What to Do When the Mercedes-Benz Hold Function Doesn't Engage?

How to Read an Automatic Transmission Dipstick?

Here are the steps to check the automatic transmission dipstick: 1. If the automatic transmission is cold, the fluid level should be near the lower mark on the dipstick. 2. If the automatic transmission is hot, the fluid level should be near the upper mark on the dipstick. Below is some related information: 1. In automobiles, the dipstick is a commonly used measuring tool to check the level of lubricating oil in the reservoir. Due to the curved path of the dipstick tube, the dipstick must be able to flex when inserted and return to its original shape when removed. 2. The function of the oil dipstick is to measure the static level of the engine oil, thereby indicating whether the engine oil level is within the proper range. 3. Standard oil dipsticks will have clear upper and lower limits, and it is sufficient to ensure that the measured oil level falls between these two marks.

4

5

Share

Does the New Emgrand from Geely Have Anti-Collision Beams?

The Emgrand is equipped with 4mm thick steel anti-collision beams both at the front and rear, offering a high safety coefficient. This configuration is quite generous compared to other vehicles in its class. More details are as follows: 1. The significance of front and rear anti-collision beams lies in their role as the first line of defense against impact forces in a vehicle. A key concept in passive safety is the distribution of impact forces throughout the entire body. If only the impacted area absorbs the force, the protective effect would be minimal. 2. When force is applied at a single point, distributing it across the entire frame structure can significantly reduce the intensity of the force at that point. The front and rear anti-collision beams play a crucial role in this process. 3. The ends of the anti-collision beams are connected to low-speed energy absorption boxes with very low yield strength, which are then bolted to the vehicle's longitudinal beams. These energy absorption boxes effectively absorb collision energy during low-speed impacts, minimizing damage to the longitudinal beams and reducing repair costs. The bolted connection also allows for easier replacement of the anti-collision beams.

20

1

Share

How to Use the Cruise Control in Hyundai Elantra?

The operation method of the cruise control buttons in Hyundai Elantra is as follows: 1. Press the CANCEL button to deactivate the cruise control. To resume cruise control, press the RES button. 2. The cruise control function can only be activated after setting the speed via the SET button. Without setting, the cruise control function will not be enabled. (Note: The cruise control function can only be used at speeds above 30km/h.) 3. The +/- buttons are used to adjust the cruise control speed, with + for increasing and - for decreasing speed. The autonomous driving system mainly includes the Lane Keeping Assist System and Adaptive Cruise Control. Compared to the warning system, the Lane Keeping Assist System adds control over the braking mechanism. When the vehicle deviates from the lane and shows a tendency to cross the line, the system intervenes and applies the brakes with a warning. Adaptive Cruise Control intelligently adjusts the vehicle's speed, stopping when the vehicle in front stops and starting when the vehicle in front starts.

8

2

Share

Where are the drainage points of the Volkswagen Sagitar doors located?

The drainage outlets of the Volkswagen Sagitar are located at the bottom of the doors. Here are the specific details about the Sagitar's drainage outlets: 1. The drainage outlets of the Volkswagen Sagitar are located at the bottom of the doors: By removing the rubber strip at the bottom of the door, you can see the drainage outlets. These outlets effectively drain rainwater out of the car, maintaining a dry environment inside. 2. Due to their low position: Vehicles frequently driven on muddy roads may find these drainage outlets easily clogged with mud. It's important to check them during car maintenance. If water accumulates inside the door, it can lead to corrosion, and significant water ingress may damage components like the window regulator and audio system. 3. If the drainage outlets become blocked: You can use a wire or other hard object to unclog them. Be careful during cleaning to avoid damaging the door seals.

13

2

Share

What is the lifespan of a three-way catalytic converter?

The lifespan of a three-way catalytic converter under domestic standards is approximately 80,000 to 100,000 kilometers of vehicle travel, while abroad it is generally 160,000 to 200,000 kilometers. More relevant information is as follows: 1. The three-way catalytic converter is the most important external purification device installed in the vehicle's exhaust system. It converts harmful gases such as CO, HC, and NOx emitted from vehicle exhaust into harmless carbon dioxide, water, and nitrogen through oxidation and reduction. 2. The failure mode of the three-way catalytic converter is high-temperature deactivation: After the active components sinter at high temperatures, the Al2O3 in the coating converts into Al2O3, which only causes the catalyst in the converter to fail and does not affect the exhaust resistance. Therefore, many times the vehicle owner will not notice until measuring exhaust emissions or during vehicle inspection.

8

1

Share

How to check the oil level in a 2017 A4L?

A4L does not have a dipstick. You can check it through the MMI display by pressing the car button and selecting the oil level. The conditions for checking are as follows: 1. The engine oil temperature must reach above 60 degrees (i.e., after running the car for more than 10 minutes). Turn off the engine, wait for 1 minute, then turn on the ignition to see it. On the display screen, press CAR to view. 2. If the vehicle is low on oil, an oil can-like icon will appear on the dashboard. If this icon does not appear during normal driving, it means no oil needs to be added. When adding oil, ensure the proper amount is used.

3

Share

What to Do When the Mercedes-Benz Hold Function Doesn't Engage?

How to Read an Automatic Transmission Dipstick?

Does the New Emgrand from Geely Have Anti-Collision Beams?

How to Use the Cruise Control in Hyundai Elantra?

Where are the drainage points of the Volkswagen Sagitar doors located?

What is the lifespan of a three-way catalytic converter?

How to check the oil level in a 2017 A4L?

How Many Cylinders Does the Porsche 911 Engine Have?

Where is the cabin air filter located in a Ford Mondeo?

What are the differences between imported and domestically produced Mercedes-Benz?

Where is the turn signal switch located inside the car?