What to Do When the Inside of the Car's Windshield Cannot Be Cleaned Properly?

1 Answers
DelAliyah
07/30/25 12:50am
Solutions for cleaning the inside of the car's windshield when it cannot be cleaned properly: 1. Use a dry cloth to wipe, but avoid being too rough to prevent scratching the glass. Then, clean directly with glass cleaner and wipe with a warm, damp cloth; 2. If spots on the car glass cannot be removed, apply some toothpaste and wipe; 3. Avoid using abrasive cleaners on the vehicle's glass, as such damage can affect the driver's visibility; 4. The owner can first wipe the car glass with a damp cloth, then use a clean damp cloth dipped in a little alcohol or liquor to vigorously wipe the car glass, which can make the glass shine like new.
Was this review help?
13
1
Share
More Forum Discussions

What brand is the engine model 4a15?

The engine model 4a15 is a brand independently developed by GAC Trumpchi. Powertrain: The GAC Trumpchi GS4's engine is independently developed by GAC's GS engine platform, with the engine model being 4a15m1. The GS4 is equipped with two turbocharged engines, a 1.3T and a 1.5T, paired with a 6-speed automatic transmission, a 7-speed dual-clutch transmission, and a manual transmission. Exterior Introduction: The GAC Trumpchi GS4 is an SUV model under GAC, with dimensions of 4545mm in length, 1856mm in width, and 1700mm in height, and a wheelbase of 2680mm. In terms of appearance, the car features a bold front grille, full LED headlights, dual-tone aluminum alloy wheels, a floating roof design, and a dual-exhaust pipe layout at the rear.
18
1
Share

Do You Need to Brake When Shifting from 4th to 3rd Gear?

Do You Need to Brake When Shifting from 4th to 3rd Gear? When upshifting, you must accelerate by pressing the throttle, and when downshifting, you must release the throttle and brake to slow down. However, in specific operations, whether to brake depends on the actual situation. Flat Road: When driving on a flat road and there is no need to reduce speed quickly. If you want to shift from 4th to 3rd gear, you can release the throttle pedal and let the vehicle slow down naturally. When the speed reaches the suitable range for 3rd gear, you can then shift into 3rd gear. Obstacles Ahead: When driving on a flat road and encountering obstacles ahead or the vehicle in front slows down. To shift from 4th to 3rd gear, you must brake to reduce speed so that the vehicle speed reaches the range suitable for 3rd gear, and then shift into 3rd gear. As for whether to brake sharply or gently, it depends on the actual situation. Generally, it is best not to brake sharply to prevent rear-end collisions.
20
2
Share

What is the assembly of a transmission?

The assembly of a transmission is the transmission itself. The transmission mainly refers to the car's transmission: Transmissions are divided into manual transmissions and automatic transmissions. Composition of a transmission: A transmission consists of two parts: the transmission mechanism and the transmission control mechanism. The main function of the transmission mechanism is to change the value and direction of torque and speed; the main function of the control mechanism is to control the transmission mechanism to achieve the transformation of the transmission ratio, that is, to achieve gear shifting for speed and torque variation. Among them, a manual transmission mainly consists of gears and shafts, achieving speed and torque variation through different gear combinations; an automatic transmission is composed of a torque converter, planetary gears, a hydraulic torque variation system, and a hydraulic control system. Speed and torque variation are achieved through hydraulic transmission and gear combinations.
4
4
Share

How Many Times Can You Retake the Test to Restore Driving Eligibility?

You can only restore your driver's license after passing the test, regardless of how many times you take it. If you accumulate 12 points, your license will be directly revoked, and you must reapply and start the driving test process from scratch. Therefore, during the probation period for a Class C driver's license, make sure not to accumulate 12 points—meaning you can only have a maximum of 11 points. Point Deduction: Driver's license point deductions are penalties for traffic violations. Depending on the severity of the traffic violation, points can range from a minimum of 1 to a maximum of 12 per incident. The scoring cycle is one inspection period. If a driver accumulates 12 points within one cycle, they lose their driving eligibility and must undergo at least 7 days of traffic safety education. Only after passing the test can they restore their driving eligibility. Retaking the Test for an Expired License: If a driver's license has been expired for more than 3 years, you must retake the test. If the license has been expired for more than one year without renewal, the vehicle management office will revoke the license. For periods between 1 and 3 years (excluding 3 years), the license will be in a revocable but restorable state, requiring you to retake and pass the subject one test to restore eligibility. For 3 years or more, the license will be permanently revoked, and you must retake the entire driving test to drive again.
14
1
Share

How Long Does It Take to Replace a Radar Fuse?

Replacing a radar fuse usually takes anywhere from a few seconds to about a minute. The time may vary depending on the model and ambient temperature: The recovery process of a self-resetting fuse is essentially the cooling process of the component itself. Once the component cools below its switching temperature, it can conduct electricity again. The closer the component is to the ambient temperature, the closer the current it can carry is to its nominal value. With good heat dissipation conditions, it typically takes just a few seconds to about a minute for normal operation to resume. Avoid long-term bridging: Sometimes, when a self-resetting fuse burns out and a replacement isn't immediately available in an emergency, bridging it directly can restore functionality. However, it's crucial to note that long-term bridging is dangerous. If the condition that originally damaged the self-resetting fuse recurs while it is bridged, more than just the fuse could be damaged—leading to greater losses and, in severe cases, even a fire. Therefore, bridging should be done with caution for safety reasons.
5
0
Share

What procedures are required to apply for temporary license plates at the DMV?

Go to the DMV counter to apply, fill out the application form, submit the required materials, and after review, you can pay the processing fee to receive the temporary license plates. Required documents: Original and photocopy of the vehicle certificate of conformity; duplicate and photocopy of the compulsory traffic insurance; purchase invoice (invoice copy and registration copy) and photocopy; owner's ID card and photocopy (non-local owners need a temporary residence permit and photocopy, and non-local applicants also need the agent's ID card and photocopy). Validity period of temporary plates: Temporary license plates have an expiration date, which is usually indicated on the plates themselves. The validity periods are 15, 30, and 90 days. Temporary plates must be used within the validity period. If the formal license plates are not obtained after the expiration, you must reapply, but the number of applications cannot exceed three times.
2
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.