What to Do When the Rear Wiper Makes Noise?

2 Answers
AylaLee
07/23/25 11:50pm
The causes and solutions for rear wiper noise are: 1. Wiper blade issues: Over time, wiper blades can age and harden, leading to noise. The solution is to replace the wiper blades with new ones; 2. Incorrect wiper arm angle: If the wiper blade jumps on the windshield, causing noise, adjust the wiper arm angle so that the blade is perpendicular to the windshield plane; 3. Foreign objects between the wiper blade and windshield: When the wiper is turned on, friction between the blade and windshield can produce a sharp noise. Owners should check and clean any debris under the wiper blade to ensure the wiper area remains clean.
Was this review help?
15
5
Share
PaisleeDella
08/10/25 7:40pm
I've been driving for many years and recently encountered the annoying issue of squeaky rear wipers. It happened during heavy rain, and the sound was as sharp as nails on a chalkboard. I first pulled over and cleaned the rear window and wiper blades with a wet cloth, as oil and dust buildup can cause friction noise. However, the noise persisted, so I inspected the blades and found the rubber had aged, with cracks along the edges. I bought a new set of wiper blades and replaced them myself—it was straightforward, and there are tutorials online. After the replacement, the noise disappeared immediately, making my driving experience much more pleasant. I recommend everyone pay attention to regular maintenance, cleaning the glass before rain and ensuring no debris accumulates under the blades. If the problem persists, it might be due to a deformed wiper arm or a loose motor, requiring a visit to the repair shop. Regular wiper maintenance can save you a lot of money—check them every six months and opt for professional-brand replacements for better durability.
Was this review help?
20
3
Share
Expand All
More Forum Discussions

What type of engine oil is recommended for the Ford Explorer?

Ford Explorer recommends using 5W30 engine oil. Below are the classifications of engine oil and the replacement intervals: Classifications of engine oil: Automotive engine oils are specifically classified into 4 types for summer use, 6 types for winter use, and 16 types for all-season use. Summer oils are graded as 20, 30, 40, and 50, with higher numbers indicating higher viscosity and suitability for higher temperatures. Winter oils are graded as 0W, 5W, 10W, 15W, 20W, and 25W, where "W" stands for winter. The smaller the number before "W," the lower the viscosity at low temperatures and the better the low-temperature fluidity. Replacement intervals for engine oil: Engine oils are divided into three types: mineral oil, semi-synthetic oil, and full synthetic oil. The replacement interval for mineral oil is 5,000 kilometers or 6 months, for semi-synthetic oil it is 7,500 kilometers or 9 months, and for full synthetic oil it is 10,000 kilometers or 1 year.
3
4
Share

How Often Should the Transmission Fluid in a Focus Be Changed?

The initial replacement of automatic transmission fluid for the Focus should occur at 55,000 kilometers, followed by subsequent changes every 60,000 kilometers. Below are the methods for changing the transmission fluid: 1. Gravity Drain Method. As the name suggests, the gravity drain method involves loosening the drain plug (or removing the oil pan) to allow the automatic transmission fluid to flow out under its own weight, then replenishing with new transmission fluid through the filler port. The drawback of this method is that it cannot completely drain all the fluid, with a replacement ratio potentially reaching only 50%, so the effect after adding new transmission fluid may not be very noticeable. However, the advantage of the gravity method is its lower cost, generally about half that of the machine exchange method. 2. Machine Exchange Method. The machine exchange method uses specialized equipment to generate pressure, dynamically replacing the fluid in the transmission's lubrication and cooling lines. This process takes longer. But its advantage is a more thorough fluid replacement, capable of removing over 95% of the old fluid, and it can also clean out sludge and metal shavings inside the automatic transmission.
17
5
Share

Which is more upscale, the Mercedes-Benz E-Class or C-Class?

