What to Do When the Navigation Reverse Camera Does Not Display?

1 Answers
DelCollin
07/29/25 4:13pm
The solutions for a navigation reverse camera not displaying are: 1. Replace the camera video cable; 2. Install a voltage-stabilizing relay; 3. Enter the navigation settings and check if the reverse function is turned off. The reverse camera is a safety assist device for parking and reversing, which informs the driver of surrounding obstacles through visual display, helping to eliminate blind spots and unclear vision, thereby improving driving safety. Notes for navigation reverse camera usage: 1. Do not rely entirely on the reverse camera system for reversing; consider it as an auxiliary tool; 2. The vehicle display must be correctly connected, find the corresponding video cable or install a video switching device to ensure normal display of the rear view; 3. Avoid directly connecting vehicle electrical appliances to the car battery power source to prevent unstable power supply.
Was this review help?
20
5
Share
More Forum Discussions

What Causes Sudden Spontaneous Breakage of Car Glass?

Reasons for sudden spontaneous breakage of car glass: 1. Quality issues with the glass itself: Car glass is tempered glass, which has excellent impact resistance and bending strength and is less likely to cause injury when broken. However, spontaneous breakage can occur. According to national standards, there is a possibility of three per thousand spontaneous breakages per square meter. 2. Uneven heating and cooling of the glass: When there is excessive variation in temperature, stress deformation can occur in the glass, leading to breakage. 3. Poor-quality or improperly applied window film: Low-quality films often contain excessive amounts of absorbers, causing all the heat to be absorbed by the glass, which raises the glass temperature and increases the likelihood of spontaneous breakage.
3
3
Share

What is the normal millivolt range for an oxygen sensor?

The oxygen sensor operates normally within a voltage range of 0.1 to 0.9 millivolts. The fluctuation amplitude of the rear oxygen sensor is typically smaller than that of the front one. The specific values may vary depending on the brand, model, year, and emission requirements of the vehicle. A faster voltage frequency change indicates a better-performing sensor. If the voltage reads 0 millivolts or 1 millivolt, or shows no variation, it suggests severe aging of the oxygen sensor, necessitating immediate replacement. Under normal conditions, the front oxygen sensor's signal should be higher than that of the rear sensor. If both sensors detect identical oxygen concentration data, it indicates failure of the three-way catalytic converter.
13
1
Share

What does 94V on a tire mean?

94V on a tire refers to the load index of the tire, where V represents the speed rating of the tire. The speed rating indicates the maximum speed at which the tire can carry a specified load under specified conditions. A load index of 94 means the tire has a maximum load capacity of 670kg, and the maximum speed is 240km/h. Based on different maximum speeds, tire speed ratings can be divided into many different levels from A to Z, with level A further subdivided into eight different levels from A1 to A8. Generally, the further back the letter representing the tire speed rating is in the alphabet, the better the tire's performance.
10
3
Share

What are the color options available for the entire Hongqi H5 lineup?

The Hongqi H5 lineup offers four color options: Qingchuan Blue, Polar Night Black, Pearl White, and Platinum Gold. The Hongqi H5 is a mid-size sedan that largely follows the design of the Hongqi B-Concept, featuring an inverted trapezoidal front grille connected to the headlights with vertical chrome trim accents. Under the hood, the Hongqi H5 is powered by a 178-horsepower 1.8-liter turbocharged engine, delivering a maximum power of 13 kW and a peak torque of 250 Nm, paired with a 6-speed automatic transmission. The vehicle is equipped with a MacPherson independent front suspension and a multi-link independent rear suspension.
10
5
Share

Where is the engine number located on the Hyundai Sonata?

Hyundai Sonata's engine number is located on the engine block. An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (reciprocating piston engines), external combustion engines (Stirling engines, steam engines, etc.), jet engines, and electric motors. The Sonata is a mid-size sedan with a body length of 4747mm, width of 1820mm, and height of 1440mm. It offers two engine options: a 2.0L inline-4 and a 2.7L V6. The 2.0L inline-4 cylinder engine belongs to Hyundai's B-series engines, capable of producing 137 horsepower and 180 Nm of torque. Paired with a 4-speed automatic transmission, it effortlessly propels the 1.4-ton vehicle body.
7
1
Share

Does the Volkswagen Magotan have independent suspension?

The Volkswagen Magotan features independent suspension. The front suspension of the Magotan utilizes a MacPherson strut independent suspension, while the rear suspension employs a multi-link independent suspension. This type of rear suspension aligns well with the vehicle's positioning. The multi-link independent suspension consists of links, shock absorbers, and damping springs. The Volkswagen Magotan is a B-segment sedan with body dimensions of 4866mm in length, 1832mm in width, and 1464mm in height, with a wheelbase of 2812mm. The car is equipped with three engine options: a 1.4-liter turbocharged engine, a low-power version 2.0-liter turbocharged engine, and a high-power version 2.0-liter turbocharged engine. All three engines are paired with a 7-speed dual-clutch transmission.
15
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.