···
Log in / Register

What to Do When the Front Windshield Fogs Up?

4 Answers
LeJasmine
09/08/25 2:20am

If you notice that the fog inside the car is not too heavy, you can open the windows on both sides slightly to create a convection of air inside and outside the car. This will reduce the temperature difference and the fog will disappear. Almost all cars on the market have air conditioning vents located under the front windshield. Simply adjust the air conditioning to the appropriate setting to use the airflow from the air conditioning to defog the windshield.

Was this review help?
19
4
Share
EleanorLee
09/19/25 8:00am

As a commuter who drives to work frequently, my car's windshield tends to fog up in winter, mainly due to the condensation of warm air inside the car hitting the cold glass, which obstructs visibility. In such cases, my go-to method is to immediately turn on the air conditioning, switch to the defogging mode (the fan icon), and activate the external air circulation while increasing the fan speed. The fog usually clears within two to three minutes. On rainy summer days when the interior gets too humid, I also roll down the windows for a few seconds to ventilate, cool down, and reduce humidity to prevent fogging. Safety is paramount—never wipe the fog with your hands while driving, as it can be distracting. If necessary, pull over to handle the issue. Developing good habits like checking if the air filter is clogged, regularly cleaning the inside of the windshield, or using an anti-fog spray can minimize such hassles, especially for daily commuters like me, making life much easier.

Was this review help?
1
3
Share
Expand All
KiraMarie
11/02/25 8:21am

As an average driver, I always find it annoying when the windshield fogs up. The key is not to panic and just press the defrost button on the AC. Most cars have this feature—it's the button on the center console with a fan and a downward arrow. Pairing it with slightly higher temperature settings (warm air) works even better, clearing the fog quickly without much hassle. For light fog, I've also tried opening the windows to allow air circulation, which helps dehumidify and prevent condensation. For safety, slow down and move to the right lane when fogging occurs, and use the wipers as an aid but don’t rely on them entirely. Occasionally, the cause might be damp items left in the car or moisture brought in on rainy or snowy days, so it’s important to keep the interior dry—for example, don’t leave wet umbrellas on the seats. These methods have made my drives much safer, especially when carrying family, as I pay extra attention to handling this detail.

Was this review help?
13
1
Share
Expand All
VanZane
12/16/25 8:25am

As a seasoned long-distance driver, I often encounter windshield fogging due to significant temperature differences and high humidity inside the car. The quickest solution is to turn on the air conditioning in defog mode after starting the vehicle, with the fan set to high to blow hot air onto the windshield. For cars without AC or older models, directing hot air at the windshield for a few minutes can also be effective. Safety measures include slowing down or pulling over briefly when fogging occurs to ensure clear visibility. For prevention, I recommend regularly checking the car's ventilation ducts and AC system to avoid odors that might impair defogging performance.

Was this review help?
19
2
Share
Expand All
More Forum Discussions

What is the engine model of the Haval H6?

Haval H6 uses a turbocharged engine provided by Shenyang Aerospace Mitsubishi, so this engine is domestically produced. The engine model specifications used in the Haval H6 are: GW4G15B, 1.5T version engine with a maximum power of 124kW and a maximum torque of 285Nm; 2.0T version engine with a maximum power of 169kW and a maximum torque of 385Nm. The Haval H6's engine can be maintained daily using the following methods: Use lubricating oil of appropriate quality grade. For gasoline engines, SD--SF grade gasoline engine oil should be selected based on the additional devices of the intake and exhaust systems and usage conditions; for diesel engines, CB--CD grade diesel engine oil should be selected according to mechanical load, with the selection standard not lower than the manufacturer's specified requirements. Regularly change the oil and filter. The quality of any grade of lubricating oil will change during use. After a certain mileage, performance deteriorates, which can cause various problems for the engine. To avoid failures, oil should be changed regularly according to usage conditions, and the oil level should be kept moderate. When oil passes through the fine holes of the filter, solid particles and viscous substances in the oil accumulate in the filter. If the filter is clogged and oil cannot pass through the filter element, it may rupture the filter element or open the safety valve, allowing oil to bypass through the bypass valve and still carry contaminants back to the lubrication parts, accelerating engine wear and increasing internal pollution. Regularly clean the crankcase. During engine operation, high-pressure unburned gases, acids, moisture, sulfur, and nitrogen oxides from the combustion chamber enter the crankcase through the gap between the piston rings and cylinder walls, mixing with metal powder from part wear to form sludge. A small amount remains suspended in the oil, while a large amount precipitates, clogging filters and oil passages, making engine lubrication difficult and causing wear. Regularly use radiator cleaner to clean the radiator. Removing rust and scale not only ensures the engine operates normally but also extends the overall lifespan of the radiator and engine.
9
3
Share

What is the fuel tank capacity of the Kia KX1?

