What to Do When the Malibu XL Center Console Screen Doesn't Light Up?

2 Answers
DeViolet
07/29/25 8:16pm
Solutions for the Malibu XL center console screen not lighting up: 1. First, check whether the power supply to the display screen is normal. If the power supply is abnormal, replace the power supply module. 2. Then, check whether the ribbon cable connection is good. If there is a problem, replace the ribbon cable. 3. Check whether the display screen is damaged. Replace the display screen for testing. If it returns to normal, the display screen is damaged. 4. If the power supply is normal and the ribbon cable connection is good, check the video output signal of the motherboard and replace the motherboard for testing. The following is an introduction to the car center console: The car center console is the place where comfort and entertainment devices such as car air conditioning and audio are controlled. The car center console includes the central control door lock system, and the driver can control the switch of the whole car door and the window lifting system through the car center console.
Was this review help?
11
3
Share
TylerMarie
08/14/25 4:41pm
Last time I drove my friend's Malibu XL, I also encountered a completely black screen issue. Don't panic first, this kind of problem can mostly be solved by yourself. Try holding down the volume knob to reboot the infotainment system, waiting for more than 15 seconds to let the system restart completely. Pay attention to whether the air conditioning buttons have backlighting when driving normally. If the buttons are lit but the screen remains dark, it's most likely a loose power supply connection or a blown fuse. Remember that the fuse box for the infotainment system is hidden behind the glove compartment - check the manual for fuses labeled 'Radio' or 'Infotainment'. If both rebooting and fuse checks show no issues, the motherboard of the infotainment system might be faulty, in which case you'll need to visit the dealership to read the error codes with their computer. By the way, the probability of screen crashes increases after exposure to high temperatures in summer, so try to park in shaded areas whenever possible.
Was this review help?
6
4
Share
Expand All
More Forum Discussions

What to Do When the Rearview Mirror of a Corolla Becomes Blurry After Rain?

Electrically heated rearview mirrors work by heating the wires embedded behind the mirror, gradually raising the mirror surface temperature to over 40°C to accelerate the evaporation of moisture on the mirror. Rain deflectors are suitable for use when the rain is not too heavy, but their effectiveness significantly diminishes during heavy rain, ensuring only about one-third of the rearview mirror remains clear. When a glass treated with a water repellent gets wet, small water droplets form into round beads that can easily roll off the rearview mirror with a slight shake or breeze.
12
5
Share

What brand is Boto tires?

Boto is a brand under Wan Da Bao Tong Tires. It is one of the first Chinese enterprises to pass third-party certification. Its products have obtained certifications such as 3C compulsory certification, ISO9001, and DOT. Boto tires are not only sold domestically but also exported to 130 countries and regions including the United States, Europe, and Asia. When using Boto tires daily, pay attention to the following points: Regularly inspect the tire surface for cracks, deformations, or other defects. Due to driving wear, the tread grooves gradually become shallower. If the tread wears flat, it will lose its drainage and anti-slip functions, significantly reducing the vehicle's performance. Small cracks may also pose a risk of tire blowouts at high speeds. Additionally, promptly remove pebbles stuck in the grooves. Park on level ground whenever possible. Avoid parking on roads with thick, sharp, or pointed stones. Do not park near or in contact with petroleum products, acids, or other materials that may degrade rubber. After parking, avoid turning the steering wheel, as this accelerates tire wear. Do not use water to cool overheated tires. In hot weather or during high-speed driving, tires tend to overheat, and the pressure increases. In such cases, stop to let the tires cool naturally. Never release air to reduce pressure or splash water to cool them, as this may cause abnormal aging of the tread rubber. Avoid sudden braking. Try to minimize frequent and hard braking to prevent accelerated tread wear caused by dragging between the tires and the road surface.
4
5
Share

Should You Engage the Handbrake or Shift to Neutral First When Waiting at a Red Light?

When waiting at a red light, you should engage the handbrake first. Below is a detailed introduction about car braking: 1. Braking: Braking, also known as deceleration, refers to the action of stopping or reducing the speed of moving locomotives, vehicles, other transportation tools, or machinery. The braking device is a mechanical deceleration device that slows down the vehicle, also known as a decelerator. 2. Braking System: The braking system consists of the control system, hydraulic system, and power assist system. The control system includes the pedal, handbrake, etc. The hydraulic system is composed of hydraulic oil, brake pump, and hydraulic oil pipes. The power assist system is the vacuum booster pump. The electronic control system consists of the ABS pump, ABS sensors, and ABS computer. The execution system includes the brake caliper, brake pads, and brake disc.
1
4
Share

How to determine if the car body is straight in Subject 2?

If your line of sight is parallel to the lane edge line, the car body is straight. If your line of sight intersects with the lane edge line, adjust the car body in the opposite direction. If you feel you are in the center of the road, the car is also in the center of the road, and at this time, the car is definitely straight. When driving, you should not only look ahead but also check the side mirrors. On roads with markings, you can observe whether the vehicle is driving in the middle through the side mirrors. You can check if the windshield washer nozzles at the front of the car are aligned with your line of sight or choose a reference object to compare with the car body to see if the car is straight.
10
0
Share

What to Do If the Car Frequently Stalls During the Hill Start in Subject 2?

At the moment of stopping at the designated point, press both the clutch and brake simultaneously. Immediately pull up the handbrake and hold it for more than 4 seconds to ensure the car stops stably and effectively prevent stalling. The more proficient you become, the easier it is to lift the clutch too quickly. If the car didn't stall before but suddenly starts stalling later, it might be because the clutch is being released too quickly. Lift it slowly and hold it steady after reaching the semi-engaged state. When the car reaches the semi-engaged state by releasing the clutch, be sure to release the brake promptly. Delaying too long may cause the car to stall. After feeling the car shake, gently release the brake.
8
1
Share

How to Check the Production Year of Tires?

Observe the DOT marking. Here are the specific details: Observe the DOT marking: The last four digits of the marking indicate the production date, consisting of four digits AABB. The first two digits AA represent the week of the year, and the last two digits BB represent the year. Introduction to bias-ply tires: From a design perspective, bias-ply tires have many limitations, such as accelerated tread wear due to friction between the cross plies, and the ply arrangement does not provide good control. Introduction to radial tires: Radial tires have steel belts with better flexibility, adapting to irregular road impacts and offering long-lasting durability. Their fabric structure results in a longer tire lifespan.
12
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.