What to Do When the Teapot-Shaped Light on the Car Comes On?

Can You Pass the Driving Test Without Remembering the Route for Subject Three?

It is possible to pass the Subject Three driving test even if you cannot remember the route. If a candidate really struggles to memorize the route, they should still try to familiarize themselves with it as much as possible and be well-versed in the operations required for each test item. During the exam, maintaining composure and following the voice prompts is crucial. Below are some important notes for the Subject Three test: 1. Check before getting in the car: Before the Subject Three test, you need to walk around the car once for inspection. The test vehicle usually has two sensors, one at the front and one at the back. When walking around the car, pause briefly near the sensors to ensure they detect you. 2. Adjust before operating: Adjust the car's rearview mirrors and seat height, then confirm if they are suitable. When observing through the rearview mirrors, make sure you can see the rear wheels. Fasten your seatbelt and ensure the gear is in the neutral position before starting the engine.

8

4

Share

Does an Air Filter with Cotton Affect Engine Power?

An air filter with cotton can indeed affect engine power. Here are the detailed explanations: 1. Explanation One: The function of an air filter is quite simple—it removes tiny impurities from the air. 2. Explanation Two: During operation, the engine needs to intake a large amount of air. If the air is not filtered, the dust suspended in the air will be drawn into the cylinders, accelerating the wear of the piston assembly and cylinders. 3. Explanation Three: Larger particles entering between the piston and cylinder can cause severe "cylinder scoring," which is particularly problematic in dry and sandy working environments.

17

1

Share

What are the key points of Subject 3 test?

Subject 3 test points are as follows: 1. Start slowly: 80% of failures during starting are due to nervousness and haste, either failing to control the clutch properly or forgetting to pull up the handbrake. 2. Ignite slowly: During the test, it's inevitable to encounter stalling. At this time, don't rush to ignite. After stalling, the first thing to do is to pull the handbrake and shift to neutral. 3. Steer slowly: Any significant steering wheel operation, such as lane changing or starting, requires the use of turn signals. The lights serve both illumination and alert functions, reminding other vehicles of your next move. 4. Brake slowly: When hearing the instruction, pay attention to decelerating, but don't slam on the brakes suddenly as it can easily cause a rear-end collision.

5

1

Share

What are the requirements for the duration and mileage of Subject 3?

Mileage must be no less than 300 kilometers. Subject 3 requires 12 hours of theoretical training and 24 hours of practical training, totaling 36 hours. Below are detailed introductions about it: 1. Introduction one: Subject 3 mainly focuses on mastering safe and civilized driving knowledge and possessing comprehensive vehicle control abilities. 2. Introduction two: It aims to develop the ability to consciously comply with traffic regulations, effectively handle random traffic situations, and unconsciously and reasonably operate the vehicle. 3. Introduction three: It involves understanding the dynamic characteristics of pedestrians and non-motor vehicles, as well as methods for predicting and analyzing risks, mastering general road and night driving techniques, and being able to drive safely under different road traffic conditions.

14

4

Share

What does engine cylinder misfire mean?

Engine cylinder misfire means that a single cylinder is not functioning. Below is relevant information about cylinders:1. Cylinder: An automobile cylinder is a cylindrical metal component that guides the piston to perform linear reciprocating motion within it. Air expands inside the engine cylinder to convert thermal energy into mechanical energy. Gas in the compressor cylinder is compressed by the piston to increase pressure. The housing of turbines, rotary piston engines, etc., is also commonly referred to as a "cylinder".2. Types: There are two types of cylinders - those performing linear reciprocating motion and those performing oscillating reciprocating motion. Cylinders performing linear reciprocating motion are further classified into single-acting cylinders, double-acting cylinders, diaphragm cylinders, and impact cylinders.

4

1

Share

When turning on the car air conditioner for cooling, should the vents face upward or downward?

According to the principle that hot air rises and cold air sinks, when turning on the cooling mode, the vents should face upward, and when turning on the heating mode, the vents should face downward. Here are some precautions for using the car air conditioner: 1. Be cautious about modifying the air conditioner: It is not recommended to modify the car's air conditioner as random modifications may affect the car's performance. 2. Do not set the air conditioner temperature too low: Choosing an appropriate air conditioner temperature is the first step in maintaining the air conditioner. 3. Function of the air conditioner: The car air conditioner is used to adjust and control the temperature, humidity, air cleanliness, and air flow inside the car compartment to the optimal state, providing passengers with a comfortable riding environment and reducing travel fatigue.

11

1

Share

What to Do When the Teapot-Shaped Light on the Car Comes On?

Can You Pass the Driving Test Without Remembering the Route for Subject Three?

Does an Air Filter with Cotton Affect Engine Power?

What are the key points of Subject 3 test?

What are the requirements for the duration and mileage of Subject 3?

What does engine cylinder misfire mean?

When turning on the car air conditioner for cooling, should the vents face upward or downward?

What Are the Reasons for Difficulty in Shifting Gears?

Can I leave directly after passing the Subject 4 test?

What Causes the Car Not to Move When Releasing the Clutch?

What lights to use when approaching an intersection?