What to Do When the Rear of the Car is Tilted to the Right During Reverse Parking?

2 Answers
DeJeremiah
07/24/25 6:09am
If the rear of the car is tilted to the right during reverse parking, it indicates that the steering wheel was turned too early. In this case, you should straighten the steering wheel and adjust the vehicle. Below are some key points to note for reverse parking: 1. Maintain a steady speed: During the reversing process, control the clutch properly to keep the speed steady. It's best to wear thick-soled shoes while driving, preferably travel shoes with a thin front and thick back, featuring a slight slope. Thick soles make it easier and more stable to press the clutch, which is especially suitable for beginners. 2. Ensure the car body is fully in the parking space: The car body may not be fully in the space due to either misjudging the reference point or pressing the clutch and brake hastily because of excessive speed. Therefore, it's crucial to control the speed properly. 3. Stop immediately once in the space: After entering the parking space, be careful not to reverse too much; stop as soon as the car is in the space.
Was this review help?
1
5
Share
KathrynLee
08/11/25 1:54am
Last time when my car's rear kept veering to the right while reverse parking, I figured out a little trick: First, don't panic, gently straighten the steering wheel, and the rear will gradually move toward the center. When reversing, keep an eye on the lines in the rearview mirror to anticipate the direction of the rear movement. I often practice in an empty space, aligning with a pillar or a marker on the ground before reversing, then slightly easing off the fully turned steering wheel to let the car adjust slowly. As a beginner, I think controlling the speed is crucial—going too fast makes it easy to veer off. Also, check if your sitting posture is correct and keep your shoulders relaxed. After practicing a few times, I can now reverse steadily without scraping walls or other cars. I also watch tutorial videos before driving, which helps a lot.
Was this review help?
2
3
Share
Expand All
More Forum Discussions

What Are the Reasons for the Car Dashboard Not Lighting Up and the Engine Not Starting?

Car dashboard not lighting up and the engine not starting may be due to reasons such as a dead battery, insufficient fuel pressure, or a faulty starter motor. Dead Battery: The battery may be dead or short-circuited, possibly due to a faulty battery itself or because of electrical devices in the car that were not turned off, leading to the battery being drained. Insufficient Fuel Pressure: This could be caused by insufficient fuel pressure, incorrect throttle position sensor signals, poor fuel pump performance, or faulty spark plugs. Faulty Starter Motor: Apart from improper operation by the driver, it could also be due to a faulty starter motor, issues with the fuel pump supply or fuel injectors, or sensor malfunctions.
8
2
Share

What kind of engine oil can be used for Bora?

Bora can use 5w40 and 5w30 engine oil. The functions of engine oil are: lubrication, auxiliary cooling, cleaning, sealing and leakage prevention, rust and corrosion prevention, shock absorption, and anti-wear. Taking the 2021 Bora as an example, it belongs to the compact car category, with body dimensions of: length 4663mm, width 1815mm, height 1462mm, a wheelbase of 2688mm, a fuel tank capacity of 50l, and a curb weight of 1245kg. The 2021 Bora has a front suspension of MacPherson independent suspension and a rear suspension of torsion beam non-independent suspension. It is equipped with a 1.5l naturally aspirated engine, with a maximum horsepower of 113ps, a maximum power of 83kw, and a maximum torque of 145nm.
11
1
Share

How to Align the Timing Chain of a Kia Forte?

The method for aligning the timing chain of a Kia Forte is as follows: 1. Ensure the crankshaft is at the top dead center of the first cylinder, rotate the notches at the rear end of the intake and exhaust camshafts to a horizontal position, then attach the chain and accessories; 2. Secure the crankshaft pulley to the front cover with a 6mm screw, fix the crankshaft through the gear ring, and tighten the crankshaft pulley screw. Taking the 2019 Kia Forte as an example, its body structure is a 4-door, 5-seater sedan with body dimensions of: length 4510mm, width 1750mm, height 1470mm, a wheelbase of 2650mm, front track of 1542mm, rear track of 1553mm, a fuel tank capacity of 50 liters, and a curb weight of 1140kg.
1
1
Share

Where is the cabin air filter located in the Dongfeng Fengxing Lingzhi M5?

The cabin air filter in the Dongfeng Fengxing Lingzhi M5 is located behind the glove box on the passenger side. The functions of the cabin air filter are: 1. To provide fresh air; 2. To adsorb harmful substances; 3. To filter solid impurities. Taking the 2020 Dongfeng Fengxing Lingzhi M5 as an example, it is an MPV with body dimensions of: length 4715mm, width 1720mm, height 1955mm, and a wheelbase of 2800mm. The 2020 Dongfeng Fengxing Lingzhi M5 is equipped with a 1.6L naturally aspirated engine, delivering a maximum horsepower of 122PS, maximum torque of 151Nm, and maximum power of 90kW, paired with a 5-speed manual transmission.
8
5
Share

What kind of transmission does the Cadillac XT5 use?

Cadillac XT5 uses a 9-speed automatic manual transmission. The function of the transmission is to change the transmission ratio to expand the variation range of the driving wheel's torque and speed, adapt to frequently changing driving conditions, and allow the engine to operate under favorable working conditions. Taking the 2020 Cadillac XT5 as an example, it is a mid-size SUV with body dimensions of 4813mm in length, 1903mm in width, 1682mm in height, and a wheelbase of 2857mm. The 2020 Cadillac XT5 is equipped with a 2.0T turbocharged engine, with a maximum horsepower of 237PS, a maximum torque of 350Nm, and a maximum power of 174kW. It is paired with a 7-speed automatic manual transmission.
10
3
Share

Is it necessary to apply film to a newly purchased car?

It is not mandatory to apply film to a newly purchased car. The functions of car window film are: 1. Providing heat insulation in summer to save air conditioning energy; 2. Reducing energy loss in winter to maintain interior temperature; 3. Blocking UV rays, preventing direct sunlight exposure to interior decorations and prolonging their lifespan and quality; 4. Reducing glare to ensure safe and comfortable driving. Precautions after applying car film include: 1. Avoid rolling windows up and down for 3 days; 2. Do not clean the heat-insulating film or activate the defogging heating wires for one week; 3. Do not use fingernails or sharp objects to peel the edges of the film to prevent dirt from entering; 4. Avoid attaching suction cup items to the film for 1 to 2 weeks; 5. Bubbles, displacement, or blurred vision on the film surface should be promptly addressed by professional technicians to avoid compromising driving safety.
10
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.