What to Do When the Haval H2 Tire Pressure Monitoring Does Not Display Numbers?

1 Answers
Sanders
07/29/25 5:29pm
The reason why the Haval H2 tire pressure monitoring does not display numbers is that the battery is dead, or there is a malfunction in the tire pressure detection method. The role of tire pressure monitoring: It automatically monitors the tire pressure of the car in real time during driving. When the tire leaks or has low pressure, it alerts to ensure driving safety. High tire pressure: It reduces the contact area between the tire and the ground, so the pressure and wear per unit area increase, which can easily lead to brake failure. When there are protrusions or depressions on the ground, the tire is prone to burst. Low tire pressure: It increases the contact area between the tire and the ground, raising the internal temperature of the tire during driving, which can easily cause a blowout, increase fuel consumption, and reduce the lifespan of the tire.
Was this review help?
19
0
Share
More Forum Discussions

How Often Should the Antifreeze in a New Car Be Replaced?

Different brands may vary in quality, leading to different service lives. Generally, antifreeze should be replaced every two years, though some brands suggest 4-5 years or longer. If there is no specific guideline, you can determine whether replacement is needed based on the antifreeze's freezing point or condition. How to Check Antifreeze (Antifreeze Coolant): After the car has cooled down, open the engine compartment and check if the coolant level is sufficient. The coolant reservoir has MAX and MIN level marks. If the level is below the MIN mark when the engine is cold, add coolant until it reaches between the MAX and MIN marks. Antifreeze Replacement Interval: The recommended replacement interval for antifreeze is 100,000 kilometers, with a replacement volume of 6 liters. The color of the antifreeze does not indicate its quality; it simply reflects the different pigments added by manufacturers. After some use, the decision to replace antifreeze should not be based on its color but on its concentration (which can be tested with specialized test strips available at service stations).
4
5
Share

Is the USB in the car 5V or 12V?

The USB in the car is 5V. Function of USB port: Many car USB ports are designed for audio data transmission. The current of car USB ports can be either 5V/2.1A or 5V/0.5A. Matching charging current: Many mobile phones require an input current of 5V/1A. A car USB port with 5V/2.1A is certainly no problem, as it can provide 1A current for mobile phones and 2A current for tablets. If it's 5V/0.5A, it's obvious that the current will not meet the standard. Charging a mobile phone under such conditions will not only take a long time but also cause the phone to overheat.
7
2
Share

What Causes Car Shaking at Low Speed but Normal at High Speed?

Car shaking at low speed but normal at high speed is mainly due to throttle valve carbon buildup. Throttle Valve Carbon Buildup: As the car is used over time, the intake tract may become clogged, and carbon deposits or oil may accumulate in the throttle valve, leading to unstable idle speed or even low idle speed. Throttle Valve Cleaning Interval: It is generally recommended that car owners clean the throttle valve every 20,000 to 40,000 kilometers. However, this is only a reference value. The specific cleaning interval should be based on the individual's driving environment, the type of engine oil used, the frequency of air filter replacement, and driving habits. If symptoms such as insufficient engine intake, unstable idle speed, sudden deceleration when releasing the throttle, reduced power, difficulty starting, or increased fuel consumption are noticed, it may indicate that the throttle valve needs cleaning.
9
3
Share

Is it necessary to apply film on the rear windshield?

Whether to apply film on the rear windshield of a car depends on individual circumstances. The following are the benefits of applying glass film and precautions after application: Benefits of applying glass film to cars: Applying film is to block sunlight, especially during midday when external glare significantly affects driving visibility. Film can effectively filter out such glare, and some films can also reduce direct UV radiation into the car. Additionally, film can prevent the shattering of window glass, which could cause cuts, by providing a protective layer that holds the glass together, preventing fragments from scattering even if the glass breaks. Precautions after applying film: Avoid opening windows arbitrarily because the heat-insulating film needs time to firmly adhere to the window. During this period, opening or closing the window may cause the edges of the newly applied film to lift or the film to shift if it hasn't fully bonded. If the window is accidentally opened without causing damage, it's best to simply avoid opening it unnecessarily. Also, do not direct the air conditioning straight at the front windshield. After applying film to the rear windshield, avoid using the rear defroster lines.
15
1
Share

Can You Drive Without Changing to Snow Tires in Winter?

It is possible to drive without changing to snow tires in winter. Snow tires are a type of tire suitable for use in snowy conditions, enhancing a vehicle's traction and safety on icy or snowy roads. They serve as an alternative to snow chains. The characteristics of snow tires are as follows: Wider Tread: A larger contact area provides stronger grip; deeper tread grooves allow the tire to interlock with snow on snowy surfaces. Deeper Drainage Grooves: Enhanced snow evacuation and compaction capabilities ensure sufficient friction. Angled Shoulder Tread: Effectively prevents side slipping and ensures stability during turns; the softer material offers better ground adhesion.
2
2
Share

Why don't sedans have reflective stickers?

Sedans don't have reflective stickers because their lighting systems are more comprehensive compared to those of large trucks. Proper placement of vehicle reflective stickers: Reflective stickers should be applied on unobstructed, visible, flat, continuous surfaces of the vehicle body that are free from dust, water stains, oil stains, rust, or peeling paint. Purpose of vehicle reflective stickers: Reflective stickers are designed to make vehicles more noticeable to drivers from all directions at night. They utilize the unique properties of reflective materials to redirect light back towards its source. The stickers themselves don't emit light but reflect incoming light, with the brightness of reflection being proportional to the intensity of the incoming light.
14
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.