···
Log in / Register

What to Do When the Haval Chulian Has No Network Connection

4 Answers
SanElias
07/29/25 11:51am

If the Haval Chulian has no network connection, you can promptly contact the 4S dealership. The composition of the vehicle networking system includes the following four aspects: On-board System: It interacts with various devices in the vehicle. Through these sensor devices, the vehicle can not only obtain real-time information about its position, orientation, distance traveled, speed, and acceleration, but also perceive external environmental data such as temperature, humidity, light, and distance via various environmental sensors. Vehicle Identification System: This system consists of several identification markers on the vehicle and external recognition devices, primarily using RFID and image recognition systems. Roadside Equipment System: Installed in high-traffic areas, intersections, or hazardous zones, it collects traffic flow data at specific locations, analyzes congestion information, and provides recommendations to traffic participants to avoid congestion. Information Communication Network System: This system is essential for transmitting various types of data and is a critical component of the network link layer. Currently, vehicle networking communication systems mainly rely on WiFi, mobile networks, wireless networks, and Bluetooth networks.

Was this review help?
19
2
Share
LeHaven
08/13/25 8:57pm

When driving the Haval Chulian, if there's no network connection, the first thing I would do is pull over and check the vehicle's system network settings. I'd confirm whether the main screen shows a gray network icon. If it does, I'd try turning on the data connection option in the settings menu—sometimes the switch is accidentally turned off. Next, I'd restart the infotainment system by holding the volume knob for 10 seconds to force a reboot, which often resolves minor temporary issues. I'd also check if the vehicle is in an area with poor signal, like a basement or mountainous region, and move to an open area if necessary. Don’t forget to inspect the built-in SIM card to ensure it's not overdue on payments or loose, as the car's network relies on it. If the problem persists, I'd contact a Haval 4S dealership to schedule a software update or hardware inspection—the onboard module might need a reset. It's also best to have the system checked during regular maintenance for preventive care, saving time and hassle.

Was this review help?
15
5
Share
Expand All
SanDelaney
10/08/25 7:01am

Speaking of the Haval First Love losing network connection, this occasionally happens on my commute. First, don't panic—manually enable the hotspot function in settings as a backup connection. Check if your phone is functional and use its hotspot for emergency navigation and music. Also, consider whether weather or location might be affecting the signal in a dead zone. Last time, I encountered this in a parking garage, but the signal returned once I reached the city. It's good practice to quickly check the data switch status before each startup. If navigation fails, rely on your phone's offline maps as a backup. During maintenance, mention the car's network system to the technician—they can optimize settings to prevent recurring issues. These simple steps can resolve the problem without much hassle.

Was this review help?
13
2
Share
Expand All
Matt
11/21/25 8:20am

Network failure may be caused by antenna or software issues leading to Haval Jolion disconnection. When antenna reception is poor, the signal naturally weakens. I will check if the roof module is damaged, affecting transmission. System software updates can resolve many bugs, and in-vehicle OTA updates need to be performed regularly. The vehicle's computer has a diagnostic interface, and I use basic tools to read error codes for analysis. Additionally, poor SIM card contact or exhausted data plans could be potential causes. Simple module resets or power cycling can alleviate some situations. Preventive inspections can avoid long-term loss of functionality.

Was this review help?
20
1
Share
Expand All
More Forum Discussions

Can gear oil still be used after being stored for 8 years?

Gear oil that has been stored for 8 years cannot be used. Here is the relevant information: 1. Manual transmission: Manual transmissions use gear oil, whose main functions are to provide good lubrication for the gears and clean the metal debris generated by gear wear, ensuring the transmission operates healthily and stably. 2. Automatic transmission: Automatic transmissions use specialized automatic transmission fluid (ATF), which not only lubricates and cleans but also transmits engine power within the torque converter. Whether it's gear oil for manual transmissions or ATF for automatic transmissions, it is recommended to replace them every 40,000 kilometers.
13
1
Share

What are the differences between the Lamando GTS and the Lamando?

There are several differences between the Lamando GTS and the Lamando: 1. Different exterior dimensions: Volkswagen Lamando: Length × Width × Height (mm) 4615 × 1826 × 1425. Lamando GTS: Length × Width × Height (mm) 4610 × 1816 × 1425. 2. Different tire sizes: Volkswagen Lamando: Tire specification 205/60-R16. Lamando GTS: Tire specification 225/45-R18. 3. Different wheelbase: Volkswagen Lamando: Wheelbase 2656mm. Lamando GTS: Wheelbase 2646mm.
16
4
Share

What does ETC stand for?

