What to Do When the Passat Door Lock Won't Open?

What engine does the GAC Trumpchi GS4 use?

The engine of the GAC Trumpchi GS4 is independently developed and produced by GAC Motor Co., Ltd., and is a domestically manufactured engine. The engine model of the GAC Trumpchi GS4 is A415J1, with a maximum power of 124 kW, a maximum torque of 265 Nm, and a maximum horsepower of 169. For daily maintenance of the GAC Trumpchi GS4 engine, the following methods can be used: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, the performance deteriorates, which can cause various problems for the engine. To avoid failures, the oil should be changed regularly based on usage conditions, and the oil level should be kept moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, the filter element may burst or the safety valve may open, allowing oil to bypass through the bypass valve, bringing contaminants back to the lubrication area and accelerating engine wear, increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

18

5

Share

What details should you pay attention to when buying a new car?

When buying a new car, pay attention to the following details: 1. Body appearance: Drive the vehicle to a well-lit area for inspection, focusing on the bumper and body gaps, and open the doors to check for any color difference between the interior and exterior paint; 2. Vehicle glass: Each car's nameplate corresponds to an engine number and chassis number—verify that these codes match the ones on the certificate of conformity; 3. Tire inspection: Normal new car tires should have no damage on the sidewalls and no puncture marks on the tread; 4. Check all lights, including daytime running lights, low beams, high beams, fog lights, turn signals, brake lights, reverse lights, high-mounted stop lamps, dashboard lighting, door lights, reading lights, and storage compartment lighting.

20

0

Share

Can vehicle annual inspection be conducted across cities?

Vehicle annual inspection can be conducted across cities. The specific methods are: 1. The vehicle owner needs to obtain an entrustment inspection notice from the original registration vehicle management office, agreeing to entrust the vehicle management office to conduct the annual inspection of the vehicle; 2. After the vehicle owner completes the cross-regional entrustment vehicle annual inspection procedures at the original registration vehicle management office, the original registration vehicle management office will issue a paper entrustment letter to the applicant and send an online entrustment vehicle annual inspection notification to the entrusted vehicle management office; 3. After the entrustment vehicle annual inspection procedures are completed, the vehicle owner drives the vehicle to the inspection hall next to the vehicle management office for online inspection; 4. After the vehicle passes the inspection, the vehicle inspection report is taken to the window of the vehicle management office service hall to print the inspection qualification mark; 5. After the vehicle annual inspection is completed, the vehicle annual inspection information will be transmitted back to the original registration vehicle management office through the network.

12

0

Share

How to Solve the Problem of a Car That Won't Start?

Here are the solutions for a car that won't start: 1. Check if components such as spark plugs and high-voltage wires have gotten wet due to rain. If so, dry the wet parts before attempting to start the car again. 2. Inspect the spark plugs for damage. If they are damaged, simply replace them with new ones. 3. Verify the battery voltage. A green indicator means the battery is in good condition, black indicates it needs recharging or maintenance, and white means the battery should be replaced. The steps to start a car are: 1. Insert the key into the ignition and turn it to the second position (power-on mode), then wait for the system to complete its self-check. 2. Shift the gear lever from P (Park) to N (Neutral). 3. Release the brake and start the car's engine. 4. Press the brake pedal with your foot, shift the gear lever from N to D (Drive), release the brake, and press the accelerator to start moving.

19

4

Share

What engine is used in the Baojun 310?

The engine of the Baojun 310 is produced by SAIC-GM and is a domestically manufactured four-cylinder naturally aspirated engine. The engine model of the Baojun 310 is LMH, with a maximum power of 59 kW, a maximum torque of 112 Nm, and a maximum horsepower of 80. For daily maintenance of the Baojun 310 engine, the following methods can be used: Use lubricating oil of the appropriate quality grade. For gasoline engines, choose SD--SF grade gasoline engine oil based on the additional equipment of the intake and exhaust systems and usage conditions; for diesel engines, choose CB--CD grade diesel engine oil based on mechanical load, with the selection standard being no lower than the manufacturer's requirements. Regularly change the oil and oil filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, its performance deteriorates, which can cause various problems for the engine. To avoid failures, change the oil regularly based on usage conditions and maintain an appropriate oil level. When oil passes through the fine pores of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and the oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and carry contaminants back to the lubrication areas, accelerating engine wear and increasing internal contamination. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal particles from component wear to form sludge. In small amounts, it remains suspended in the oil; in large amounts, it precipitates out, clogging the filter and oil passages, making engine lubrication difficult and causing wear. Regularly use a radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.

8

3

Share

How to Open the Fuel Tank of Borgward BX7?

To open the fuel tank of the Borgward BX7, simply press the fuel tank cover when the vehicle is unlocked. The inner fuel tank cover has a designated placement area, so the owner does not need to hold it during refueling. The Borgward BX7 features a robust design with a roof-mounted spoiler that integrates a high-mounted brake light, using LED light strips. Additionally, the new car adopts a dual-exhaust layout on both sides. The dimensions of the Borgward BX7 are 4715mm in length, 1911mm in width, and 1690mm in height, with a wheelbase of 2760mm. It is equipped with a 6-speed automatic transmission and features such as front seat heating, rear parking radar, automatic parking, electronic parking brake, ECO mode, and electronic stability control.

5

3

Share

What to Do When the Passat Door Lock Won't Open?

What engine does the GAC Trumpchi GS4 use?

What details should you pay attention to when buying a new car?

Can vehicle annual inspection be conducted across cities?

How to Solve the Problem of a Car That Won't Start?

What engine is used in the Baojun 310?

How to Open the Fuel Tank of Borgward BX7?

Does Mini have rear-wheel drive models?

What does the driving license test subject 3 include?

What is the actual fuel consumption of the Honda CR-V 2.0?

What are the components of the Traction Control System?