What to Do When the Remote Control for the RC Car Doesn't Respond?

What does a faucet symbol on the car dashboard indicate?

When a faucet symbol appears on the car dashboard, it indicates the engine malfunction indicator light. If the engine malfunction light stays on continuously, you should stop the vehicle and call for professional assistance. However, in many cases, a continuously illuminated engine malfunction light does not signify a major issue—it could be a false alarm or a minor problem that doesn't affect driving. In such situations, you can safely drive to a repair facility for troubleshooting. The engine malfunction light is triggered by the ECU (Engine Control Unit), commonly referred to as the car's computer. The ECU controls all electronic components of the engine, including the electronic throttle, fuel injectors, alternator, fuel injection pump, catalytic converter, and more, covering systems such as intake, exhaust, fuel delivery, ignition, and timing.

1

0

Share

Why is the battery light on the car dashboard illuminated?

Car dashboard battery light is illuminated to alert the driver to promptly check for vehicle faults. If the battery light is on before starting the vehicle, it indicates that the alternator is not generating electricity and the battery is not charging. After the car starts, when the alternator begins generating electricity and the battery is in a charging state, the battery indicator light will automatically turn off. If the battery indicator light remains on after the vehicle starts, it means the alternator is not generating electricity. Reasons for the dashboard battery light being illuminated include: 1. Battery failure: The solution is to use a multimeter to test the battery voltage. If the voltage is low, charge it to restore; if the battery is faulty, replace it. 2. Loose or oxidized battery terminals: Poor contact can also cause the battery light to illuminate. The solution is to clean and tighten the battery connections.

18

1

Share

What does it mean when the blue water temperature light on the car dashboard is on?

When the blue water temperature light on the car dashboard is illuminated, it indicates that the water temperature is currently too low. If the light is blue right after starting the car, this is normal, and it will turn off once the car warms up. However, if the light remains blue continuously, it suggests a problem that requires inspection at a repair shop. The blue water temperature light signifies low water temperature; it will turn off after driving for a while or idling for some time as the temperature rises. Conversely, a red light indicates high water temperature, and the car should not be driven further. The blue or green water temperature indicator light on the dashboard is a normal low-temperature warning, indicating that the engine has just started and is in the warm-up phase. During this time, avoid aggressive driving to prevent severe engine wear due to low water temperature. The light will turn off once the water temperature reaches the optimal operating range for the engine.

17

1

Share

What does the engine symbol on the car dashboard mean?

The engine symbol on the car dashboard is an engine fault warning light, indicating that there is a fault in the engine. This light illuminates when the engine's electronic control system, sensors, or wiring malfunction, alerting the driver to promptly visit a 4S shop to address the issue. Modern cars generally do not experience serious mechanical problems, but sensors and electronic systems are the most prone to failure. It is advisable to avoid using low-quality fuel during regular use, as poor-quality fuel can also trigger the engine fault light. The engine is equipped with a knock sensor; when knocking is detected, the ECU will take corrective measures. If the vehicle requires high-octane gasoline but the owner consistently uses low-octane fuel, the engine fault light will illuminate. The car dashboard is a device that reflects the working status of various vehicle systems, commonly including indicators such as the fuel level light, washer fluid light, electronic throttle light, and front/rear fog light indicators.

13

5

Share

What does the engine symbol on the car dashboard mean?

The engine symbol displayed on the car dashboard indicates an engine fault. Possible causes include a malfunctioning air flow sensor or oxygen sensor, faulty spark plugs or ignition coils, dirty engine cylinders, carbon deposits causing engine knocking, or poor gasoline combustion. The exact cause needs to be diagnosed at an after-sales repair shop using specialized equipment to read the fault code. Ways the engine symbol appears on the dashboard and solutions: 1. There are several ways the engine fault light can illuminate: steady yellow light, flashing yellow light, steady red light, or flashing red light. If the red light is on, immediately go to a 4S shop for inspection and repair as the fault is severe. If the yellow light is on, the fault may not affect driving but should still be checked as soon as possible. 2. The car can read the fault code through the OBD interface using a computer. If you are interested in the vehicle's mechanical and electronic systems, you can purchase a Bluetooth module for the OBD interface to view and clear fault codes using a laptop or Android phone.

11

2

Share

What does it mean when the ABS light is on in a car?

When the ABS light is displayed in a car, it indicates a malfunction in the vehicle's Anti-lock Braking System. During emergency braking, if the wheels lock up, the vehicle may lose control and skid, making it difficult for the driver to slow down or adjust the vehicle's trajectory, which poses a significant safety hazard. There are several states in which the ABS light may illuminate, each with different causes and solutions, as detailed below: State 1: ABS warning light stays on continuously (most common). Cause 1: The ABS wheel speed sensor's sensing area is covered by dirt, mud, or other contaminants, affecting the sensor's ability to detect the corresponding speed signal. This prevents the ABS computer from determining the vehicle's speed and the wheel's slip rate, thus failing to issue appropriate commands to regulate braking. Solution: Clean the dirt from the wheel speed sensor and adjust the gap between the sensor and the signal ring to restore normal function. Cause 2: Poor signal transmission due to loose connections in the system wiring or poor contact in the ABS relay, leading to system failure. Solution: Check the wiring connections and reconnect any loose parts. State 2: ABS warning light intermittently illuminates and turns off when accelerating. Cause: When multiple vehicle electrical devices are in use, the battery voltage drops below 10.5V. As the engine speed increases, the voltage rises, and the ABS light turns off. This may also occur if the ABS system's power supply voltage is too low due to poor contact in the wiring or grounding. Solution: Check the battery's specific gravity; inspect the charging system; examine the power supply (e.g., voltage relay or poor power contact). State 3: ABS warning light stays on after engine start and only turns off when the engine is turned off (IGFF). Cause: Poor grounding contact in the ABS hydraulic valve body; poor contact in the ABS hydraulic valve body's wiring connector; ABS computer malfunction. Solution: Loosen and then retighten the grounding screw on the hydraulic valve body, cleaning the contact surface if necessary; check if the connector gap has widened; replace the ABS or ABS/ASR computer. State 4: ABS warning light illuminates during high-speed driving. Cause: During high-speed driving, the ABS computer detects a significant discrepancy between the rear and front wheel speeds; incorrect tire or wheel rim specifications. Solution: Refer to the vehicle's tire and wheel rim specifications, as indicated on the label near the fuel tank cap. State 5: ABS warning light intermittently illuminates. Cause: Improper adjustment of the brake light switch; poor internal contact in the brake light. Solution: With the engine running, press the brake pedal and use a finger to push the brake switch linkage down fully, then release the brake pedal to complete the self-setting position; replace the brake light switch if necessary.

15

4

Share

What to Do When the Remote Control for the RC Car Doesn't Respond?

What does a faucet symbol on the car dashboard indicate?

Why is the battery light on the car dashboard illuminated?

What does it mean when the blue water temperature light on the car dashboard is on?

What does the engine symbol on the car dashboard mean?

What does the engine symbol on the car dashboard mean?

What does it mean when the ABS light is on in a car?

What does EPC displayed on the car dashboard mean?

What does the steering wheel exclamation mark on the car dashboard mean?

What to Do When the Engine Yellow Light Appears on the Car Dashboard?

What does it mean when the engine yellow light is displayed on the dashboard?