···
Log in / Register

What to Do When the Nissan X-Trail Does Not Detect the Key?

3 Answers
ArielFitz
07/29/25 10:21pm
If the keyless entry system displays "Key not detected," you can place the chip key against the keyless button and then start the ignition, which should generally allow the engine to start. When the vehicle control panel displays "Key not detected," it may indicate that the key battery is dead, and you should promptly replace it with a new large coin cell battery. If the keyless start system fails to activate, it might be because the key is too far from the ignition switch. It is advisable to place the key in the storage slot in front of the center console. For vehicles with keyless start systems, it is essential to protect the key carefully. Avoid frequent dropping, exposure to moisture, or demagnetization to prevent damage.
Was this review help?
1
2
Share
DiPaul
08/15/25 10:58pm
When encountering the issue of the X-Trail not detecting the key, my first thought is that the key battery might be dead. Replacing it with a new one should solve the problem—just buy a coin battery from the store and replace it yourself. Interference is another common cause, such as near cell towers or wireless devices. Try moving farther away or turning off other electronic devices. A weak car battery can also cause system malfunctions, so check if the vehicle battery is aging. Keeping a spare key is always a good habit; inserting it into the designated slot can allow for manual startup. If none of these solutions work, don’t hesitate to visit the 4S店 to check for issues like the antenna receiver. Safety first—don’t delay getting back on the road.
Was this review help?
6
2
Share
Expand All
BethanyLee
10/18/25 2:29am
With more hands-on experience in car repairs, you'll understand better. The Nissan X-Trail key failure was resolved by simply replacing the battery. Purchase a standard model battery and replace it, while also checking if the key buttons are damaged. A weak car battery can cause a chain reaction, so measure the voltage to ensure it doesn't drop below 12 volts. Interference sources like cameras or chargers might disrupt the signal—removing them could restore functionality. Another solution is to reboot the system by disconnecting the car battery's negative terminal for ten minutes before reconnecting. For prevention, regularly test the key's responsiveness instead of waiting for issues to arise, and always carry a spare key for peace of mind and cost savings.
Was this review help?
6
5
Share
Expand All
More Forum Discussions

What is the meaning of the car engine start-stop technology?

The meaning of the car engine start-stop technology is: a system that automatically shuts off the engine when the vehicle needs to temporarily stop during driving and automatically restarts the engine when it is time to move forward again. The method of car start-stop is: 1. When encountering a red light or other reasons to stop while driving, the engine automatically shuts off after stepping on the brake; 2. When starting again, simply release the brake and step on the accelerator or gently turn the steering wheel, and the engine will restart. The principle of the start-stop technology is: when stopping by stepping on the brake and shifting out of gear, the system automatically detects that the engine is idling and not in gear, the speed sensor shows zero, the battery sensor shows there is energy, and the engine automatically stops rotating. When stepping on the clutch, releasing the brake, or turning the steering wheel, the system will quickly start the engine.
9
5
Share

Where to Find the Tire Date?

Tire dates can be found by checking the production batch number on the outer edge of the tire. The production batch number is a combination of numbers and letters indicating the manufacturing month, year, and quantity. Taking 3907 as an example, the tire's production date is the 39th week of 2007, or the latter half of September 2007. The functions of tires are: 1. Supporting the entire weight of the vehicle, bearing the load of the car, and transmitting forces and moments in other directions; 2. Working together with the car suspension to cushion the impact during driving and dampen the resulting vibrations; 3. Preventing severe vibrations and premature damage to car components, adapting to the high-speed performance of the vehicle and reducing driving noise; 4. Transmitting traction and braking torque, ensuring good adhesion between the wheels and the road surface to improve the car's power, braking, and passability.
19
0
Share

What is the suitable engine oil for Hyundai ix35?

Hyundai ix35 is suitable for using original SM grade 5W20 engine oil. Engine oil, also known as engine lubricant, serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption for the engine. The Hyundai ix35 is a compact SUV with body dimensions of 4500 mm in length, 1850 mm in width, and 1715 mm in height, featuring a wheelbase of 2640 mm and a fuel tank capacity of 58 liters. It is equipped with an inline 4-cylinder turbocharged engine, delivering a maximum power of 103 kW at 6000 rpm and a maximum torque of 242 Nm between 1500 to 3200 rpm, paired with a 7-speed dual-clutch transmission.
2
0
Share

When driving a manual transmission car, should you shift gears first or release the handbrake first?

When driving a manual transmission car, you should shift gears first and then release the handbrake. The correct starting procedure for a manual transmission is: 1. Press the clutch pedal completely with your left foot; 2. Shift the gear lever into first gear; 3. Turn on the left turn signal and honk to alert vehicles and pedestrians in front and behind; 4. Release the handbrake and gently lift the clutch with your left foot; 5. Lightly press the accelerator with the ball of your right foot to start moving. The gears of a manual transmission are: 1st, 2nd, 3rd, 4th, 5th, and reverse. The working principle of a manual transmission is: by manually moving the gear lever, the meshing position of the gears inside the transmission is changed, altering the gear ratio to achieve speed variation. For downhill driving with a manual transmission: 1. Generally, use 2nd gear for moderate slopes; 2. Use 3rd gear for slopes greater than 30 degrees; 3. Use 4th or 5th gear when going up or down elevated roads. A manual transmission is a manual gearbox, and its working principle is: by changing the gear ratio of the meshing gears through the shift fork, the driving torque is altered to suit different operating conditions.
15
4
Share

What is the range of the Golf New Energy?

The range of the Golf New Energy is 270 kilometers. The range tested by the Ministry of Industry and Information Technology is measured under relatively ideal conditions, so the actual range may be lower. The Golf New Energy is equipped with a 100 kW electric motor, which has a maximum torque of 290 Nm. The Golf New Energy features front-wheel drive, with a MacPherson independent suspension at the front and a multi-link independent suspension at the rear. The dimensions of the Golf New Energy are 4,270 mm in length, 1,799 mm in width, and 1,482 mm in height, with a wheelbase of 2,631 mm.
4
3
Share

Is the Land Rover Defender a body-on-frame vehicle?

Land Rover Defender is a body-on-frame vehicle. Most family sedans and urban SUVs use unibody construction, where the frame and body are integrated and inseparable. In contrast, body-on-frame vehicles allow complete separation of the frame and body, offering excellent torsional resistance. The Land Rover Defender has body dimensions of 5018mm in length, 1996mm in width, and 1967mm in height, with a wheelbase of 3022mm. The Defender is a hardcore off-road vehicle with three standard features of such vehicles: 1. Equipped with a full-time four-wheel drive system; 2. Uses solid axle suspension; 3. Adopts body-on-frame construction.
18
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.