What to Do When the Lavida Steering Wheel Becomes Heavy?

2 Answers
StBenjamin
07/29/25 6:54am
The solutions for a heavy Lavida steering wheel are: 1. Replace the power steering fluid; 2. Check if there is an issue with the power steering system and take the car to a repair shop for professional maintenance; 3. Inspect whether the front tire pressure is sufficient, and if not, replenish it promptly. Taking the Lavida 2021 model as an example, its body dimensions are: length 4670mm, width 1806mm, height 1474mm. The Lavida 2021 is equipped with a 1.4T turbocharged engine, with a maximum power of 110kW and a maximum torque of 250Nm, paired with a 7-speed dual-clutch transmission.
Was this review help?
11
1
Share
VonFernando
08/12/25 10:16am
If your Lavida's steering wheel suddenly becomes heavier, don't panic. I think the most common reason is a problem with the power steering system, such as an aging power steering pump or a loose belt. Insufficient power steering fluid could also be the cause. Additionally, check if the tire pressure is too low, as tire wear or leaks can make steering much more difficult. It's best to visually inspect the power steering fluid level—you can see it by opening the hood. If it's low, top it up, but don't add random substances. A heavy steering wheel makes driving particularly exhausting, potentially causing hand fatigue and numbness over long drives, and it also affects handling safety. I recommend first checking the tire pressure with a gauge—the normal range is 2.3-2.5 Bar. If there's no improvement, take it to a professional repair shop immediately. Don't delay, as minor issues can turn into major repairs if neglected. Regularly inspecting the power steering system during maintenance can prevent problems before they arise.
Was this review help?
16
2
Share
Expand All
More Forum Discussions

How to Turn on Car Lights?

Generally, to turn off car lights, simply rotate the light control knob to the "OFF" position (some models use "O" for the off position). Some models have a button that can be pressed to turn off the lights. Others have a lever on the light stalk—rotating the lever turns the lights off. To turn on a specific light, rotate the knob or lever to the corresponding position; to turn it off, rotate it back to OFF. In addition, cars have various types of lights, each serving different purposes: Position lights (also known as marker lights) are installed on the car to indicate its width and should be turned on when it is not yet completely dark. Turn signals are used when the vehicle is turning or making a U-turn. Before turning, the turn signal should be activated at least 3 seconds in advance. Only proceed with the turn after confirming there are no vehicles approaching from behind. Avoid turning immediately after activating the signal without checking the rear. Daytime running lights (DRLs) automatically turn on when the vehicle's power is activated but can also be turned off in the vehicle settings. Fog lights are used during rainy or foggy weather. Hazard warning lights, commonly referred to as hazard flashers or "double flashers," are signal lights that alert other vehicles and pedestrians to special situations involving your car.
19
2
Share

How to Apply Car Door Decals?

Clean the car body and ensure it is dry. Determine the desired position for the decal. Generally, apply the decal slowly while using a tool to smooth it out and remove the backing paper simultaneously. Be careful to avoid accidental adhesion. After application, press and smooth the decal several times. Remove the transparent transfer film, then use a utility knife to make a cut at the door and seam, folding it inward for a neat finish.
16
0
Share

What is the transmission of the Lexus CT200h?

The Lexus CT200h is equipped with an ECVT continuously variable transmission, paired with a 1.8L naturally aspirated engine. The engine delivers a maximum power of 100 kW at 5,200 rpm and a maximum torque of 142 Nm at 4,000 rpm. Further details about the Lexus CT200h are as follows: 1. The Lexus CT200h is a compact 5-door, 5-seat hatchback. 2. Its body dimensions are: length 4,360 mm, width 1,765 mm, height 1,455 mm, with a wheelbase of 2,600 mm. 3. It features front-wheel drive, with a front suspension using MacPherson strut independent suspension and a stabilizer bar, and a rear suspension with an independent double-wishbone setup and stabilizer bar.
10
2
Share

How to Activate Cruise Control on the Hongqi H7?

The method to use cruise control on the Hongqi H7 is: The cruise control switch is located on the left side of the steering wheel. Press the button to turn it on, then accelerate to the desired speed and press the set button. Below is an introduction to the Hongqi H7 cruise control system: 1. When driving on highways or long-distance routes, activating cruise control can reduce the driver's workload, allowing for adequate rest. 2. Using cruise control on highways or long-distance routes can minimize unnecessary speed changes, leading to fuel savings. 3. The cruise control system is only suitable for use on highways or long-distance routes with less traffic and cannot be used on roads with complex conditions.
1
0
Share

What brand is the audio system in the Tiggo 8?

The Tiggo 8 is equipped with a Wuhu Sound audio system. The speakers serve as the vehicle's audio signal devices. During driving, the driver can emit necessary audible signals as required by regulations to warn pedestrians and alert other vehicles, ensuring traffic safety. They are also used for prompting and transmitting signals. Introduction to the Tiggo 8: 1. Exterior: The redesigned front grille gives it a more sporty appearance. The side profile also appears increasingly youthful. 2. Dimensions: It measures 4700mm in length, 1860mm in width, and 1746mm in height, with a wheelbase of 2710mm, making it a standard midsize SUV. 3. Interior: It features a contemporary floating central touchscreen design, complemented by piano black trim and chrome accents for a refined look.
19
1
Share

What are the benefits of car electric heaters?

Introduction to the advantages of car electric heaters: 1. When using a car electric heater, the fan motor is connected to the power supply, driving the combustion air fan and the warm air fan. At the same time, the oil pump supplies fuel to the combustion chamber, where the fuel is atomized at the inlet and mixed with air from the self-combustion air inlet. The mixture is ignited by the spark plug, and the heat generated is exchanged with the cold air entering through the cold air inlet via the heat exchanger. The cold air is then converted into warm air and supplied into the cabin through the warm air outlet. The entire operation of the heater is controlled by the control unit. 2. Car electric heaters can extend the engine's service life. Water-type heaters are connected to the engine's cooling water circuit and the water circuit of the heating core in the air conditioning system. Therefore, their biggest advantage is not only providing cabin warmth but also preheating the engine and lubricating oil, which aids in winter engine starts, improving the engine's starting performance and durability. 3. Car electric heaters have a wide range of applications. Most water-type heaters are used in cars and buses, but they are also used in trucks and engineering vehicles in cold regions. The warm air is primarily circulated internally, resulting in less dust and softer, less dry warmth. When selecting a water-type heater, in addition to considering the size of the cabin, factors such as pipeline resistance should also be taken into account. 4. Using an independent heater in the car can provide heating, reduce engine wear, lower emissions, and help protect the environment. In colder northern regions, choosing to use this type of independent heater is an ideal option.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.