What to Do When the Low Tire Pressure Warning Light Comes On?

2 Answers
SanEli
07/28/25 8:37pm
When the low tire pressure warning light comes on, you need to stop the car immediately. This light indicates that one of the tires has insufficient air pressure. Low tire pressure can damage the tire and also increases the risk of a blowout. Therefore, it is necessary to stop and check to determine if the issue is related to tire pressure. Tire pressure plays a crucial role in the performance and power of the vehicle. The principle of tire pressure monitoring involves installing a built-in sensor on the tire. The sensor includes a bridge-type electronic pressure sensing device that detects air pressure, converts the pressure signal into an electrical signal, and transmits the signal via a wireless transmitter. The system then displays various data changes on a monitor or alerts the driver through a buzzer or other means, indicating abnormal tire conditions.
Was this review help?
16
0
Share
McEleanor
08/12/25 1:23am
Recently my tire pressure warning light came on, which made me a bit nervous at the time. But as an ordinary driver, I immediately pulled over to a safe spot on the roadside. Low tire pressure is dangerous—it can easily lead to blowouts, increase braking distance, especially at high speeds; it also causes uneven tire wear, increases fuel consumption, and hits the wallet. I always keep a simple tire pressure gauge in my car, and after checking, I found the left rear tire was low, about 20 psi, below the recommended 35 psi marked on the door frame. So I drove to the nearest gas station and spent a few minutes using the self-service air pump to refill it to the normal level. After driving for about ten minutes, the light went off. I recommend checking your tire pressure monthly and keeping it within the manufacturer's suggested range. Keeping a small pump in your car adds peace of mind. If the light stays on after inflating, it might be a slow leak or a sensor issue—head to a repair shop right away, don’t delay, to avoid turning a small issue into a big hassle.
Was this review help?
19
2
Share
Expand All
More Forum Discussions

Which car manufacturer does the XPeng P7 belong to?

XPeng P7 is produced at the Zhaoqing factory and belongs to the XPeng Motors brand. Here is an introduction to the XPeng P7: 1. The 2020 model P7 launched by XPeng has a rear-wheel-drive ultra-long-range version with a range of 706km. The motor has a maximum torque of 390N·m, a maximum power of 196kW, and a maximum horsepower of 267Ps. 2. For car owners who enjoy passionate driving, XPeng has also introduced a four-wheel-drive high-performance version with even better parameters. The rear-wheel-drive ultra-long-range version can achieve a tested range of 600km, with an average speed of 35~40km/h. 3. In terms of safety, XPeng is equipped with 6 airbags, 4 high-precision collision sensors, and electric seat belts. The protection level is among the top in its class. When the sensors detect a strong impact, the high-voltage electricity will be automatically cut off to avoid secondary injuries. The passenger compartment adopts a cage-type structure, with the A-pillar connected to the front longitudinal beam, subframe, front crossbeam, etc., which can greatly buffer impacts from the front and side.
16
2
Share

What does the 'H' on car tires mean?

Car tire 'H' represents the speed rating of the tire. The speed rating indicates the maximum speed at which the tire can carry a specified load under defined conditions. Here is relevant information about tires: Tires are circular elastic rubber products assembled on various vehicles or machinery to roll on the ground. Mounted on metal rims, they support the vehicle body, cushion external impacts, maintain contact with the road surface, and ensure the vehicle's driving performance. Here are the steps for replacing a tire: 1. After parking and turning off the engine, engage the handbrake; 2. Place heavy objects in front of and behind the wheels to prevent sliding, and set up a triangular warning sign behind the vehicle; 3. Use a wrench to loosen the lug nuts of the tire to be replaced in a diagonal pattern; 4. Position the jack on the side where the tire needs to be replaced and lift the vehicle to a certain height; 5. Remove the lug nuts and take off the tire; 6. Install the spare tire or new tire and tighten the lug nuts in a diagonal pattern; 7. Lower the vehicle by releasing the jack and ensure all nuts and bolts are securely tightened.
4
5
Share

Where is the heating switch valve of Dongfeng truck?

Dongfeng truck heating switch valve is located on the central control panel of the dashboard. When turning it on, note that it opens clockwise and closes counterclockwise, and the rotation must be fully completed when switching. Precautions for turning on the heating are as follows: Do not drain water from the system: The position of the radiator should not be altered arbitrarily, and water should not be drained from the system. Without hot water, the heating will become ineffective, making it as if it was never turned on. Do not sleep in the vehicle: After turning on the heating, do not sleep in the vehicle, as it can easily cause dizziness or carbon monoxide poisoning, posing certain life risks. Check promptly if there is an unusual odor: If the heating emits an unusual or foul odor, promptly go to a repair shop for inspection to determine if there is an issue with the air conditioning or bacterial growth causing air pollution. Inhaling such air can have certain impacts on health, so timely cleaning is necessary.
1
5
Share

How to Choose Between BMW 5 Series and X3?

BMW 5 Series is a top-tier luxury mid-to-large executive sedan, where BMW has focused on elevating the model's premium feel to meet business needs. The BMW X3, on the other hand, is a mid-size SUV, and its inherent versatility as a sports utility vehicle makes it more practical than luxurious. The choice depends on your requirements. Below is a comparison of the two: 1. Powertrain Comparison: Both the BMW 5 Series and X3 are equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 252 horsepower and a 0-100 km/h acceleration time of 8.24 seconds. The BMW 5 Series has a total length of 5087mm and a wheelbase of 3108mm, while the X3 measures 4717mm in length with a 2864mm wheelbase. The 5 Series offers an absolute advantage in space and length for enhanced passenger comfort, though its trunk space is smaller than the X3's. 2. Feature Comparison: The 2018 BMW 525Li Luxury Package and the 2018 BMW X3 xDrive25i Luxury Package share identical safety configurations, including optional features. In terms of driving aids, the X3 adds automatic parking assist and hill descent control. For exterior features, the X3 includes a panoramic sunroof, power tailgate, and roof rails.
19
1
Share

Should You Release the Clutch or Brake First After Parking?

When parking, you should first press the clutch pedal, then press the brake pedal, or you can press both the clutch and brake pedals simultaneously. Here are the details: Consequences of Not Pressing the Clutch When Parking: If you don't press the clutch pedal, the engine will stall. Pressing the clutch pedal disconnects the engine from the transmission. The clutch is part of the car's drivetrain system, located between the engine and the transmission, and it can connect or disconnect the engine from the transmission. Parking and Engine Shutdown Sequence: For a manual transmission car, the correct sequence for parking and shutting off the engine is: after the vehicle comes to a complete stop with the brakes, first shift the gear to neutral (N), then engage the handbrake, and finally turn off the engine. After shutting off the engine, shift the gear to park (P).
10
0
Share

How Long Does It Take for Car Paint to Dry Completely After Spraying?

Car paint generally dries within one day after spraying. Introduction to Paint Spraying: Automotive paint spraying typically uses baking paint. In automobile manufacturing plants, after the frame and body are welded, the next step is paint spraying. Types include standard paint, metallic paint, and pearl paint. The process involves applying putty, sanding, and spraying. Precautions for Paint Spraying: Before using the vehicle, promptly remove dust from the body to reduce static electricity's attraction to dust. After rain, wash the car immediately. Rainwater on the car body contains highly concentrated acidic substances, which can damage the paint if not cleaned promptly.
11
4
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.