The fuel tank capacity of the Kia KX1 is 43 liters. It is equipped with a 1.5L naturally aspirated engine or a 1.4T turbocharged engine, paired with a continuously variable transmission (CVT). The vehicle adopts a front-engine, front-wheel-drive layout across all models. Among vehicles in the same class, the Highlander has a fuel tank capacity of 60 liters, while the Haval H6 has a fuel tank capacity of 58 liters. During the actual refueling process, the amount of fuel may exceed the calibrated capacity. This is because the fuel tank capacity specified by the automaker is measured from the bottom of the tank to the safety limit level. There is additional space from the safety limit level to the tank opening, which is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the specified tank capacity. If owners want to check the remaining fuel level, they can observe the fuel gauge on the right side of the instrument panel, which is marked with E and F. When the needle is close to E, it indicates low fuel, while nearing F means the fuel level is sufficient.
2
1
Share

Where to Extract Engine Oil from a Land Rover Range Rover?

Engine oil is extracted from the engine compartment of a Land Rover Range Rover. Method for extracting oil from the engine compartment: You can disconnect the metal oil pipe in front of the gasoline nozzle at the point where it connects to the soft hose, insert the soft hose into a fixed container, and then turn the engine key to the drive position. Do not turn it to the start position, as the oil pump will then pump out the gasoline. However, this operation is generally not recommended due to numerous potential hazards. Precautions for oil extraction: Check whether the vehicle's engine is in an overheated state. If it is overheated, do not risk operating, as it can easily cause accidents; Do not operate alone. It is better to have two people cooperating; Ensure the oil collection container is securely fixed, and the oil pipe is inserted into the container properly; Do not extract oil for an extended period or in large quantities. Generally, it should not exceed 10 seconds, otherwise it can easily lead to other malfunctions or accidents.
7
3
Share

What are the reasons for a complete power failure in the FAW J6?

The reasons for a complete power failure in the FAW J6 include low battery voltage and insufficient battery charge. Below are detailed explanations and solutions: Low battery voltage: If the battery voltage is too low to power the dashboard and indicator lights normally, it may have already caused data loss. In this case, you need to visit a 4S store for initialization, commonly known as decoding or code matching. Most domestic vehicles can be jump-started, but many still require initialization at a 4S store. Insufficient battery charge: If the battery is completely dead, you can use jumper cables to connect to another vehicle's battery for a temporary start. However, it is best to remove the battery and take it to a battery shop for charging, as a completely dead battery cannot be fully recharged by short-term driving. It requires a longer charging period to restore its capacity. If you have a portable charger, you can charge the battery directly in the vehicle without removing it. Jump-starting procedure: First, open the hoods of both vehicles. Connect the positive and negative terminals of both batteries using jumper cables. Then, start the engine of the functioning vehicle and press the accelerator pedal without load. Finally, attempt to start the vehicle with the dead battery.
5
1
Share

What is the fuel consumption of the Roewe W5?

Roewe W5, 1.8T automatic fuel consumption is 14.1 liters/100 km. Fuel consumption calculation based on displacement: For a 1.0-liter displacement car, manual transmission models consume a little over 5 liters/100 km; automatic transmission models consume nearly 6 liters/100 km. For a 1.6-liter displacement car, manual transmission models consume over 7 liters/100 km; automatic transmission models consume over 8 liters, nearly 9 liters/100 km. For a 1.8-liter displacement car, manual transmission models consume around 9 liters/100 km, automatic transmission models consume over 10 liters, nearly 11 liters/100 km. For a 2.0-liter displacement car, manual transmission models consume over 10 liters/100 km, automatic transmission models consume around 12 liters, nearly 13 liters/100 km. Fuel consumption introduction: Constant-Speed Fuel Economy: Constant-speed fuel consumption refers to the fuel economy indicator when a car is driving at a constant speed on good road conditions. Since constant-speed driving is a basic operating condition for cars on highways, and this type of fuel consumption is easy to measure, it is widely adopted. For example, France and Germany use the constant-speed fuel consumption at 90 km/h and 120 km/h as the main evaluation indicators for fuel economy.
1
1
Share

What is the reason for the Passat's auto hold not responding?

Passat's auto hold not responding is due to the lever not being fixed, parking brake failure, aging parking brake, excessive gap between the auto hold system's friction plate and brake drum, or severe wear of the parking brake pin shaft. Below are detailed explanations and solutions: Lever not being fixed: The parking brake lever cannot be fixed and needs to be replaced or reinstalled. Parking brake failure: It is necessary to inspect and replace components such as the brake pads. Aging parking brake: The parking brake makes abnormal noises or has aged; lubricant needs to be added or the brake needs to be replaced. Excessive gap between the friction plate and brake drum: Oil contamination or severe wear on the friction plate and brake drum, exposed rivets, or surface hardening causing slippage and malfunction; replace the brake pads and brake disc. How to use the auto hold function: When the driver has fastened the seat belt and the driver's side door is closed, with the engine running, press the auto hold switch to change the auto hold function from off to standby mode. When the brake pedal is pressed to a certain depth and the vehicle has completely stopped, the auto hold function changes from standby to parking mode. When the auto hold is in parking mode, after selecting the appropriate forward or reverse gear, pressing the accelerator pedal will cause the auto hold to release automatically based on the slope gradient.
5
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.