What to Do When the Parking Brake of the Tiguan Fails?

1 Answers
LaTheo
07/30/25 2:46am
It is likely caused by liquid entering the electronic parking brake switch, leading to a short circuit. It is also necessary to check if the electronic parking brake fuse has melted and replace it if needed. More relevant information is as follows: 1. Parking Brake: Usually refers to the manual brake installed in motor vehicles, commonly known as the handbrake, used to stabilize the vehicle after it has come to a stop, preventing accidents caused by rolling on inclined surfaces. The common handbrake is typically located at the right hand side of the driver for easy access. 2. When Applying the Parking Brake: Press down on the brake pedal and pull the parking brake lever all the way up. 3. Precautions: For vehicles equipped with an automatic transmission, always apply the parking brake first before shifting the gear lever to the "P" (Park) position. When parking on an incline, if you shift to "P" first and then apply the parking brake, the weight of the vehicle may make it difficult to shift out of the "P" (Park) position when preparing to drive.
Was this review help?
19
3
Share
More Forum Discussions

Where is the car's carbon canister located?

The car's carbon canister is located between the engine and the fuel tank. The function of the carbon canister is to handle fuel vapors generated by the fuel tank at normal temperatures. The fuel evaporation emission system directs these vapors into the combustion process, preventing them from being released into the atmosphere, thereby reducing air pollution. The key component in this system is the activated carbon canister storage device. The carbon canister is a part of the fuel vapor emission system, also known as EVAP. Since fuel is a highly volatile liquid, the activated carbon canister is used to prevent the release of fuel vapors into the atmosphere, which would pollute the environment. The canister is filled with activated charcoal, and the fuel vapors evaporated from the fuel tank are directed into the canister for storage.
7
3
Share

How to Display the Water Temperature Gauge on the New Santana?

Methods to display the water temperature gauge on the New Santana: 1. Connect the vehicle computer with a data cable; 2. Modify the coding in the central electrical system; 3. Add a toggle switch. A 5053 data cable is required to connect to the vehicle's computer for these simple operations. The New Santana is a car produced by Shanghai Volkswagen, with body dimensions of 4473mm in length, 1706mm in width, and 1469mm in height, a wheelbase of 2603mm, a top speed of 185km/h, front disc and rear drum brakes, and equipped with 1.4L and 1.6L naturally aspirated engines.
18
4
Share

Is the Toyota Highlander a Prado?

Toyota Highlander is not a Prado. It is a large-sized SUV produced by Toyota, with a maximum wading depth of 455mm, front-wheel drive, and a top speed of 180km/h. The vehicle has a wheelbase of 2790mm, with length, width, and height dimensions of 4890mm, 1925mm, and 1720mm respectively. The Toyota Highlander is equipped with a 2.0-liter turbocharged engine, model code 8AR-FTS, delivering a maximum power of 162kW and a maximum torque of 350Nm. It features hybrid injection technology and an aluminum alloy cylinder head and block, paired with a 6-speed automatic transmission.
4
0
Share

Can Sheet Metal Repair Achieve the Original Factory Effect?

Sheet metal repair cannot achieve the original factory effect. The quality of a car's paint surface is not only determined by the paint itself but also by the spraying process and the limitations of spraying conditions. Most painted car exteriors have deformations and generally require sheet metal correction, which can compromise the performance of the metal substrate. Modern cars mostly use steel plates with a double-sided galvanizing process, followed by surface heat treatment to enhance the metal's strength and hardness. However, after sheet metal repair, the galvanized layer on the surface is damaged. If heating is used during the sheet metal process, the metal material may undergo annealing, significantly reducing its strength and hardness.
9
3
Share

Is the Cadillac ATSL rear-wheel drive or front-wheel drive?

Cadillac ATSL is a rear-wheel drive vehicle, equipped with a 2.0-liter turbocharged engine across the entire lineup. The maximum power output is 205kW, with a peak torque of 400Nm, and the maximum power speed is 5500 rpm. It features direct fuel injection technology and an aluminum alloy cylinder head and block. The Cadillac ATSL is a sporty mid-size sedan under the Cadillac brand, with body dimensions of 4643mm in length, 1806mm in width, and 1420mm in height, a wheelbase of 2775mm, a top speed of 240km/h, and a body structure configured as a 4-door, 5-seater sedan.
9
1
Share

What are the reasons for abnormal noise from newly replaced brake pads?

The reasons for abnormal noise from newly replaced brake pads are: 1. Abnormal noise when braking: caused by wear between the brake pads and brake discs. The old brake pads and discs have been used together for a long time, forming a complementary shape. When new brake pads are installed, the edges of the pads may not make even contact with the discs, leading to friction and noise; 2. Issues with brake pad material: if non-standard brake pads are used, the larger particles in the material can easily cause noise when braking; 3. Installation problems: such as not applying lubricant or improperly installed brake pad shims; 4. Brake caliper not retracting properly: check if the brake caliper can retract normally, and replace it promptly if it cannot.
20
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.