What to Do When the Motorcycle Speedometer Doesn't Display Speed?

1 Answers
AdalynnLynn
07/30/25 6:57am
Here are the solutions for when the motorcycle speedometer doesn't display speed: 1. Remove the speed cable fixing nut below the speedometer and pull out the speed cable. Then lift the front wheel and rotate it to see if the speed cable rotates along with it. If it rotates, it indicates a problem with the dial, possibly due to a broken or loose reduction gear inside the dial. Since there are no separate speedometer dials available for sale, the entire assembly must be replaced. If it doesn't rotate, it means the speed cable may be broken or the counting claws inside the front axle are excessively worn, and it should be repaired at an after-sales service center. 2. Open the front handle cover (headlight cover). If the screw cap at the speedometer's port is loose or missing, tighten it.
Was this review help?
1
4
Share
More Forum Discussions

What is a Maybach car?

Maybach is a sub-brand under Mercedes-Benz, with models including Maybach Zeppelin, Maybach Landaulet, Maybach Exelero, Maybach 62S, and Maybach armored version. Maybach is a full-size luxury sedan with a 4-door, 5-seat configuration. Its dimensions are 5466mm in length, 1899mm in width, and 1500mm in height, with a wheelbase of 3365mm. The Maybach is powered by a 6-cylinder 3.0T turbocharged engine producing 367 horsepower, paired with a 9-speed automatic transmission. Both front and rear suspensions use double-wishbone independent suspension systems.
10
1
Share

What are the effects of insufficient coolant on a vehicle?

Insufficient coolant can lead to excessively high engine temperatures in a vehicle, which may easily cause engine damage. Automotive coolant, also known as antifreeze coolant, is a liquid that cools down the engine when it overheats, while also providing antifreeze, anti-corrosion, anti-rust, and anti-scale functions. The proper operation of a vehicle's cooling system is essential to ensure the normal functioning of the engine, and any faults related to the coolant system should not be overlooked. It is crucial to replenish the coolant promptly when it is insufficient. Prolonged lack of coolant can result in poor heat dissipation in the cooling system, causing the engine to overheat. In severe cases, this can lead to cylinder head deformation, piston scuffing, and even engine failure.
4
0
Share

What Lights Should Be Used When Driving at Night in the City?

When driving at night in the city, you should turn on the width marker lights and low beam headlights. If the lighting is insufficient or there are few oncoming vehicles, you can also use high beam headlights. However, it is important to note that when encountering oncoming traffic, you must switch from high beam to low beam to avoid affecting the visibility of oncoming vehicles and creating safety hazards. Width marker lights do not have a separate switch; they are automatically activated when the low beam headlights are turned on. As long as the low beam is on, the width marker lights will also be on. Width marker lights are suitable for use in low-visibility conditions such as dusk, twilight, rainy weather, dawn, rain fog, and haze. Additionally, if you encounter foggy conditions, you should also turn on the front and rear fog lights. When visibility on the highway is less than 100 meters, the speed should not exceed 40 kilometers per hour, and you should turn on the front and rear fog lights, low beam headlights, and marker lights, while maintaining a distance of more than 50 meters from the vehicle in front in the same lane.
15
3
Share

How to Handle a Malfunctioning Parking Sensor?

Methods to address parking sensor malfunctions: 1. Replace the buzzer of the parking sensor itself; 2. Repair the wiring of the parking sensor. After a parking sensor failure, the owner can check whether the power cable of the main unit is properly connected and if there is current, and inspect whether the radar main unit wiring has become loose. If neither of these is the issue, the problem may lie with the radar itself—either the parking sensor's buzzer is damaged or the wiring was harmed during recent modifications. The full name of the parking sensor is reverse parking collision avoidance radar, also known as a parking assist device. It is a safety aid for parking or reversing a car, consisting of ultrasonic sensors, a controller, and a display, among other components. It informs the driver about surrounding obstacles through sound or a more intuitive display, alleviating the hassle of checking all around when parking, reversing, or starting the vehicle. It also helps eliminate blind spots and unclear vision, enhancing driving safety.
1
5
Share

What is the tutorial for replacing coolant in the X-Trail?

X-Trail coolant replacement tutorial: 1. Locate the coolant drain screw, which is positioned right in the center of the bumper, and loosen it with a Phillips screwdriver; 2. After all the coolant has drained, you can add distilled water at the coolant filler port to flush the cooling system, rinsing out any residual coolant, then use an air gun to blow out excess moisture; 3. Tighten the coolant drain screw, add new coolant at the filler port until the level is between max and min, then start the engine to purge air. During this process, the coolant level will drop, so be sure to top it up promptly; 4. When the cooling fan starts running, it indicates the engine has reached normal operating temperature. At this point, if the coolant level is between max and min, you can close the coolant filler cap. The X-Trail is a compact SUV with a 5-door, 5-seat body structure. Its dimensions are 4675mm in length, 1820mm in width, and 1722mm in height, with a wheelbase of 2706mm.
16
2
Share

Is It Safe to Install a Neck Pillow in a Car?

Installing a neck pillow in a car is not safe. The space where the pillow is placed is actually designed to protect the driver's head in the event of a collision. If there is any protruding object like a neck pillow in this area, it could cause a fatal fracture to the cervical spine. Not placing a neck pillow is also a measure to ensure the safety of the driver's cervical spine. Vehicles equipped with active head restraints, or mechanical active headrests, move the headrest forward during a rear-end collision, reducing the distance between the head and the headrest. This limits the relative displacement of the shoulders and head during a collision, significantly reducing the probability of cervical spine injuries. Adding a neck pillow alters the relative position of the head and shoulders and is often too soft to restrict cervical spine movement during a collision, potentially leading to severe injuries. Moreover, since neck pillows are often fixedly connected to seat covers, they may also restrict the mechanical movement of active head restraints.
18
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.