What to Do When the Handbrake is Pulled Too High and Won't Release?

1 Answers
DaisyDella
07/29/25 7:17pm
First, use your right hand to grip the handbrake lever and lift it slightly higher. Then, press the handbrake button with your thumb and push the handbrake lever down. During the process of pushing the handbrake lever down, do not release the button, otherwise the handbrake won't release.
Was this review help?
5
4
Share
More Forum Discussions

What Causes the Sound When Turning the Steering Wheel?

Car turning the steering wheel may produce sound due to friction between plastic components, as steering wheels are typically made of plastic. If the temperature drops, the plastic can harden, naturally leading to friction noises. If the sound originates from inside the steering wheel, it might be an issue with the clock spring (spiral cable). Try removing the steering wheel and applying some grease to the clock spring to see if the noise persists. If it continues, the clock spring may need replacement. Additionally, avoid turning the steering wheel to its extreme limits during turns, as this can help protect the steering mechanism. Regularly inspecting the tie rods can also effectively reduce minor issues like steering wheel vibrations.
5
0
Share

What are the procedures and precautions for buying a new car?

When purchasing a new car, be careful not to complete any procedures before picking up the car, and check the quality of the car. The following are the specific details: Do not complete any procedures before picking up the car: You can simply sign a contract. At this time, pay attention to checking the condition of the vehicle's exterior, interior, chassis, engine, tires, etc. After confirming there are no issues, check various documents such as the purchase invoice, vehicle certificate, warranty card, user manual, other documents or accessories, and verify whether the car matches its brand name and the details of the contract. Finally, handle the insurance. Carefully inspect the quality of the car during the examination: It is best to bring an experienced driver along to inspect the car. Check whether it is an accident car, inventory car, or flood-damaged car, whether the mileage is within a reasonable range, whether the engine oil and antifreeze are sufficient, and whether there are any signs of wear on the car. It is best to take the new car for a test drive to ensure there are no abnormalities during operation. Only after confirming everything is correct can you take the car and leave.
3
3
Share

Do You Need to Press the Accelerator When Reversing an Automatic Car?

Whether you need to press the accelerator when reversing an automatic car depends on the situation. Here is some information about reversing a car: Introduction to Reversing: Generally, when reversing an automatic car, you don't need to press the accelerator. Simply shift into R gear, release the brake, and the car will automatically move backward. However, if you encounter a slope or the wheels are on a speed bump, the idle engine power might not be enough to overcome the resistance. In such cases, you may need to gently press the accelerator to reverse. Choosing to Reverse from the Left Side: Reversing from the left side makes it easier for the driver to observe. During the reversing process, first look behind, then pay attention to the side mirrors. The horizontal distance on the right side should be slightly larger than on the left.
13
1
Share

What are the differences between the BMW 4 Series and 3 Series?

The differences between the BMW 4 Series and 3 Series lie in the model types and exterior design, with specific details as follows: Model Types: The BMW 4 Series includes convertible, coupe, and gran coupe versions. Both series share the same chassis and powertrain, but the 4 Series has a more distinctive exterior design. Additionally, the 4 Series is exclusively imported, while the 3 Series is available in both domestic and imported models. Exterior Design: The most significant difference between the BMW 4 Series and 3 Series is in their exterior appearance. The 4 Series resembles a sports coupe, whereas the 3 Series is only available in long-wheelbase and standard-wheelbase four-door sedan versions.
7
4
Share

Can China III Diesel Vehicles Undergo Annual Inspection?

China III diesel vehicles can normally participate in the annual inspection. Below are the relevant details about the annual inspection: Vehicle Inspection Regulations: For passenger vehicles used for commercial purposes, inspections are required once a year within the first 5 years, and every 6 months thereafter. For trucks and large or medium-sized non-commercial passenger vehicles, inspections are required once a year within the first 10 years, and every 6 months thereafter. For small and mini non-commercial passenger vehicles, inspections are required once every 2 years within the first 6 years, once a year thereafter, and every 6 months after 15 years. Consequences of Not Participating in the Annual Inspection on Time: Vehicles that do not undergo the annual inspection on time are not allowed on the road. Driving such vehicles will result in 3 penalty points and a fine. In case of a traffic accident involving a vehicle that has not undergone the annual inspection, the party involved will bear full or primary responsibility, and the insurance company will not compensate.
10
5
Share

What is the actual fuel consumption of the 3.5T Ford Raptor?

The 3.5T Ford Raptor has a fuel consumption of 16.7L/100km. Below are the fuel consumption calculation formula and fuel-saving tips: Correct fuel consumption calculation formula: Fuel consumed ÷ distance traveled × 100 = fuel consumption per 100km. The data on fuel consumed is relatively difficult to obtain. Generally, a full tank is used as the initial data. After driving a certain distance, the tank is filled again, and the fuel amount provided by the gas station is taken as the final data. Fuel-saving tips: When starting the vehicle, use a low gear, gently press the accelerator, and gradually increase speed. Avoid suddenly stepping hard on the accelerator, as this can multiply fuel consumption. Starting by gently pressing the accelerator can shorten the engine warm-up time and effectively improve fuel utilization, thereby achieving fuel-saving effects.
12
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.