What to Do When the Engine Yellow Light Flashes and Shakes?

Why Does a Motorcycle Burn Engine Oil in Summer?

Motorcycle burning engine oil is due to the piston ring oil ring having insufficient elasticity and excessive light leakage. Insufficient elasticity and excessive light leakage: When the piston ring oil ring has insufficient elasticity and excessive light leakage, it leads to burning engine oil, which is a problem with the piston ring itself. If the gap between the valve stem and the valve guide is too large, or the valve oil seal does not seal tightly, this burning oil phenomenon is unrelated to the piston ring. Even after replacing the piston ring, the engine oil may still burn. Cylinder size deviation and excessive ovality: If the cylinder size is out of tolerance and the ovality is excessive, or if the surface has scratches or grooves, the oil ring cannot scrape off the excess oil on the cylinder wall, causing oil to enter the combustion chamber and participate in combustion. If the taper ring is installed upside down, it will scrape oil upward, also increasing oil consumption. If the piston rings are not staggered in position during assembly and are aligned in a straight line, oil consumption will sharply increase.

20

1

Share

Why is the Huasong 7's fuel consumption so high?

The official combined fuel consumption of the Huasong 7 is around 9.6L/100km. During the running-in period of a new car, the fuel consumption is slightly higher, which is normal. After the running-in period, the fuel consumption usually decreases by one to two units. However, fuel consumption is greatly affected by road conditions and personal driving habits, and it could even double. Below are detailed introductions about the Huasong 7: 1. Exterior: The Huasong 7's exterior resembles the Alphard, with a large blackened front grille that connects with the headlights to form a distinctive 'T' shape. The upper part of the grille is decorated with two thick chrome strips, with the logo positioned in between, giving it high recognition. 2. Interior: The interior design of the new car is stable and elegant, leaning towards a sedan style. The multifunctional three-spoke steering wheel is exquisitely shaped, and the center console layout is clear. The top model also features a large LCD screen in the center. The new car adopts a 2+2+3 seven-seat space layout and comes with abundant configurations.

16

1

Share

What Causes a Motorcycle Engine to Fail to Reach Higher RPMs?

Motorcycle engine failing to reach higher RPMs is caused by spark plug blockage. Incorrect coolant temperature sensor signal leading to RPM increase: Due to intermittent faults in the coolant temperature sensor, it transmits a coolant temperature far lower than the actual value, causing the control unit to mistakenly believe the engine is operating at low temperatures. This results in erroneous excessive air intake and fuel injection, leading to abnormal idle RPM increase, which can exceed 2000r/min. Battery depletion causing engine RPM increase: Severe battery depletion, combined with idle operation and multiple electrical devices being turned on, results in low generator efficiency at idle. This leads to insufficient power supply to the engine control unit, causing RPM fluctuations that can reach as high as 1400r/min to 1600r/min. Temporary RPM increase during gear shifting: The PASSAT2.0 uses an electronic throttle, where the speed and angle of throttle opening are not solely dependent on the accelerator pedal position as with previous mechanical throttles. It also takes into account engine stability and environmental considerations.

2

1

Share

Where is the VIN number located on a Land Rover?

Land Rover's VIN number is located at the lower left side of the front windshield. When you open the engine hood, the VIN can also be found next to the air shock absorber on the right side of the vehicle. Additional information: The Vehicle Identification Number (VIN), known in Chinese as the vehicle identification code, is a unique set of alphanumeric characters assigned by the manufacturer to identify a vehicle. The VIN consists of a 17-character code, also referred to as the 17-digit identification code, chassis number, or 17-digit number. Through various combinations, the VIN ensures that no two vehicles of the same model will have the same number within 30 years, providing a unique identifier for each vehicle, hence it's often called the 'car's ID card'. The VIN is like a fingerprint for the car. If the steel plate bearing the VIN is damaged, the owner must not attempt to cut out the section with the VIN. Instead, the vehicle should be kept in its damaged state and taken directly to the vehicle management department for certification to prove that the VIN plate is damaged. The department will then handle the situation according to the actual circumstances.

7

5

Share

Why Are Second-hand BYD S6 Cars So Cheap?

Because the market share of second-hand BYD S6 models is not high, and the frequent failures of the three major components of the car body lead to low prices. The following is an introduction to BYD-related content: Brand History: BYD Company Limited was founded in 1995, starting with a scale of more than 20 people. By 2003, it had grown into the world's second-largest rechargeable battery manufacturer and established BYD Auto in the same year. Starting as a battery manufacturer, BYD's entry into car manufacturing was essentially playing the role of an 'outsider.' It was through the use of the resounding name of 'independent intellectual property rights' and the acquisition of Qinchuan Auto that BYD gained a first-mover advantage over other newcomers. Brand Introduction: BYD Auto adheres to the development path of independent research and development, independent production, and independent branding, aiming to create truly cost-effective vehicles for the people. The product design not only draws on advanced international trends but also aligns with the aesthetic concepts of Chinese culture.

15

4

Share

How to Use the Honda Civic Wiper?

Vehicle steering wheel on the right side of the wiper control switch, clockwise turn is the rear wiper on, counterclockwise is off. Press the wiper control switch towards yourself for the front wiper water spray, press towards the dashboard for the rear wiper water spray. The following are the different operating states of the wiper: OFF: Front wiper stops working, which is the off position of the car wiper, rotate to this position to turn it off. INT: Automatic intermittent operation. Pull the lever down one notch, the wiper will start working automatically in an intermittent manner. This gear needs to be manually reset, suitable for light rain or snow. LO: Continuous operation. Pull the lever down one more notch, the wiper will operate continuously at an automatic rate; this gear also requires manual reset, suitable for heavier rain or snow. HI: Continuous high-speed operation. Pull the lever all the way down, the wiper will operate at high speed. This gear needs to be manually reset, suitable for heavy rain. Generally, in heavy rain conditions, even setting the wiper to the highest speed may not be effective. The best approach is to turn on the hazard lights, pull over, and wait for the rain to lessen before continuing.

20

1

Share

What to Do When the Engine Yellow Light Flashes and Shakes?

Why Does a Motorcycle Burn Engine Oil in Summer?

Why is the Huasong 7's fuel consumption so high?

What Causes a Motorcycle Engine to Fail to Reach Higher RPMs?

Where is the VIN number located on a Land Rover?

Why Are Second-hand BYD S6 Cars So Cheap?

How to Use the Honda Civic Wiper?

What is the 911 car?

Where is the Volkswagen Bora's ESP switch located?

What are the differences between the 2018 Lavida and the 2019 Lavida?

Why Does the Car Engine Sound Louder in Hot Weather?