What to Do When the Lynk & Co 01 New Energy's Autonomous Emergency Braking Activates Automatically?

1 Answers
MacDaisy
07/30/25 8:53am
The reasons for the Lynk & Co 01 New Energy's autonomous emergency braking activating automatically are as follows: Sensor malfunction or excessive sensitivity may cause the system to activate erroneously. Below is an introduction to the Lynk & Co 01: 1. Powertrain: Equipped with a 2.0TD turbocharged engine from the Drive-E series, it delivers a maximum power of 140kW at 4500rpm and a maximum torque of 300Nm between 1400-4000rpm. Its fuel consumption per 100 kilometers is below 7L, with the two-wheel-drive model at 6.5L/100km and the four-wheel-drive model at 6.9L/100km. The 0-100km/h acceleration times are 7.7s and 7.9s, respectively. 2. Features: The Lynk & Co 01 comes with a comprehensive NVH luxury configuration that prevents noise and vibration at the source, blocks noise transmission paths, and optimizes sound quality for purer and more stable frequencies. It features an INFINITY Hi-Fi level 10-speaker audio system with a total power output of 360W, offering premium car-level audio configuration.
Was this review help?
18
2
Share
More Forum Discussions

How many seconds does the Touareg take to accelerate from 0 to 100 km/h?

According to official data, the Touareg is available in two engine displacements: 2.0T and 3.0T. The 2.0T model accelerates from 0 to 100 km/h in 6.8 seconds, while the 3.0T model does it in 5.9 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time include: Torque: Torque, in simple terms, represents how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. For example, the Audi R8 has a maximum torque of 570 Nm and accelerates from 0 to 100 km/h in 3.1 seconds. The Audi A6 3.0T has a torque of 500 Nm and achieves 0-100 km/h in 5.6 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Audi A6 is equipped with a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is called the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The Audi R8 has a power-to-weight ratio of 373 Hp/T and accelerates from 0 to 100 km/h in 3.1 seconds. The Audi A6 has a power-to-weight ratio of 171 Hp/T and achieves 0-100 km/h in 5.6 seconds.
3
1
Share

What brand of tires does the Tayron use?

The Tayron comes standard with Dunlop SP-SPORT-MAXX050 tires. The model size is 235/50R19. Below is some relevant information about the Tayron: 1. The vehicle has a length of 4590mm, width of 1860mm, height of 1660mm, and a wheelbase of 2731mm. 2. The Tayron is equipped with a 1.4T engine (code-named EA211) and high/low-power versions of the third-generation EA888 2.0T engine. The 1.4T engine delivers a maximum power of 150 horsepower and a maximum torque of 250 Nm; the low-power 2.0T version produces 186 horsepower and 320 Nm of torque; the high-power 2.0T version generates 220 horsepower and 380 Nm of torque.
3
2
Share

What Are the Causes of Car Radiator Leakage?

The causes of car radiator leakage are: 1. The radiator is cracked or corroded; 2. Oil emulsification; 3. The radiator cap is not fastened properly; 4. Leakage at rubber hose connections; 5. Radiator tank rupture. The radiator is part of the car's cooling system. In an engine's water-cooling system, the radiator consists of an inlet chamber, an outlet chamber, a main plate, and a radiator core. It uses water as a heat transfer medium to conduct heat and dissipates it through large-area cooling fins via convection, maintaining the engine's optimal operating temperature. The method for cleaning a car radiator is: 1. Remove the bumper to locate the radiator; 2. Adjust the water gun nozzle to a spray pattern and set the pressure to an appropriate level, then rinse the radiator surface; 3. Check if the cooling fins are damaged; 4. Reinstall the bumper in the reverse order of removal.
16
5
Share

What Causes Car Brake Disc Noise?

The causes of car brake disc noise are: 1. Insufficient tension in the brake return spring; 2. The brake pad material is too hard; 3. The brake pads were installed too close to the brake disc. Types of brake discs include: 1. By structure, they can be divided into: solid brake discs and ventilated discs. 2. By material, they can be divided into: carbon fiber ceramic brake discs and metal brake discs. Methods to determine if a brake disc needs replacement are: 1. Brake pads and brake discs wear relatively; after replacing brake pads 2 to 3 times, pay attention to checking the brake disc; 2. If you hear a rustling sound when braking, check if the brake disc needs replacement; 3. If grooves or small pits appear on the brake disc and the measured depth reaches about 1.5mm, you need to go to a repair shop or 4S store to check the brake disc.
15
5
Share

How to Maintain White Car Paint?

White car paint maintenance methods are: 1. Remove dust from the car body in a timely manner before using the vehicle; 2. Rinse the car promptly after rain; 3. Avoid washing the car under direct sunlight; 4. Use dedicated neutral running water when washing the car; 5. Wipe gently from top to bottom along the direction of water flow; 6. Remove contaminants such as asphalt and bird droppings promptly; 7. Avoid frequent car paint polishing. The treatment method for scratched white car paint is: 1. Clean the scratched area thoroughly; 2. Soak sandpaper in water and wrap it around a hard cotton block; 3. Sand the scratched area smooth with the sandpaper; 4. Prepare tape and a cloth to cover areas that do not need touch-up paint; 5. Combine the touch-up pen with the mini spray can; 6. Start spraying from a certain distance from the scratch; 7. Spray blending clear coat on the touched-up area and let it dry.
1
0
Share

How to Change the Transmission Fluid for the Sylphy?

Sylphy transmission fluid change steps: First, remove the oil drain plug at the bottom to drain the old fluid. After the old fluid is completely drained, clean the components inside the oil pan, replace the paper filter located on the side of the transmission, then refill with new fluid, and reinstall the oil pan. Below is an introduction to the Sylphy: 1. Overview: The Sylphy is a mid-sized car under Dongfeng Motor Co., Ltd., and is one of the most typical mainstream family sedans in the Chinese market. 2. Models: Includes models such as the Octavia PRO, Sagitar, Lavida, Corolla, and Bora. 3. Brand honors: In 2020, the Sylphy was selected for the "2020 Ward's 10 Best Interiors," alongside luxury cars like Audi and Bentley.
4
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.