What to Do When the Mercedes-Benz E300 Key is Locked in the Car?

1 Answers
Pat
07/30/25 1:05am
To open the driver's door, pull the door handle firmly. At this point, the opening of the door handle will be slightly larger than usual. Pull the cover out of the opening. Insert the emergency key into the built-in slot, then turn it left or right to the stop position. When the car has no power, you can pull the door opening handle inside the car past the noticeable resistance point once to unlock the door first.
Was this review help?
16
2
Share
More Forum Discussions

Is Engine Electronic Anti-Theft Useful?

Engine electronic anti-theft is useful. Relevant information is as follows: 1. Definition: Engine electronic anti-theft is a security system installed for the engine, commonly referred to as the engine immobilizer system. For vehicles equipped with this system, even if a thief can open the car door, they cannot drive the car away. 2. Principle: The engine immobilizer system was developed based on the general VATS (Vehicle Anti-Theft System) and inherits the VATS concept in terms of anti-theft principles. It works by matching the password in the key's chip with the password in the ignition switch to control the engine's start, thereby achieving the anti-theft purpose. This function plays a significant role in vehicle security. Without engine anti-theft, someone who breaks into your car can start it by hot-wiring and drive it away.
19
1
Share

What Causes the Key Light on the Dashboard to Flash?

When the key light on the car dashboard illuminates, it indicates that the car cannot detect the key. Possible causes include a malfunction in the key's transmitter module or a dead battery in the key. Malfunction in the key's transmitter module: Promptly inspect the internal wiring and perform necessary repairs. Dead battery in the key: Replace the battery immediately. Steps to replace the car key battery: Press the button on the back of the key to remove the mechanical key. Use an appropriate tool to remove the battery cover, revealing the battery. Remove the key battery for replacement. Avoid touching the internal circuits and electronic contacts, as this may cause malfunctions. Instead, hold the battery by its edges. Grabbing the battery across the contacts can significantly reduce its stored charge. When installing the new battery, ensure the positive side faces the bottom of the casing. Then, close the cover and test the key's functionality by pressing the buttons.
20
1
Share

What are the differences between sedans and SUVs?

1. Different Ground Clearance: Vehicles traveling on highways generally move at higher speeds, making visibility a crucial factor. Due to their higher ground clearance and open design, SUVs offer a better field of vision compared to sedans. This allows SUV drivers to assess road conditions ahead more effectively, potentially making them slightly safer in this regard. 2. Different Handling: In terms of handling, sedans tend to outperform SUVs. For long-distance or extended driving periods, sedans are noticeably more comfortable. They require less steering effort at high speeds and handle turns more easily. SUVs, with their larger body size and higher center of gravity, generally can't match the handling performance of sedans. 3. Different Fuel Consumption: Fuel consumption primarily depends on engine power. With the same engine displacement, SUVs tend to consume more fuel than sedans. This is mainly because, at high speeds, a significant portion of an SUV's fuel is used to overcome air resistance. Generally, vehicles with more aerodynamic designs consume less fuel. Due to their inherent body design, SUVs typically have higher fuel consumption.
3
5
Share

How to Check the Production Date on a Car?

The methods to check a car's production date are as follows: 1. The nameplate in the engine compartment. Inside the engine compartment, there is usually an aluminum nameplate that displays the car's serial number, engine displacement, model, brand, and importantly, the specific production date. 2. The small nameplate around the door seam. In addition to the nameplate in the engine compartment, there is also a small nameplate around the driver's or passenger's door seam, which clearly states the car's brand, model, production date, etc. 3. The VIN (Vehicle Identification Number) under the windshield. Generally, there is a VIN under the front windshield of a car. The 10th digit of the VIN represents the production date of the car. Each vehicle has a unique VIN, but the production date can always be found. 4. The instruction manual provided when purchasing the car. Usually, the car's instruction manual explicitly states the production date of the car.
3
1
Share

What are the function keys of a dash cam?

The function keys of a dash cam include (Down Key), (Up Key), M or MENU (Menu Key), OK (Confirm Key), and MODE (Mode Key). Here is more related information: 1. Installation position of the dash cam: It should be placed where it does not obstruct the driver's view. It is recommended to install it behind the rearview mirror or slightly to the right of the rearview mirror. 2. Power supply methods: Power can be obtained through the cigarette lighter or the fuse box. Another method is to draw power from the reading light, but this is quite difficult to operate and is not user-friendly for most car owners. 3. Wiring: Try to conceal the wiring as much as possible. First, tuck the wire along the gap of the roof lining. Don't worry about it not fitting—the interior roof lining of the vehicle is flexible. If it really doesn't fit, you can gently pry it open with your hand to insert the wire.
2
4
Share

How to Remove the Wiper Blades on a Trumpchi GS4?

Here are the steps to remove the wiper blades on a Trumpchi GS4: 1. First, fully lift the wiper arm. To avoid damaging the windshield during the removal process, it is recommended to place a cloth on the windshield. Adjust the angle of the wiper blade. 2. Next, change the angle of the wiper blade, preferably to a 90-degree angle relative to the wiper arm. Since the wiper blade is secured to the arm with a clip, positioning it at this angle makes removal easier. 3. Once properly angled, begin the removal process. Use one hand to lift the rubber blade, exposing the fixing hook between the wiper arm and the blade. Then, with one hand, pull the rubber blade sideways while pressing down firmly on the main bracket with the other hand to separate the wiper blade from the arm. After this, the entire wiper blade can be removed.
17
5
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.