What to Do When the Nissan Qashqai Trunk Won't Open?

1 Answers
Jasmine
07/29/25 11:45am
If the trunk of your Nissan Qashqai won't open, the solution is to lift the rear seat, enter the trunk, and open the interior panel (some models have pre-drilled holes). Then, manually pull the unlocking lever to release the lock. Methods to open the trunk of a Nissan Qashqai: 1. Ensure that the car doors are unlocked. 2. Pull the trunk release button located below the license plate frame to open the trunk. 3. To close, simply pull the handle and shut it. Daily driving tips regarding the trunk: 1. Develop a habit of checking before driving to ensure the trunk lock is securely engaged. In some accidents, the trunk may suddenly open during driving even though it was locked. 2. If the trunk is left open or slightly ajar, exhaust fumes and other toxic gases may enter the cabin during driving, which is harmful to the driver's health.
Was this review help?
20
3
Share
More Forum Discussions

Location of the BMW 3 Series Outside Temperature Sensor?

The location of the BMW 3 Series outside temperature sensor is at the front left side of the vehicle body. Below is relevant information about temperature sensors: 1. Contact Temperature Sensors: Contact temperature sensors have their detection part in good contact with the measured object, also known as thermometers. Thermometers achieve thermal equilibrium through conduction or convection, allowing the thermometer's reading to directly indicate the temperature of the measured object. Generally, they offer high measurement accuracy. Within a certain temperature measurement range, thermometers can also measure the internal temperature distribution of objects. 2. Non-Contact Temperature Sensors: Their sensitive elements do not come into contact with the measured object, also known as non-contact temperature measurement instruments. These instruments can be used to measure the surface temperature of moving objects, small targets, objects with small heat capacity, or objects with rapidly changing (transient) temperatures, as well as the temperature distribution of temperature fields. The advantage of non-contact temperature measurement is that the upper measurement limit is not restricted by the temperature resistance of the sensing element, so in principle, there is no limit to the highest measurable temperature. For temperatures above 1800°C, non-contact temperature measurement methods are primarily used. With the development of infrared technology, radiation temperature measurement has gradually expanded from visible light to infrared, covering temperatures below 700°C down to room temperature, with high resolution.
19
2
Share

Which is better, the BMW 3 Series 320Li or 325i?

The BMW 3 Series 325i is better. Here are the differences between the BMW 3 Series 320Li and 325i: 1. Power: The 320 is equipped with a low-power version, with a maximum horsepower of 156Ps, while the 325 model features a mid-power version, with a maximum horsepower of 184Ps. Additionally, the 3 Series also offers a 330 version, which is equipped with a high-power 2.0T engine, delivering a maximum horsepower of 258Ps. All three powertrains are paired with ZF's 8-speed automatic transmission. 2. Features: In terms of driver assistance systems, the 325 has additional features like an active braking system and cruise control compared to the 320. For the accessory systems, the 325's multimedia system supports navigation, voice-controlled air conditioning, and car connectivity. The 325 also comes with an 11-color ambient lighting system.
5
3
Share

How to Adjust Manual Rearview Mirrors?

Here are the methods for adjusting rearview mirrors: 1. For the right-side mirror when adjusting the up and down position: The ground area should be larger, occupying about 2/3 of the mirror surface, while the left and right positions should be adjusted so that the car body occupies 1/4 of the area. 2. When adjusting the left-side mirror: The up and down position should place the distant horizon in the center, and the left and right positions should be adjusted so that the car body occupies 1/4 of the mirror surface. 3. When driving on multi-lane roads: Vehicles frequently change lanes, so it is essential to accurately observe the traffic conditions behind and to the side through the rearview mirrors at all times. If there is a vehicle approaching from behind, do not change lanes. If a vehicle is overtaking from the side or behind, temporarily refrain from overtaking the vehicle ahead.
16
0
Share

Has the RAV4 engine oil emulsification issue been resolved?

Regarding the phenomena of oil dilution and emulsification, the manufacturer has not provided any substantial solutions. Below is relevant information about the RAV4: 1. Introduction: The Toyota RAV4 is the base model in Toyota's compact multipurpose off-road vehicle family. Its name comes from the abbreviation of "Recreational Active Vehicle with 4-wheel drive," meaning "four-wheel-drive recreational sports vehicle." 2. Models: It features a completely new exterior and interior design style, with the overall styling further evolving towards an urban SUV, while off-road characteristics have gradually receded from this model. 3. Positioning: The RAV4 offers high quality and performance while ensuring driving comfort and excellent off-road capability, allowing it to adapt freely to both ONROAD and OFFROAD conditions to meet diverse lifestyle needs.
12
0
Share

What brand of engine oil does BMW use?

The dedicated engine oil for BMW vehicles is Castrol's Edge series with a viscosity rating of 5W30. For later maintenance, you may consider switching to Shell, Mobil, or other brands. BMW typically uses engine oil models such as 5W30, and BMW 4S stores also provide 5W40, 0W40, and 0W30 models. The original BMW engine oil is LongLife-01, a product developed in collaboration with Shell, featuring Shell's unique PurePlus technology. The BMW 5 Series generally uses 5W30 engine oil; for models like the BMW 1 Series, 2 Series, 3 Series, and X1, the official recommendation is SAE-5W-30 and higher-grade SAE-0W-40. As long as the oil meets BMW's Longlife certification (common certifications include BMW-Longlife-98, BMW-Longlife-01, and BMW-Longlife-04), it can be used. Generally, meeting BMW-Longlife-01 is sufficient. The viscosity of engine oil changes with temperature, so special attention is needed to its performance under low and high temperatures. For example, in 5W-30, the first number indicates low-temperature fluidity, with 5W representing the ability to withstand temperatures as low as -30°C. The smaller this number, the better the low-temperature fluidity, ensuring smoother cold starts. The latter number represents the oil's kinematic viscosity at 100°C, with higher values indicating better viscosity retention at high temperatures, which can be interpreted as superior lubrication performance under high-temperature conditions. The method for changing engine oil in BMW vehicles is as follows: Wait for the engine temperature to drop, allowing the oil to flow back into the oil pan; Loosen the oil drain plug with a wrench and collect the old oil in a container until no more oil flows out. Start the engine for about 30 seconds to allow oil in the main oil passages to drain; Remove the oil filter with a specialized wrench; Apply oil to the seal of the new oil filter and tighten it clockwise by hand; Add new oil through the oil filler cap on the engine valve cover, typically filling up to three-quarters of the oil container; Run the engine for 5 minutes and check for leaks around the oil drain plug and oil filter. If leaks are found, perform necessary repairs; After stopping the engine, pull out the oil dipstick to ensure the oil level is within the standard range.
1
1
Share

Can You Lock the Car During BMW iDrive System Upgrade?

You can lock the car during a BMW iDrive system upgrade. Here are detailed points about BMW: 1. Vehicle Models: BMW is a German automotive brand under the BMW Group. As one of Germany's three major luxury car brands, BMW holds significant market share and brand recognition in China's new car market, while also offering certified pre-owned vehicle services in the used car sector. 2. Definition: The vehicle multifunction upgrade control system utilizes host computer technology to enhance car functionalities while preserving all original features, thereby upgrading the vehicle's configuration.
13
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.