Mercedes-Benz E-Class is more upscale. The Mercedes-Benz C-Class is merely the entry-level luxury series in the Mercedes-Benz brand, while the Mercedes-Benz E-Class is the flagship mid-to-large luxury sedan under Mercedes-Benz. Below is the relevant information: Different powertrains: As an entry-level model, the Mercedes-Benz C-Class offers three variants: C180, C260, and C300, corresponding to 1.6T, 1.5T+48V mild hybrid, and 2.0T powertrains respectively. In contrast, the Mercedes-Benz E-Class provides five variants: E200, E260, E300, E350, and E320, equipped with 2.0T low-power, 2.0T low-power+48V mild hybrid, 2.0T, 2.0T high-power+48V mild hybrid, and 3.0T V6 powertrains respectively. Different design features: The exterior and interior design of the Mercedes-Benz C-Class are more youthful, while the Mercedes-Benz E-Class leans more towards creating a luxurious atmosphere to highlight the elegance of a mid-to-large luxury sedan.
6
5
Share

How to Replace the Spark Plugs in a Verna?

Steps to replace the spark plugs in a Verna: Open the hood, lift the plastic cover of the engine, remove the high-voltage wires, and mark the position of each cylinder to avoid confusion. Use a spark plug socket to remove the spark plugs one by one. While removing them, check for any leaves, dust, or debris on the outside and make sure to clean them thoroughly. Place the new spark plugs into the spark plug holes, hand-tighten them a few turns, and then use the socket to tighten them further. Reinstall the high-voltage wires according to the firing order, and then secure the cover. Spark plug replacement interval: Under normal maintenance conditions, spark plugs should be replaced every 40,000 to 60,000 kilometers. However, this may vary depending on the brand and engine type, so it is recommended to follow the user manual. You can refer to the following standards for maintenance and replacement: Platinum spark plugs should be replaced at 40,000 kilometers, standard nickel alloy spark plugs at 20,000 kilometers, and iridium spark plugs at 60,000 to 80,000 kilometers.
10
3
Share

How to Deal with a Tire Blowout on the Highway?

In case of a tire blowout on the highway, firmly grip the steering wheel, wait for the vehicle to stabilize, then brake gently and move away from the main lane. Here are emergency measures to handle a high-speed tire blowout: 1. Never slam on the brakes: If a front tire blows out, hold the steering wheel tightly, adjust the car's direction, and avoid panicking by jerking the steering wheel repeatedly, which could cause severe skidding or even a spin. Gradually reduce speed by shifting to neutral or downshifting step by step, release the accelerator pedal, and gently press the brake pedal repeatedly to bring the car to a slow stop by the roadside. 2. Avoid sudden steering: If a rear tire blows out, the car's rear end may sway. Stay calm, grip the steering wheel with both hands, and usually, the car can be kept moving straight. Additionally, it's best to press the brake pedal repeatedly in a pumping motion. This shifts the car's weight forward, putting more pressure on the intact front tires and reducing the load on the blown-out rear tire.
7
0
Share

Where is the rear wiper switch on the Jeep Compass?

The rear wiper switch on the Jeep Compass is located on the right-hand stalk of the steering wheel. Here are some precautions for using the wipers: 1. Maintain cleanliness: When there are streak marks on the glass surface, the wiper blade may be dirty. You can sprinkle alcohol on a towel and wipe the surface of the wiper blade. Cleaning it once a month can improve the wiper's performance. 2. Check the rubber: If the wiper makes unusual noises while operating, the rubber blade may be aging or cracked. If the wear is not severe, you can use sandpaper to smooth out rough spots on the surface. 3. Avoid sunlight: Park the car in a shaded area, such as a garage, where it is not exposed to direct sunlight. Summer is particularly harsh on vehicles. Wiper blades are rubber products, and sunlight will only accelerate their aging. 4. Refill fluid: Adding plain water directly to the windshield washer reservoir is not conducive to the maintenance of the windshield and wiper blades in the long run. To ensure the longevity of the components, always use proper windshield washer fluid. Refill the washer fluid promptly to be prepared for unexpected needs.
1
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.