What to Do When the Key is Locked in the Car

What Causes a Car's Water Temperature to Be Too High?

Car water temperature being too high is caused by: 1. Insufficient coolant: Prolonged water circulation during engine operation can lead to coolant loss in the engine's cooling system, resulting in insufficient water in the radiator; 2. Radiator leakage: Broken or improperly connected radiator hoses can cause leaks, which then obstructs water circulation; 3. Cooling fan malfunction: A damaged cooling fan or a short circuit in the wiring can prevent the fan from operating or cause it to spin too slowly. The car's water temperature reflects the working condition of the cooling system. The engine must operate within an appropriate high-temperature range. When the engine coolant temperature is around 90 degrees, the engine reaches its optimal operating state. At this temperature, the combustion chamber is hot enough to fully evaporate the fuel, allowing for better fuel combustion and reduced gas emissions.

19

4

Share

How many kilometers should the transmission fluid of the Trumpchi GS4 be replaced?

The transmission fluid of the Trumpchi GS4 should be replaced every 85,000 kilometers or 51 months. Car owners should regularly change the transmission fluid. If the transmission fluid is not replaced for a long time, it will deteriorate and evaporate under high-speed and high-temperature conditions, thereby accelerating the wear of mechanical parts. In severe cases, it may damage internal transmission components and shorten the vehicle's lifespan. The Trumpchi GS4 is a compact SUV launched by GAC Motor, with dimensions of 4545mm in length, 1856mm in width, and 1668mm in height, and a wheelbase of 2680mm. It is equipped with a 1.5T turbocharged engine, delivering a maximum power of 124kW, and is paired with a 6-speed manual transmission, a 6-speed automatic manual transmission, or a 7-speed dual-clutch transmission.

16

4

Share

Should the 10th-generation Accord use 92 or 95 octane gasoline?

Both 92 and 95 octane gasoline are suitable. Here are some details about the Accord's fuel tank: 1. The Accord's fuel tank has a capacity of 60 liters. Higher-octane gasoline offers better anti-knock performance. When the fuel level drops to 1/4, the remaining fuel can typically cover 40-50 kilometers. To avoid running out of fuel and causing the car to stall, it's essential to refuel promptly. 2. For vehicles that have been in use for an extended period, adding a fuel additive to the tank can effectively remove carbon deposits, sludge, and other residues from the engine's fuel system. 3. If the appropriate gasoline is unavailable, an anti-knock additive (i.e., an octane booster) can be added to the gasoline.

5

Share

What should I do if the chassis frame of BAIC Huansu H3 is rusted?

The solution for rust on the chassis frame of BAIC Huansu H3 is to perform rust removal treatment. Use acidic solutions such as sulfuric acid, hydrochloric acid, nitric acid, or phosphoric acid to chemically react with the rust, forming salts that detach from the metal surface. Then, apply paint. The chassis can be armored or plastic-sealed to protect it from debris impact and corrosion. The BAIC Huansu H3 is equipped with a 1.5-liter naturally aspirated engine coded F15C, with a maximum power of 84 kW and a maximum torque of 150 Nm. It is paired with a 5-speed manual transmission. The front suspension uses a MacPherson independent suspension, while the rear suspension employs a five-link coil spring suspension.

7

3

Share

Is the movement of the steering wheel rotation or translation?

The movement of the steering wheel involves both rotation and translation. When the car is moving straight, the steering wheel undergoes translation; when turning the steering wheel, it undergoes rotation. In other words, the steering wheel rotates when being turned and translates when not being turned. The steering wheel is a wheel-shaped device used to control the direction of vehicles such as cars, ships, and airplanes. Its function is to convert the force applied by the driver on the edge of the steering wheel into torque, which is then transmitted to the steering shaft. It mainly consists of a frame, foam, and installation clips or screw holes corresponding to the driver's airbag (DAB). Reasons for misaligned steering wheel include: 1. Relative rotational displacement between the steering wheel and steering column; 2. Inaccurate four-wheel alignment data, steering gear failure, or deformation of the vehicle's stabilizer bar.

11

0

Share

How to Replace the Wiper Blades on a Highlander?

Lift the wiper arm, press the small button inside the circle, then push the wiper toward the windshield. After removing the wiper, proceed to remove the wiper blade. There is a clip; cut it off or use a utility knife to slice horizontally on the right side of the clip. Pull out the wiper blade. Once the old wiper blade is removed, you will find two metal strips in the middle. Insert these metal strips into the slots on both sides of the new wiper blade. Insert the new wiper blade into the wiper, paying attention to the direction: the side of the wiper blade without the clip should be inserted first.

1

2

Share

What to Do When the Key is Locked in the Car

What Causes a Car's Water Temperature to Be Too High?

How many kilometers should the transmission fluid of the Trumpchi GS4 be replaced?

Should the 10th-generation Accord use 92 or 95 octane gasoline?

What should I do if the chassis frame of BAIC Huansu H3 is rusted?

Is the movement of the steering wheel rotation or translation?

How to Replace the Wiper Blades on a Highlander?

What are the methods to reset the maintenance light on a Sagitar?

How Many Kilometers for Mercedes-Benz First Maintenance?

What are the differences between the Prado and the Land Cruiser?

How to Replace the Key Battery for Volkswagen Lamando?