What to Do When the Outside of the Windshield Fogs Up on Rainy Days?

1 Answers
Jonah
07/30/25 8:16am
When the windshield fogs up on rainy days, the following methods can help remove the fog: 1. Turn on the defroster in the car: Activate the defroster while pressing the compressor (A/C) button. This will lower the temperature inside the car, which might feel cold in autumn and winter, but the defogging effect is noticeable. 2. Turn on the warm air from the air conditioner: Increase the airflow. The dry, warm air will evaporate the moisture inside the car, preventing fog from forming on the windshield. 3. Purchase dry anti-fog wipes: Before use, wipe the windshield with a damp cloth or apply the wipe directly when fog appears. This can prevent fogging for up to 24 hours. 4. Buy wet anti-fog wipes: Wipe the fogged area directly, and it will remain fog-free for up to 24 hours. 5. Purchase anti-fog spray: Spray the anti-fog solution directly onto the windshield. The effect typically lasts around 10 days, with high-quality sprays even lasting up to a month, far outperforming anti-fog wipes.
Was this review help?
4
5
Share
More Forum Discussions

How to Open the Trunk of a Mercedes-Benz E300?

There are two methods to open the trunk of a Mercedes-Benz E300: 1. Press and hold the trunk button on the car key to open it; 2. The owner can find the trunk release button in front of the door storage compartment. The Mercedes-Benz E-Class is a mid-to-large-sized high-end business sedan, coupe, and station wagon developed by Mercedes-Benz, positioned between the C-Class and S-Class. The E300 is equipped with a 2.0T turbocharged engine, delivering a maximum power of 245 horsepower and a peak torque of 370 Nm, paired with a 9-speed automatic transmission. In terms of dimensions, the E300 measures 4947mm in length, 1850mm in width, and 1470mm in height, with a wheelbase of 2939mm.
5
1
Share

How to Remove a Car Tire?

The method to remove a car tire: 1. The car owner needs to prepare all the tools and equipment required for the entire process of removing the car tire, including a tire wrench, small hook, jack, etc.; 2. Take out the small hook, hook it into the hole of the screw cap, and then pull it outward to remove the screw cap; 3. Take out the tire wrench, place the specialized tire wrench on the screw, and turn it counterclockwise to loosen all the screws; 4. Take out the jack, locate the support point of the reinforcement on the car chassis, and then use the jack to lift the vehicle; 5. Take out the tire wrench again, remove the previously loosened screws that secure the tire, and then the car tire can be taken off.
16
3
Share

Where are the airbag locations in the Macan?

The airbag locations in the Macan are primarily distributed in three areas: the front of the vehicle (driver and front passenger seats), the sides (front and rear rows), and the roof. These locations are marked with SRS or Airbag labels externally. Many positions in the car are labeled with 'Airbag' or 'SRS,' both of which indicate the presence of airbags. The airbag system is a passive safety protection system that, when used in conjunction with seat belts, provides effective collision protection for occupants. In the event of a car collision, the airbags can reduce head injuries by 25% and facial injuries by approximately 80%.
5
4
Share

What is the correct way to use the one-button start in Volkswagen Sagitar?

Volkswagen Sagitar one-button start correct usage is: First press the start button, after the ACC light turns on, press the start button again, at this time the one-button start will turn green indicating vehicle self-check; After the vehicle completes self-check, depress the brake pedal and press the one-button start once more to start the engine. The Sagitar series is equipped with three engine options: 1.4TSI, 1.8TSI and 1.6L naturally aspirated, providing consumers with more choices. The Sagitar is a spacious A+ class comfort sedan featuring a mature 1.6L naturally aspirated 4-cylinder engine technology with 4 valves per cylinder. Compared to the previous generation's 2 valves per cylinder, this configuration improves both intake and exhaust flow, enhancing low-speed torque and high-speed power output.
9
2
Share

What does the eco indicator on the car dashboard mean?

When the eco indicator appears on the dashboard, it means the vehicle's economy mode is activated. Eco is an English acronym derived from Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active eco driving mode and passive eco driving mode. Eco mode is categorized into active and passive types. The difference lies in the fact that the active type has a dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light turns on, and the vehicle automatically adjusts settings such as throttle opening, transmission shift logic, and air conditioning output power. The passive Eco mode does not have a dedicated button. When the dashboard Eco indicator light turns on, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most vehicles use the active Eco driving mode, which means they have a dedicated switch button. Therefore, you can activate the Eco mode during daily driving. However, it is unnecessary to activate Eco mode when the speed exceeds 120 km/h, during idle parking, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not reflect the fuel-saving characteristics of Eco mode and could also affect the vehicle's power. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 km/h, the system prioritizes speed, causing the Eco mode to automatically deactivate. During idle parking or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not function in such scenarios.
12
2
Share

How does ABS work?

ABS working principle: During braking, ABS can quickly determine the wheel lock-up state based on the speed signals from each wheel speed sensor, close the normally open input solenoid valve on the wheel that starts to lock up, and keep the braking force unchanged. If the wheel continues to lock up, the normally closed output solenoid valve is opened, and the braking pressure on this wheel rapidly decreases due to the direct connection to the brake fluid reservoir pipeline, preventing the wheel from completely locking up due to excessive braking force. ABS is the anti-lock braking system, whose function is to automatically control the magnitude of the brake force during vehicle braking, keeping the wheels from locking up and maintaining a state of rolling while sliding (with a slip ratio of about 20%), ensuring that the adhesion between the wheels and the ground is at its maximum.
4
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.