What to Do When the Rear Door of the Car is Dented?

2 Answers
ODelaney
09/01/25 4:16am
Solutions for a dented rear car door: You can take it to a repair shop for panel beating and repainting. Automotive panel beating can restore the deformed parts of the car's outer shell. For example, if the car's outer shell has a dent, panel beating can return it to its original shape. Then, by applying specialized paint, the deformed metal surface of the car can be restored to match the undamaged areas, making it look as good as new. You can also purchase a dent repair kit. First, clean the dented area thoroughly. Then, load the special glue into the glue gun and plug it in to preheat for about 7 minutes. Next, choose an appropriate pad—note that larger dents require larger pads, as bigger pads provide greater traction. Apply the glue evenly on the pad using the glue gun and quickly press it onto the dented area. Hold it gently until the glue sets firmly. Align the hole in the center of the pull bridge with the firmly attached pad, place the nut onto the screw rod of the pad, and tighten it. Continue turning the nut until the dent is pulled out and leveled. After the repair is complete, remove the tools, spray alcohol on any residual glue on the car body, and finally clean it off with a scraper.
Was this review help?
3
5
Share
SawyerAnn
09/13/25 7:04am
Looking at that big dent on the tailgate, my heart sank. Last time when my own car got dented, experience told me to stay calm first. For small dents, I tried pulling it out myself with a suction cup - tools bought online cost just dozens of yuan, and it only took a few minutes to fix; but if the dent is too deep or has cracks, don't force it to avoid making it worse. Then quickly take photos as evidence. If it's an accident, contact the insurance company promptly - they can reimburse part of the cost. Next, take it to a professional auto repair shop for assessment. The mechanics will use professional tools to straighten the metal and do bodywork and repainting, costing anywhere from a few hundred to a few thousand yuan depending on severity. After repairs, don't forget to check the door locks and seals to ensure proper operation and waterproofing. When parking normally, be more careful - adding a reversing camera can prevent future incidents. In short, timely handling is key - don't delay until it becomes a safety hazard.
Was this review help?
5
0
Share
Expand All
More Forum Discussions

How to activate the automatic handbrake on a Camry?

Mechanical handbrake, located on the left side of the gear lever, is engaged by lifting the handbrake lever and released to allow the vehicle to move. Electronic foot brake, located on the left side of the brake pedal, is engaged by pressing the brake with the left foot to stop the vehicle, and released by pressing and then lifting the foot. Electronic handbrake, located behind the gear lever, is engaged by lifting it with a finger when the vehicle is stationary, and released by pressing the brake pedal and then pressing the electronic handbrake button before starting the vehicle. Alternatively, it can be automatically released by lightly pressing the accelerator while wearing the seatbelt.
19
1
Share

What are the correct driving steps for an automatic transmission car?

The correct driving steps for an automatic transmission car: 1. Turn the ignition key to the second position (power mode) to allow the car's computer system to perform self-check for at least 6 seconds. 2. Press the foot brake and shift the gear from P to N. 3. Release the foot brake and turn the ignition key to start the engine. 4. When starting the car after prolonged parking, it's recommended to warm up the engine for 1-2 minutes while stationary. 5. Press the foot brake and shift the gear from N to D, then release the parking brake (for electronic parking brake, simply press the button briefly). 6. Gradually release the foot brake to start moving. 7. Apply the accelerator smoothly according to road conditions for safe driving.
2
1
Share

What Causes the Abnormal Noise After Installing Snow Tires?

The reasons for abnormal noise after installing snow tires include severely worn brake pads, damaged shock absorbers, deformed wheel hubs, tire wear, or damaged drive shafts. Causes: The vehicle's braking force will decrease when encountering objects like nails or stones. Solutions: Promptly replace the brake pads. If the wear on the left and right drive wheels is uneven, it is generally recommended to first install new tires on the non-driven wheels for some mileage. After the four tires have worn in, perform a cross rotation. For regular use, it is best to perform a cross rotation every 20,000 kilometers, as the driven wheels are dragged along and tend to wear unevenly compared to the drive wheels. Have a repair shop inspect further. Replace the wheel hub if necessary.
1
1
Share

What brand is Qoros?

Qoros is an independent automotive brand, which was founded in China. Qoros Auto is a joint venture company providing automotive products and services, headquartered in Changshu, Jiangsu. The models under the Qoros brand include: Qoros 3, Qoros 7, Qoros 5, Qoros 3 City SUV, and Model Young. Taking the Qoros 3 as an example: it is a compact car with a length, width, and height of 4627mm, 1839mm, and 1445mm respectively, and a wheelbase of 2702mm. In terms of power, the Qoros 3 is equipped with an L4 turbocharged engine, paired with a CVT continuously variable transmission, delivering a maximum power of 115kw and a maximum torque of 230nm.
16
4
Share

How to Playback Recorded Videos on Camry Dash Cam?

Remove the TF memory card from the dash cam, insert it into a card reader, and then connect it to a computer to access the recorded content. Connect the dash cam to a computer using a USB cable, and the computer will recognize the dash cam as a mass storage device. The dash cam is equipped with a display screen. You can playback videos directly on the dash cam. The general method is to first pause the recording, then press the "MODE" button. Locate the recorded video and click "OK" to play it. Press the MODE button to make a selection and click on the recorded video file.
14
3
Share

What causes the airbag warning light to illuminate on the dashboard?

The reasons for the airbag warning light illuminating on the dashboard: 1. Foreign objects around the airbag sensor wiring harness, especially metal debris causing a short circuit, leading to false warnings. 2. The warning light may illuminate due to erroneous data reported by the car's ECU sensor. 3. If the warning light comes on without reason, it is likely caused by the vehicle being parked in a humid environment for a long time or moisture in the wiring connectors during car washing, resulting in a short circuit. 4. A fault in the airbag itself, mostly caused by loose connectors. However, if the USB also fails, the fault in the airbag itself can be largely ruled out.
13
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.