What to Do When the Outside of Side Windows Fogs Up?

1 Answers
StDiana
07/30/25 7:59am
Don't panic when the outside of side windows fogs up. You can try the following methods: 1. Open windows for air convection: Open both side windows slightly, about a fist-width gap. This creates air convection inside the car, blowing away moisture and quickly dispersing the fog. However, this method is less suitable for winter and rainy days. 2. Use cold air to disperse fog: Turn on the car's air conditioning to cool mode. When cold air blows onto the glass, the fog will quickly disappear. This works because the cold air prevents moisture from condensing on the glass, effectively defogging it. 3. Use warm air method: In winter, direct warm air onto the windshield to rapidly increase its temperature and reduce the temperature difference between the inside and outside of the glass. This can effectively prevent heavy fogging on the windshield.
Was this review help?
14
3
Share
More Forum Discussions

What are the symptoms of overfilling AT transmission fluid?

Overfilling transmission fluid can cause gear shift shocks, automatic transmission fluid leakage, and reduce the cooling function and transmission efficiency of the gearbox. Automatic transmission fluid leakage: If the transmission fluid level is too high, the rotating components will come into contact with the fluid during driving. Under the agitation of high-speed rotating components such as planetary gear mechanisms or clutches, the fluid will expand and boil, causing it to spurt out from the filler hole and vent valve. Since the transmission is located right above the exhaust pipe, fluid dripping onto the exhaust pipe during driving will result in black smoke emerging from the car's skirt, making it appear as if the car is on fire. Reduced cooling function and transmission efficiency: The main functions of transmission fluid are lubrication and cooling. The fluid transfers heat through the transmission housing and transmission cooler. If too much fluid is added, the rotation of gears will encounter greater resistance, reducing the cooling function and transmission efficiency. This requires the engine to consume more fuel, decreasing the vehicle's overall fuel economy. Moreover, this energy loss will be converted into heat inside the transmission, causing the transmission temperature to continuously rise. Ultimately, this leads to premature wear of the bearings and burning of the friction plates inside the transmission. Both replacement and repair are costly. In summary, the fluid level should neither be too high nor too low. During the design phase of the transmission, lubrication and temperature rise tests are conducted, and the fluid level is precisely verified.
17
4
Share

What is the car with three bullet heads called?

The car with three bullet heads is a Buick. Here is the relevant information: 1. The Buick (BUICK) logo features a pattern resembling "three bullets" as its graphic trademark, which serves as the emblem of the Buick division. It is installed on the car's radiator grille. The three bullets in the logo are colored red, white, and blue, arranged at different heights, conveying a sense of striving for progress and continuous advancement. 2. It signifies that the Buick division employs cutting-edge technology, sharp as a blade, and that the talents nurtured by the Buick division are all highly skilled, indomitable warriors who dare to climb peaks. Since 2002, the Buick (BUICK) logo has been updated to a more simplified form.
8
3
Share

Is the Infiniti Q50L Rear-Wheel Drive?

The Infiniti Q50L is rear-wheel drive, featuring a longitudinally mounted engine powering the rear wheels. The Infiniti Q50 is a domestically produced model in China, equipped with a 2.0-liter turbocharged engine across the entire lineup. This engine delivers a maximum power output of 155 kilowatts and a peak torque of 350 Newton-meters, with the maximum power achieved at 5,500 revolutions per minute and the maximum torque available between 1,500 to 3,500 revolutions per minute. It is paired with a 7-speed automatic transmission with manual shift mode. The Infiniti Q50 utilizes a double-wishbone independent suspension at the front and a multi-link independent suspension at the rear. For the imported versions of the Infiniti Q50, two naturally aspirated engines were offered: a 3.5-liter V6 and a 3.7-liter V6 naturally aspirated engine.
13
0
Share

Are Car Refrigerant and Antifreeze the Same?

Not exactly the same. Antifreeze is not completely equivalent to coolant. Coolant is equal to water plus antifreeze. Antifreeze includes coolant, but coolant does not include antifreeze. High-quality coolant can extend the replacement interval. The differences between coolant and antifreeze are as follows: 1. Different applicable seasons: Coolant can be either water or antifreeze, while antifreeze is suitable for all four seasons. Coolant refers to the liquid that can cool down the engine, which can be either water or antifreeze. Water is limited by seasons; antifreeze is suitable for all four seasons, with high quality and guaranteed performance. 2. Different applicable regions: Coolant is suitable for the southern regions, while antifreeze is suitable for the northern regions.
20
3
Share

What Causes a Volkswagen Car to Fail to Start with Abnormal Noises?

Insufficient battery power, starter motor failure, fuel supply system malfunction, and ignition system failure can all cause a Volkswagen car to fail to start and produce abnormal noises. Battery failure or excessive discharge leads to insufficient power, which is inadequate to drive the starter motor. Normally, the starting voltage of the battery should not be lower than 11.45V. If it falls below this voltage, the car will not start properly. You can use a multimeter to check the voltage between the battery terminals and replace the battery if necessary, or use jumper cables to start the car. Starter motor failure prevents it from driving the flywheel to rotate, making it impossible for the engine to start. It is necessary to check whether the starter motor's wiring is properly connected. If there is an internal fault, the starter motor needs to be replaced. Blockages in the low-pressure fuel line, loose or leaking fuel pipes, air in the high-pressure fuel line, clogged fuel injectors, or incorrect fuel injection timing can all cause fuel supply system failure. In such cases, there will be insufficient combustible gas in the cylinders, preventing the engine from starting. It is necessary to visit a repair facility to systematically check whether all components of the fuel supply system are functioning properly. In the ignition system, both the ignition coil and spark plugs are wear-prone parts and typically need to be replaced every 50,000 to 80,000 kilometers. If they have not been replaced for a long time, the insufficient ignition energy will fail to fully ignite the combustible gas mixture in the cylinders, causing the engine to fail to start. It is necessary to check whether the components of the ignition system are functioning properly and replace them if needed.
10
5
Share

What is the maximum wading depth of the Trumpchi GS4?

According to official information, the maximum wading depth of the Trumpchi GS4 is 400mm. Common tire specifications include 225/60R17 and 225/55R18, with a body length of 4545mm, a curb weight of 1480-1540kg, and it is a 5-door, 5-seat SUV. The maximum wading depth refers to the deepest water a vehicle can safely pass through. Generally, the maximum wading depth for sedans does not exceed 30cm, while SUVs can handle slightly deeper water, though it is still advisable not to exceed 50cm. Among common models, the GAC Trumpchi GS8 has a maximum wading depth of 30cm, the Audi A4 has 32cm, the Volkswagen Sagitar has 30cm, the Land Rover Range Rover has 90cm, the Jeep Compass has 48cm, and the Highlander has 45cm. SUVs clearly have a higher maximum wading depth than sedans. Generally, when driving through water, vehicle owners should take different measures depending on the water depth and the vehicle's specifications, as outlined below: If the water reaches the exhaust pipe height, it is relatively safe. Even if water enters the exhaust pipe, the pressure inside is sufficient to expel it. As long as the engine is not turned off in the water, water will not flow back into the vehicle. If the water reaches the door frame height, it becomes more dangerous. Most of the vehicle's circuits, electronic components, and sensors are located at the bottom, which could lead to short circuits, damaging critical electrical components and preventing the car from starting. If the water reaches the air intake height, it is extremely dangerous. Driving into such conditions could cause the engine to stall immediately, leading to permanent damage or rendering the engine unusable.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.