What to Do When the Porsche Engine Control Device Fails?

1 Answers
VanAva
07/29/25 7:52pm
It should be the exhaust gas warning light. When this light stays on for a long time, it indicates a fault in the engine that reduces exhaust gas quality. The possible causes are either a damaged oxygen sensor or a faulty catalytic converter. It is advisable to promptly conduct an inspection and address the issue. Below is an introduction about Porsche: 1. Introduction: Porsche is a luxury car brand under the German Volkswagen Group and a major representative of European and American automobiles. It was founded in 1931 in Stuttgart, Germany. 2. Logo: The English logo of Porsche adopts the surname of Ferdinand Porsche, the founder of the German Porsche company. The graphic logo features the shield-shaped city emblem of Stuttgart, where the company is headquartered. 3. Brand Collaboration: In February 2018, Audi and Porsche announced their collaboration to develop an electric vehicle platform, planning to invest nearly one billion euros by 2025.
Was this review help?
1
4
Share
More Forum Discussions

Is Ford Owned by Changan Automobile?

Changan Ford is a model under Changan Automobile, a joint venture brand jointly invested by Changan Automobile and Ford Motor Company. Ford is a world-renowned automotive brand, one of the many brands under the American Ford Motor Company. The company and brand name "Ford" originates from the surname of its founder, Henry Ford. Below is an introduction to the Ford Escape: 1. Exterior: The Ford Escape ESCAPE is designed with the concept of "still waters run deep," creating a serene blue water droplet shape. The 2.0T 4WD Enjoyment Edition and 2.0T 4WD Premium Edition feature a highly recognizable octagonal starry sky concept grille, shimmering like a vast nebula; paired with 3D-LED headlights using a layered progressive module, presenting a jewel-cut effect. 2. Power: The Ford Escape is equipped with the fourth-generation EcoBoost 2.0L twin-scroll turbocharged engine + 8AT golden powertrain combination + new intelligent all-wheel drive, delivering a maximum power of 248 horsepower and a peak torque of 393 Nm.
18
2
Share

How often should the transmission fluid be changed for the Peugeot 3008?

The transmission fluid for the Peugeot 3008 should be changed every 60,000 to 80,000 kilometers. Transmission fluid is an oil product that keeps the gear system clean, ensuring the proper functioning of the transmission and extending the lifespan of the transmission components. The Peugeot 3008 is equipped with a 1.6T turbocharged engine and a 6-speed automatic transmission, delivering a maximum power of 123 kW and a maximum torque of 245 Nm. The Peugeot 3008 features front-wheel drive, with a MacPherson strut front suspension and a torsion beam rear suspension. Its dimensions are 4435mm in length, 1840mm in width, and 1652mm in height, with a wheelbase of 2613mm.
2
3
Share

How to Turn Off the Horn Sound When Locking the Emgrand?

To disable the horn sound when locking the Emgrand, navigate to the settings in the car's central control screen and turn off the horn option. If the device was installed later, you can simply unplug the connected wires to directly deactivate the locking horn sound. The Emgrand is a compact car with dimensions of 4632mm in length, 1789mm in width, and 1470mm in height, and a wheelbase of 2650mm. The vehicle features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension. It is equipped with a 1.5L inline 4-cylinder naturally aspirated engine, delivering a maximum horsepower of 109PS and a peak torque of 142Nm.
3
4
Share

What is the reason for severe water accumulation in the rear seats of a 2012 Tiguan?

The severe water accumulation in the rear seats of a 2012 Tiguan is caused by the failure of the door waterproof membrane. The hazards of a water-damaged vehicle include the following 2 points: 1. Interior impact: Materials such as carpets and seats inside the vehicle may deform, become rough, and produce odors due to prolonged soaking, leading to bacterial growth. The wiring harness under the carpet may retain heavy moisture, causing short circuits due to dampness. These soaked components are best replaced to avoid post-flooding complications. 2. Door panel impact: The door panels contain sound insulation foam, which needs to be replaced after water damage. The wheel bearings must also be replaced because the bearing seals contain lubricating oil. If not replaced, the oil can corrode and deteriorate, losing its lubricating function and affecting driving safety.
17
1
Share

What Are the Consequences of Missing the Scheduled Subject 2 Test?

If you successfully scheduled the Subject 2 test but neither attended nor canceled it, the consequence is that you will be marked as having failed this attempt. If you have scheduled a Subject 2 test but cannot attend due to unforeseen circumstances, it is crucial to cancel the test promptly. Otherwise, you will waste one of your Subject 2 test opportunities and prolong the time required to obtain your driver's license. It is possible to cancel a successfully scheduled Subject 2 test, but the cancellation must be made at least 24 hours before the test date. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": If an applicant cannot attend the test at the scheduled time, they must apply to cancel the appointment at least one day in advance. If the applicant fails to attend the test at the scheduled time without canceling, they will be marked as having failed that test attempt. First, if you miss a scheduled test, it will be recorded as an absence. According to the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses": Each applicant has five test attempts for Subjects 2 and 3, with each attempt including one test and one immediate retest if the initial test is failed. Therefore, missing one test means losing one test opportunity. If you fail all five attempts for Subject 2, you will have to re-enroll in a driving school and pay the tuition fees again. Second, if you miss this test, you will need to pay a retest fee for the next attempt. The retest fee varies across different regions in the country, so you should consult your local vehicle management office for specific details.
4
3
Share

How many brake lights does the Tharu have?

The Tharu has 1 brake light. Brake lights are generally installed at the rear of the vehicle, featuring a red-colored main body to enhance light penetration. This ensures that following vehicles can easily detect when the front vehicle is braking, even in low visibility conditions, thereby helping to prevent rear-end collisions. The Tharu is a compact 5-door, 5-seat SUV with dimensions of 4453mm in length, 1841mm in width, and 1632mm in height, and a wheelbase of 2680mm. It is equipped with a 1.4T turbocharged engine, delivering a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
12
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.