What to do when the Haval H6 key battery is low?

1 Answers
MacSawyer
07/29/25 2:52pm
When the Haval H6 indicates that the key battery is low, it may be necessary to replace the battery. The steps are as follows: 1. Press the release button to remove the mechanical key. 2. Use a flat-head screwdriver to gently pry open the back cover of the key and remove it. 3. Take out the old battery and insert the new battery into the slot. When installing the battery, ensure the positive side is facing down. 4. Reattach the key cover. After installation, check if all buttons on the key function properly. Regarding the usage precautions for the Haval H6 car key battery: 1. The battery life of a smart car key is approximately one year. Battery consumption varies depending on the frequency of key usage. 2. Using the key at different distances will consume varying amounts of power. 3. Be very cautious when replacing the battery of a smart car key; any mistake could damage the circuit board inside the key. 4. Before replacement, the owner should carefully review the battery replacement diagram. When disassembling the key, pay attention to the original positions of all components and try to choose an original battery. 5. During installation, carefully identify the positive and negative poles of the battery to avoid incorrect placement. Also, pay attention to the sealing ring at the bottom of the key.
Was this review help?
12
3
Share
More Forum Discussions

How to Obtain a Class B Driver's License?

To obtain a Class B driver's license, you should provide your ID card and pay for the examination. Here is a partial introduction about obtaining a Class B driver's license: 1. Class B1 License: The permitted vehicle type is a medium-sized passenger vehicle, defined as a medium-sized passenger vehicle with a length of less than 6 meters and a seating capacity of more than 9 but fewer than 20 people. It should be noted that the Class B1 license does not include the Class B2 license, meaning you cannot drive trucks. 2. Class B2 License: The permitted vehicle type for a Class B2 license is a large truck, which includes heavy-duty, medium-duty trucks; large, heavy, and medium-duty special-purpose vehicles. The Class B2 license also allows driving manual or automatic small passenger vehicles with fewer than 9 seats and heavy-duty or medium-duty trucks. The physical requirements are the same as for the C1 license, mainly concerning vision and color blindness.
15
3
Share

What are the differences between the new and old Reiz models?

New Reiz vs. old Reiz differences are as follows: 1. Interior materials: The old Reiz has better interior materials than the new Reiz. Even the base model of the old Reiz features extensive leather-wrapped and stitched areas. 2. Power tuning: The old model performs better than the new one, especially in throttle response which is noticeably more sensitive than the new Reiz. Even the 2.5L models respond actively with just a light press of the accelerator, providing a more comfortable overall feeling during acceleration and starting. 3. Horsepower: The new Reiz has slightly reduced horsepower compared to the more powerful old Reiz.
1
3
Share

How many points will be deducted for making a U-turn at a double solid line?

Making a U-turn at a double solid line is a traffic violation. According to Article 90 of the Road Traffic Safety Law, violators will be fined 200 yuan and receive a 3-point penalty. Generally, on long roads, there are white solid lines in the middle section or before intersections. If the lines are yellow dashed or white dashed, U-turns are allowed. However, U-turns are strictly prohibited at any solid lines. Permissible situations for U-turns: Intersections with U-turn signs: If there is a clear U-turn sign at an intersection, U-turns are allowed. If there is a U-turn traffic light, follow its instructions. If there is no traffic light, make the U-turn without obstructing other vehicles or pedestrians. Intersections without explicit no-U-turn or no-left-turn signs: U-turns are allowed if there are no signs explicitly prohibiting them. This means if there are no 'No U-turn' or 'No Left Turn' signs, and the center line is not solid, U-turns are permitted. Yellow grid lines also allow U-turns: Yellow grid lines are no-parking zones, typically marked at intersections prone to congestion due to temporary stops, important entrances, or other designated areas. While parking on yellow grid lines is prohibited, U-turns are allowed unless there is a central barrier. Intersections with U-turn traffic lights: If there is a U-turn traffic light, follow the light—only proceed when it is green. When 'No Left Turn' and 'U-turn Allowed' signs appear together: U-turns are permitted, but left turns are not. Note that 'No U-turn' is not the same as 'No Left Turn'. Things to note when making U-turns at intersections: Observe road markings. If the line is solid, U-turns are prohibited under any circumstances. Continue driving to find a suitable spot. If there is a 'No Left Turn' sign, U-turns are also prohibited at that intersection, as U-turns require a left turn first. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, U-turns are not allowed. Always yield to oncoming traffic when making a U-turn. Failure to do so may result in full liability for any accidents. Near intersection stop lines, lanes often have guiding arrows. The leftmost lane may not always have a left-turn arrow. If it has a straight arrow, U-turns are prohibited even without explicit signs. U-turns are not allowed on pedestrian crosswalks and are considered a violation.
14
2
Share

Is a 1.5L displacement sufficient for family use?

1.5L displacement is sufficient for family use. Here is some information about 1.5L displacement cars: 1. 1.5L displacement: It is suitable for family use, but a 1.5L automatic may feel uncomfortable to drive, with slower acceleration. For automatic transmissions, this displacement is relatively low. 1.5L = a naturally aspirated engine with 1.5L displacement, 1.5T = a turbocharged engine with 1.5L displacement. 2. Power: The difference between 1.5L and 1.5T is that adding a turbocharger to the 1.5L engine turns it into a 1.5T engine. The result is nearly the same fuel consumption but with power output similar to a 1.7L engine. The main function of a turbocharger is to increase the engine's air intake, thereby enhancing its power and torque.
12
2
Share

Must You Press the Clutch When Braking a Manual Transmission Car?

Manual transmission cars require pressing the clutch when braking. Here is some information about braking in manual transmission cars: 1. Manual Transmission Cars: When driving a manual transmission car, improper clutch coordination can easily cause the car to stall. When trying to slow down, it can be confusing whether to press the brake or clutch first, or both simultaneously. Slamming on the brakes suddenly may also cause the car to stall. If you don't downshift gradually but brake directly, the speed will drop, and then you can press the clutch to stop. 2. Pressing the Clutch: Pressing the clutch first will still allow the car to lurch forward and does not effectively brake, which is a dangerous practice. However, there are situations where you press the clutch before braking, such as when learning to drive in a driving school (e.g., during the second subject test), where the engine operates at low speeds and is prone to stalling.
10
3
Share

Do self-driving cars still require a driver's license?

Yes, a driver's license is required. According to current laws, even if a vehicle has autonomous driving capabilities, the driver still needs a driver's license to operate the vehicle. To drive a motor vehicle, one must legally obtain a motor vehicle driver's license. Applying for a motor vehicle driver's license requires meeting the driving permit conditions set by the public security department of the State Council. After passing the examination, the traffic management department of the public security authority will issue the corresponding category of motor vehicle driver's license. Below is relevant information: 1. The meaning of autonomous driving technology: Self-driving cars are a type of smart vehicle, also known as wheeled mobile robots, primarily relying on in-vehicle computer systems to achieve autonomous driving. 2. The principle of autonomous driving technology: It uses onboard sensors to perceive the vehicle's surrounding environment and, based on the obtained information about the road, vehicle position, and obstacles, controls the vehicle's steering and speed to ensure safe and reliable driving on the road.
17
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.