What to Do When the Passat Multimedia Screen Goes Black?

What Does Automotive Sheet Metal Technology Mean?

Automotive sheet metal (Metal-Plate) is a technical method in automobile repair, where automotive sheet metal is equivalent to automotive sheet metal repair. It refers to all the work required to restore a vehicle's body after a collision, excluding the anti-corrosion and decorative spray painting of the body. Below is a relevant introduction: Introduction: Automotive sheet metal is a processing method in automobile repair, also known as cold working. Simply put, if the vehicle's exterior is damaged or deformed, the sheet metal process is necessary. Automobile collision repair has evolved from the original 'hammering, pulling, welding, and patching' to the secondary manufacturing and assembly of the vehicle body. Material Requirements: Sheet metal materials must have excellent plasticity. They must possess the ability to undergo permanent deformation under external forces without being destroyed. For cold-worked parts, good cold plasticity is required, such as automotive stamping parts; for hot-worked parts, good hot plasticity is necessary, such as hot-forged spring steel plates and hot-riveted rivets.

10

2

Share

Do 8-year-old vehicles exempt from inspection still need to apply for the annual inspection sticker?

Vehicles in their eighth year are not exempt from inspection and require an on-site inspection at the vehicle management office before obtaining the annual inspection sticker. Therefore, for an eight-year-old vehicle, you should schedule an inspection at the vehicle management office within three months before the inspection expiration date. Alternatively, you can follow the legal dates suggested by the traffic management app 12123 to arrange the inspection. Below are the relevant details: Inspection schedule: Vehicles older than six years no longer qualify for the six-year exemption from on-site inspections. They must undergo an inspection at the vehicle management office every two years after reaching six years of age. After ten years, an annual inspection is required. Once the vehicle passes the inspection at the designated testing station, it will receive an inspection compliance sticker. Consequences of skipping inspection: Missing the inspection deadline places the vehicle in an unregistered status, making it illegal to drive. If caught by traffic police, the owner will face penalties and demerit points. Therefore, it is crucial to complete the inspection on time, especially for vehicles older than six years. Vehicles that fail to undergo inspection for three consecutive cycles will enter the mandatory scrapping process, rendering them unusable. If discovered by traffic police, they will be directly processed for scrapping.

15

2

Share

Which Gear Should Be Used for Climbing Hills?

Which gear to use for climbing hills depends on the type of vehicle: For manual transmission cars, you can use 2nd or 3rd gear when climbing hills; for automatic transmission cars, you can use the S (Sport) or L (Low) gear, or simply the D (Drive) gear. Below are the relevant details: Manual Transmission Cars: A manual transmission car uses a manual gear-shifting mechanical transmission to adjust speed. The driver must manually shift the gear lever to change the gear engagement inside the transmission, altering the gear ratio to achieve speed changes. The gear lever can only be moved when the clutch is depressed. Automatic Transmission Cars: An automatic transmission car does not require the driver to manually shift gears. The vehicle automatically selects the appropriate gear based on driving speed and traffic conditions.

20

5

Share

Under What Conditions Can You Take the Subject 4 Test?

Generally, you can schedule the Subject 4 test three days after passing the Subject 3 test. The processing time for Subject 4 is relatively fast, and it usually takes two to three working days to secure an appointment. Below is an introduction to the passing scores for the driving test: Subject 1: Road traffic safety laws, regulations, and related knowledge test. It is a written test conducted on a computer, with a full score of 100, and a passing score of 90 or above (including 90). Subject 2: Field driving skills test. It is conducted in a real vehicle within a designated area, with results categorized as pass or fail only. The test includes five mandatory items performed in sequence: reversing into a garage, parallel parking, S-curve driving, right-angle turning, and starting and stopping on a slope. The full score is 100, with a passing score of 80 or above (including 80). Subject 3: Road driving skills test. It is conducted on a real vehicle on a road or simulated field, with a full score of 100. The passing scores are 90 or above for large buses, 80 or above for large trucks, and 70 or above for other vehicle types. Subject 4: Safe and civilized driving-related knowledge test. It is a written test with a full score of 100, and a passing score of 90 or above (including 90).

16

2

Share

What Causes Difficulty in Starting a Car but It Still Starts?

Difficulty in starting a car but it still starts is usually caused by aging spark plugs, throttle body, or car battery. For gasoline vehicles, after removing the air filter to check and confirm there is no blockage, inspect the spark plugs, high-voltage wires, ignition coils, and fuel injectors. Poor ignition or inadequate fuel injection can lead to difficulty in accelerating. The reasons for difficulty in starting a car are as follows: Carbon deposits: Difficulty in starting caused by carbon deposits in the car, accompanied by slight shaking at idle speed, can be resolved by cleaning the throttle body, intake manifold carbon deposits, and fuel injectors. Weak battery: A weak battery is a more common issue, and the first thought when a car won't start is usually that the battery is dead. The solution is simple: just jump-start the car using another vehicle or battery.

13

0

Share

Can a car still run without coolant?

A car cannot continue to drive without coolant. The absence of coolant prevents proper circulation, causing the engine to overheat as it cannot dissipate heat effectively. In severe cases, this can lead to engine damage. The method for replacing coolant is as follows: Before completely replacing the coolant, conduct a thorough inspection to check for any leaks or cracks in the pipelines, with a focus on the five-way hose. Coolant flows through the five-way hose and is distributed to different parts of the car to function. If there are signs of coolant leakage in this section, replace the hose or resecure the connection as needed. Drain the old coolant and then flush the liquid channels with clean water. Add clean water to the coolant reservoir, then continuously inject water into the reservoir so that it flows through the engine cooling system. Start the engine and let it idle for 3 to 5 minutes to circulate the water. The water initially draining from the reservoir may appear slightly pink. Continue adding clean water until the outflowing water is clear. Note: Remember to remove the heater hose and drain the water from the heater core. After draining for about an hour, add the new coolant through the radiator hose. Then, pour another container of coolant into the coolant reservoir until it is nearly full. Start the engine and let it run for about 10 minutes. As some air is expelled from the cooling system, the coolant level will drop. Add more coolant until it reaches the "MAXT" mark on the reservoir.

16

2

Share

What to Do When the Passat Multimedia Screen Goes Black?

What Does Automotive Sheet Metal Technology Mean?

Do 8-year-old vehicles exempt from inspection still need to apply for the annual inspection sticker?

Which Gear Should Be Used for Climbing Hills?

Under What Conditions Can You Take the Subject 4 Test?

What Causes Difficulty in Starting a Car but It Still Starts?

Can a car still run without coolant?

What Are the Reasons for a Scooter Making Noise but Not Moving When Throttling?

What does variable suspension adjustment mean?

What is the wading depth for motorcycles?

Does sand blowing into the intake pipe when replacing the air filter have any impact?