ETC is the abbreviation for Electronic-Toll-Collection, which translates to "electronic non-stop toll collection" (electronic toll collection) in Chinese. It is an automatic toll collection system for highways or bridges. According to the State Council's regulations, starting from 2020, vehicles without ETC will not enjoy toll discounts. In the future, only one manual lane will be retained at highway toll stations, and tolls can only be paid through manual channels. During free holiday periods, vehicles can still use the highway. For users who have installed ETC, passing through ETC lanes will not incur charges. ETC toll deduction principle: There will be one or more ETC lanes on the highway. Through dedicated short-range microwave communication between the on-board electronic tag installed on the vehicle's windshield and the microwave antenna in the ETC lane of the toll station, computer networking technology is used to settle accounts with the bank in the background. This achieves the purpose of vehicles not needing to stop at toll stations to pay tolls, all based on the principle of "pass first, deduct later." Benefits of installing ETC: Save time: Eliminates the hassle of waiting in line; Green and eco-friendly: Low-carbon, vehicles pass through toll stations without stopping, reducing noise and exhaust emissions, and minimizing pollution; Reduce wear and tear: Saves costs, reduces the frequency of vehicle starts and brakes, and lowers wear and fuel consumption; Improve efficiency: The efficiency of passing through ETC lanes can theoretically increase by 2-3 times, making traditional ETC updates faster and more high-tech. Compared to license plate payment, ETC technology is more mature and advantageous. More policy support: The State Council clearly stated in the "13th Five-Year Plan for the Development of a Modern Comprehensive Transportation System" that "by 2020, the interoperability of transportation cards in key urban clusters will be basically achieved, and the proportion of vehicles equipped with ETC will be significantly increased." It also set a target in the "13th Five-Year" comprehensive transportation development indicators: "By 2020, the ETC usage rate for road passenger vehicles will reach 50%." More future possibilities: In addition to continuously improving the convenience of ETC installation and usage and the ETC passenger vehicle usage rate, the future will also promote the use of ETC for trucks and explore deep integration of the ETC system with smart transportation development directions such as vehicle-to-vehicle communication and vehicle-road coordination. This will provide car owners with comprehensive travel services, meaning more application scenarios will support ETC applications. ETC usage precautions: The ETC transaction sensing area is 8 meters. When encountering a vehicle in front that has stopped, to prevent the ETC device of the front vehicle from malfunctioning or not having an ETC device at all, maintain a distance of more than 10 meters from the front vehicle to avoid automatic sensing and toll payment for the front vehicle. The recognition speed for ETC lane passage is 20 km/h. If the speed is too fast, the vehicle device information cannot be read, which will also lead to toll deduction failure. Unauthorized disassembly or movement of the OBU device, or detachment or loosening of the ETC electronic tag, will cause the electronic tag to fail. It can be sent to the bank where the ETC card was issued or the highway service office for testing. If the loosening or detachment is not due to human factors, it only needs to be reactivated. When using a debit card bound to ETC, insufficient balance will also cause toll deduction failure. Follow the guidance of on-site staff to go to the manual MTC lane and use cash or card payment to pass. Thick car windshields may cause poor sensing. This is especially important for vehicles that have had their windshields replaced after accidents or for those who have modified their front windshields.
19
2
Share

Where is the Wiper Fuse Located in a Car?

The wiper fuse is typically located inside the fuse box in the engine compartment. Here are the specific details: The fuse box contains various types of fuses, and the design varies among different car models. To locate the wiper fuse, refer to the instructions on the fuse box cover. Generally, cars have two fuse boxes, each managing different circuits. Each fuse box comes with a white clip for replacing fuses. Common reasons for wiper fuse failure include: 1. Excessive resistance and current overload: Using unsuitable wipers or rusted wiper connections can increase resistance, leading to excessive current and fuse burnout. Solution: Apply grease to rusted parts or replace with suitable wipers. 2. Circuit issues: Using a fuse with too low a rated power or short circuits can cause the fuse to blow. Solution: Have the car inspected at a 4S shop.
20
3
Share

How often should the engine oil be changed for a Focus?

The oil change interval for a Focus depends on the type of oil used: mineral oil generally needs to be changed every 5,000 kilometers; semi-synthetic oil typically requires replacement every 7,000 kilometers; and full synthetic oil usually needs to be changed every 10,000 kilometers. More information about engine oil is as follows: 1. Engine oil serves functions such as lubrication and wear reduction, auxiliary cooling, sealing and leak prevention, rust and corrosion protection, as well as shock absorption and cushioning for the engine. 2. Engine oil is known as the 'blood' of a car. 3. Engine oil consists of two parts: base oil and additives. The base oil is the main component of lubricating oil, determining its basic properties, while additives can compensate for and improve the shortcomings of the base oil, providing certain new characteristics, making them an important component of lubricating oil.
7
4
Share

How to Open the Hood of a Buick LaCrosse?

Here is the method to open the hood of a Buick LaCrosse: 1. Pull the hood release handle until the hood slightly opens. The release handle is located under the instrument panel on the left side of the steering column. 2. Walk to the front of the car and locate the auxiliary release handle. This handle is positioned near the center of the hood's front edge, on the passenger side. Push the auxiliary release handle towards the driver's side while lifting the hood. The method to close the hood is as follows: 1. Before closing the hood, ensure all filler caps are securely in place. 2. Lower the hood to an appropriate height above the vehicle and press down firmly to close it completely. Check to ensure the hood is securely closed, and repeat the process if necessary.
10
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.