What to Do When the Magotan Won't Move and the Gear Indicator Flashes?

1 Answers
JasperLee
07/30/25 6:45am
The solutions for the Magotan not moving and the gear indicator flashing are: 1. Determine if the transmission has been disassembled. If it has, first adjust the transmission shift cable to the standard setting and then test drive to see if the issue is resolved; 2. Use a fault diagnostic tool to check if there are any fault codes in the transmission. If fault codes exist, identify which component they refer to and replace it to solve the problem. The Magotan has a body length, width, and height of 4866mm, 1832mm, and 1464mm respectively, with a wheelbase of 2812mm. Its bold V-shaped front grille exudes stability and grandeur, complemented by dynamic and stylish streamlined body lines. The innovative design concept is highlighted by the compound fish-eye-type adaptive turning bi-xenon headlights, showcasing an aura of intelligence and composure.
Was this review help?
7
5
Share
More Forum Discussions

Can the car door be opened from the inside when locked?

When the car door is locked, it can still be opened from the inside. In most cars, you can unlock it by pulling the door lock lever above the handle. Below is additional information on car door lock maintenance: 1. Keep the door locks dry: Try to avoid exposing car door locks to rain, as the small springs inside can rust, leading to reduced flexibility. 2. Lubrication maintenance: If the car key becomes difficult to use or feels stiff, apply some lubricant. If the door lock is hard to operate, spray lubricant on the latch to ensure smoother movement of the lock mechanism. 3. Store locks separately: Car locks should be stored separately and not mixed with other keys to prevent excessive wear on the lock cylinder due to the weight of multiple keys.
9
0
Share

What is the name of the kapsen tire?

kapsen is the name of the Compass tire. The functions of car tires are: 1. To support the entire weight of the vehicle, bear the load of the car, and transmit directional forces and moments; 2. To work together with the car's suspension to mitigate the impacts encountered during driving and dampen the resulting vibrations; 3. To protect the car's components from severe vibrations and premature damage, adapt to the vehicle's high-speed performance, and reduce driving noise; 4. To transmit traction and braking torque, ensure good adhesion between the wheels and the road surface, and improve the car's power, braking, and passability.
7
3
Share

How to Identify If the Mileage of a Used Car Has Been Tampered With?

Methods to identify if the mileage of a used car has been tampered with include: 1. Check the wear and tear on the accelerator pedal, clutch pedal, and brake pedal, which can generally indicate the vehicle's mileage. If the tread patterns are completely worn out, the mileage is likely over 100,000 kilometers; 2. Inspect the vehicle's OBD port for looseness or signs of use; 3. Visit a same-brand 4S dealership to look up the vehicle's last maintenance record, comparing the recorded mileage during maintenance with the condition at the time of transaction for any obvious discrepancies; 4. For vehicles that have passed the warranty period, you can check with the insurance company, as the insurance policy may also contain some mileage records.
8
4
Share

How to Determine the Position of the Right Front Wheel?

Methods to determine the position of the right front wheel are: 1. When the car is moving straight, hold the steering wheel at the 10 and 2 o'clock positions, observe the visible ground near the front of the car, and the position of your right thumb indicates the location of the right front wheel; 2. From the driver's seat inside the car, look at the one-third point from the right side of the car's front, and the placement point of the right wiper marks the position of the right front wheel. Safe driving methods include: 1. Check the vehicle's condition to avoid driving with potential hazards; 2. Fasten the seatbelt to enhance safety awareness; 3. Avoid driving while fatigued; 4. Do not drive under the influence of alcohol; 5. Pay attention to road conditions in bad weather; 6. Handle any unexpected situations on the road properly; 7. Follow traffic rules and avoid rushing.
8
1
Share

Where to Collect the Annual Inspection Sticker Applied for on 12123?

The annual inspection sticker applied for on 12123 can be delivered by mail or picked up at the vehicle management office. Below is detailed information about vehicle annual inspections: 1. Commercial vehicle inspection: Passenger vehicles for commercial use must be inspected once a year within the first 5 years; after 5 years, they must be inspected every 6 months. 2. Non-commercial vehicle inspection: Trucks and large or medium-sized non-commercial passenger vehicles must be inspected once a year within the first 10 years; after 10 years, they must be inspected every 6 months. 3. Small vehicle inspection: Small and micro non-commercial passenger vehicles must be inspected once every 2 years within the first 6 years; after 6 years, once a year; after 15 years, every 6 months.
14
2
Share

What to Do If You Always Mistake the Accelerator for the Brake?

What to do if you always mistake the accelerator for the brake: 1. Keep your heel on the ground and use your toes to press the brake or accelerator; 2. Place your foot at the same level as the brake; 3. Position your heel below the brake, press the brake straight down, and when pressing the accelerator, keep your heel still and tilt your toes to press the accelerator; 4. Keep your foot on the brake instead of the accelerator, so in case of an emergency, you can press down directly to avoid panic and incorrect operation. The positions of the accelerator and brake are as follows: the accelerator is on the far right, and the brake is in the middle. The accelerator is the car's speed control device, used to regulate speed, while the brake is the vehicle's stopping or deceleration device.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.