?

What is the principle of PWM technology?

The basic principle of PWM is: the control method involves managing the switching of inverter circuit devices to generate a series of equal-amplitude pulses at the output. These pulses are used to replace sine waves or other desired waveforms. In other words, multiple pulses are generated within half a cycle of the output waveform, making the equivalent voltage of these pulses resemble a sine wave, resulting in a smooth output with minimal low-order harmonics. By modulating the width of these pulses according to specific rules, both the output voltage magnitude and frequency of the inverter circuit can be adjusted. Below is a detailed introduction to PWM: 1. Concept of PWM: PWM stands for Pulse Width Modulation, which is an analog control method. It modulates the bias of the transistor base or MOS gate according to changes in the corresponding load, thereby altering the conduction time of the transistor or MOS tube, thus changing the output of the switching power supply. 2. Advantages of PWM: The signals from the processor to the controlled system remain in digital form, eliminating the need for digital-to-analog conversion. This is because keeping the signal in digital form minimizes the impact of noise, enhancing noise resistance.

18

3

Share

What are the reasons why the car door key cannot be turned after insertion?

There are several reasons why the car door key cannot be turned after insertion: 1. Incorrect operation: For example, turning the key in the wrong direction. In most cases, turning the key clockwise unlocks the door, while turning it counterclockwise locks it. You can refer to the car's user manual for detailed instructions. 2. Problem with the lock cylinder: Owners often use the remote key to unlock or lock the car door, rarely using the mechanical key. If the keyhole is not used for a long time, the lock cylinder may rust. You can try adding some engine oil to the lock cylinder to lubricate it and see if it can be opened. If it still cannot be opened, the lock cylinder needs to be replaced. 3. Problem with the mechanical key: In most cases, the mechanical key does not have major issues. If there is a problem, it might be due to a later duplicated key that is incomplete. In this case, the key needs to be re-duplicated.

15

4

Share

What is the tire model of the Roewe 350?

The tire model of the Roewe 350 is 205/55R16, featuring a five-spoke wheel hub design. The tires are typically made of wear-resistant rubber material and can be classified into solid tires and pneumatic tires. Here are some relevant details: 1. Pneumatic tires: Composed of an inner tube and an outer tire, it is generally recommended to check the tire pressure at least once a month for regular cars, and adjust the tire pressure with each seasonal change. 2. Appearance: The Roewe 350 has body dimensions of 4521mm in length, 1788mm in width, and 1492mm in height, with a wheelbase of 2650mm. The interior of the Roewe 350 follows the family-style T-shaped layout, eschewing excessive embellishment in favor of a simple yet sporty design. The upper part of the center console features a matte black finish with chrome trim, giving it a premium look. The central LCD screen integrates functions such as navigation, a six-disc CD audio system, and a rearview camera.

2

5

Share

Which country does the Summit business vehicle belong to?

The Summit business vehicle is manufactured by American company Corti Automotive and is a relatively luxurious Mercedes-Benz V-Class model. Relevant details are as follows: Exterior: In terms of appearance, the V260L Corti Summit features a raised roof design, with completely customized upgrades to the front fascia and wheels. It is equipped with 314 silver-plated elements and 18-inch custom floating forged alloy wheels, with tire size being 235/50R18 of Michelin quiet-tire model. Interior: The dashboard of the Mercedes Summit's cockpit is entirely replaced by maple wood panels, with the upper dashboard area and both front seats newly wrapped in genuine leather. All seats are upholstered with Italian top-grain nappa leather, while the two independent aviation seats in the second row integrate 12-way power adjustment, seat heating/ventilation, pneumatic massage function, and lumbar support.

17

4

Share

How to Remove Adhesive from a Car?

Here are methods to remove adhesive from a car: 1. Vinegar: Use a dry dishcloth to soak up white vinegar or edible vinegar, completely covering the labeled area and letting it soak for 15-20 minutes. Then, use the dishcloth to gradually wipe off the adhesive label from the edges. 2. Alcohol: First, remove as much of the adhesive as possible from the sticky area. For the remaining parts, soak a cloth with alcohol and wipe the adhesive area, ensuring the alcohol fully penetrates. Wait a moment before wiping again with the cloth. 3. Nail Polish Remover: Similarly, remove as much adhesive as possible first, then soak a cloth with nail polish remover and wipe the sticky area. 4. Lemon Juice: Squeeze lemon juice onto the area with adhesive stains and rub repeatedly to remove the adhesive marks. 5. Hair Dryer: Use the hot air setting of a hair dryer, holding it about 10cm away from the adhesive. Blow hot air directly onto the adhesive for a while, then slowly peel off the label while continuing to blow hot air.

13

5

Share

Where to Add Water for the Windshield Wiper?

Location to add water for the windshield wiper: Open the front hood of the car, locate the blue cap behind the left headlight in the lower left corner, and you will see a white tube connected to a white jug-like object. The cap has a fan-shaped graphic on it, which is the windshield wiper fluid filler port. The water used for the windshield wiper is called windshield washer fluid, commonly known as glass water, and it is a consumable item in car usage. Windshield washer fluid has functions such as wetting, penetrating, solubilizing, etc., serving the purpose of cleaning and removing dirt. High-quality windshield washer fluid mainly consists of water, alcohol, ethylene glycol, corrosion inhibitors, and various surfactants. Windshield washer fluid can be classified by form into solid and liquid types, with solid windshield washer fluid mostly used in environments above 0 degrees Celsius.

18

5

Share

What to Do When the Tire Pressure Light Keeps Coming On?

What is the principle of PWM technology?

What are the reasons why the car door key cannot be turned after insertion?

What is the tire model of the Roewe 350?

Which country does the Summit business vehicle belong to?

How to Remove Adhesive from a Car?

Where to Add Water for the Windshield Wiper?

How much does the tenth-generation Civic weigh?

What Causes Sudden Loss of Power When Accelerating?

Where is the engine number of Hyundai Verna located?

What does the car icon on the dashboard represent?